snd_hda works on i386, fails on amd64 (RELENG_7)

[Rick C. Petty]

I was wondering if you received my message and if you had any further
insights.  I recently csup'd again and am attaching the newest output.
Although xmms2 is nice (I'm using a windows box as the server), it's
really annoying not to have native sound working in amd64.  Remember,
it works just fine if I boot up i386.

> On Tue, May 19, 2009 at 06:45:54AM +0300, Alexander Motin wrote:
> 
> > Could you boot with `hw.snd.verbose=4` to get maximum driver debugging. 

Including below, minus the lines related to the ATI card; I only care
about the onboard audio (hdac0).  See below for dmesg with
hw.snd.verbose=4.

Any help would be appreciated.  Thanks in advance,

-- Rick C. Petty


Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #1: Sat May 30 03:47:39 CDT 2009
    root at amd64-host:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Phenom(tm) 9600 Quad-Core Processor (2300.03-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f22  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,<b23>>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,<b5>,<b6>,<b7>,Prefetch,<b9>,<b10>>
  TSC: P-state invariant
  Cores per package: 4
usable memory = 8575410176 (8178 MB)
avail memory  = 8273821696 (7890 MB)
ACPI APIC Table: <070208 APIC1604>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <070208 RSDT1604> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x900-0x9ff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <processor> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe97e000-0xfe97efff irq 22 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 6 ports with 6 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe97fc00-0xfe97fcff irq 23 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 15 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 6 ports with 6 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe97d000-0xfe97dfff irq 20 at device 4.0 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 6 ports with 6 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe97f800-0xfe97f8ff irq 21 at device 4.1 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controller, 15 ports each: usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci1
usb3: USB revision 2.0
uhub3: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
atapci0: <nVidia nForce MCP77 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
hdac0: <NVidia MCP78 High Definition Audio Controller> mem 0xfe978000-0xfe97bfff irq 22 at device 7.0 on pci0
hdac0: HDA Driver Revision: 20090329_0131
hdac0: DMA Coherency: Uncacheable / vendor=0x10de
hdac0: [ITHREAD]
hdac0:     CORB size: 256
hdac0:     RIRB size: 256
hdac0:       Streams: ISS=4 OSS=4 BSS=0
hdac0: hdac_dma_alloc: size=1024 -> roundsz=1024
hdac0: hdac_dma_alloc: size=2048 -> roundsz=2048
hdac0: Reset controller...
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1

<snip>

hdac0: HDA Config: on=0x00000000 off=0x00000000
hdac0: Starting CORB Engine...
hdac0: Starting RIRB Engine...
hdac0: Enabling controller interrupt...
hdac0: Scanning HDA codecs ...
hdac0: Probing codec #0...
hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
hdac0: Codec #0 is not responding! Probing aborted.
hdac0: Probing codec #3...
hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
hdac0: Codec #3 is not responding! Probing aborted.
hdac0: 
hdac1: HDA Config: on=0x00000000 off=0x00000000

<snip>