acd0: setting up DMA failed

Wed Aug 12 13:05:31 UTC 2009

I compiled atapicam into the kernel, as you could see in the first mail. 
Of course I followed the instructions in the manual. All those programs 
are installed and some even made suid.
However, it still doesnt work right, therefore must be missing 
something. That's why I mailed this list ;)

Rick N wrote:
> breifly, at the risk of mentioning the obvious, which you may already know, did you: ?
>  
> atapicam_load="YES"   (in /boot/loader.conf), make sure the dvd+... tools port, cdrdao?, is also installed.
>  
> actually, just re-check your settings with the FreeBSD Handbook:
> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/
> under Storage -> Creating and using Optical Media (DVDs/CDs), ...
>  it contains a lot of other good tips as well.
>  
> 
> -hope some of this helps.
>  
> 
>  
>> Date: Wed, 12 Aug 2009 14:14:04 +0200
>> From: rick at mitranet.nl
>> To: freebsd-multimedia at freebsd.org
>> Subject: Re: acd0: setting up DMA failed
>>
>> *BUMP*
>>
>> Anyone ?
>>
>> Rick Wezenaar wrote:
>>> Hello all,
>>>
>>> I am getting the following error on my DVDRW drive:
>>>
>>> Aug 9 10:07:18 phenomium kernel: acd0: FAILURE - READ_BIG MEDIUM ERROR 
>>> asc=0x02 ascq=0x00
>>> Aug 9 10:07:18 phenomium kernel: (cd0:ata2:0:0:0): READ(10). CDB: 28 0 
>>> 0 5 77 e0 0 0 1 0
>>> Aug 9 10:07:18 phenomium kernel: (cd0:ata2:0:0:0): CAM Status: SCSI 
>>> Status Error
>>> Aug 9 10:07:18 phenomium kernel: (cd0:ata2:0:0:0): SCSI Status: Check 
>>> Condition
>>> Aug 9 10:07:18 phenomium kernel: (cd0:ata2:0:0:0): MEDIUM ERROR 
>>> info:577e0 asc:2,0
>>> Aug 9 10:07:18 phenomium kernel: (cd0:ata2:0:0:0): No seek complete
>>> Aug 9 10:07:18 phenomium kernel: (cd0:ata2:0:0:0): Retrying Command 
>>> (per Sense Data)
>>> Aug 9 10:07:18 phenomium kernel: ata3: FAILURE - zero length DMA 
>>> transfer attempted
>>> Aug 9 10:07:18 phenomium kernel: acd0: setting up DMA failed
>>> Aug 9 10:07:19 phenomium kernel: ata3: FAILURE - zero length DMA 
>>> transfer attempted
>>> etc.
>>>
>>> Also, k3b and xcdroast seem to have problems detecting the drive. They 
>>> keep complaining that they can not find an optical device. (which should 
>>> be /dev/cd0).
>>>
>>> Information about my system:
>>>
>>> uname:
>>> FreeBSD phenomium.mitranet.nl 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri 
>>> Aug 7 01:22:21 CEST 2009 
>>> root at phenomium.mitranet.nl:/usr/obj/usr/src/sys/PHENOMIUM02 amd64
>>>
>>> kernel (excerpt):
>>> cpu HAMMER
>>> ident PHENOMIUM02
>>> options QUOTA
>>> options IPFIREWALL
>>> options IPFIREWALL_VERBOSE
>>> options DUMMYNET
>>> options HZ=1000
>>> device atapicam
>>> device ata
>>> device atadisk
>>> device ataraid
>>> device atapicd
>>> device atapifd
>>> device atapist
>>> options ATA_STATIC_ID
>>> device scbus
>>> device ch
>>> device da
>>> device sa
>>> device cd
>>> device pass
>>>
>>> $ ls -la /dev/*cd*
>>> crw-rw-rw- 1 root operator 0, 99 Aug 9 02:42 acd0
>>> crw-r----- 1 root operator 0, 126 Aug 9 02:42 acd0t01
>>> crw-rw-rw- 1 root operator 0, 118 Aug 9 02:42 cd0
>>> $
>>>
>>> dmesg:
>>> Copyright (c) 1992-2009 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>> The Regents of the University of California. All rights reserved.
>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>> FreeBSD 7.2-RELEASE #0: Fri Aug 7 01:22:21 CEST 2009
>>> root at phenomium.mitranet.nl:/usr/obj/usr/src/sys/PHENOMIUM02
>>> Timecounter "i8254" frequency 1193182 Hz quality 0
>>> CPU: AMD Phenom(tm) 9850 Quad-Core Processor (2500.19-MHz K8-class CPU)
>>> Origin = "AuthenticAMD" Id = 0x100f23 Stepping = 3
>>>
>>> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> 
>>>
>>> Features2=0x802009<SSE3,MON,CX16,<b23>>
>>> AMD 
>>> Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
>>> AMD 
>>> Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,<b5>,<b6>,<b7>,Prefetch,<b9>,<b10>> 
>>>
>>> TSC: P-state invariant
>>> Cores per package: 4
>>> usable memory = 4280946688 (4082 MB)
>>> avail memory = 4108361728 (3918 MB)
>>> ACPI APIC Table: <122407 APIC1648>
>>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>>> cpu0 (BSP): APIC ID: 0
>>> cpu1 (AP): APIC ID: 1
>>> cpu2 (AP): APIC ID: 2
>>> cpu3 (AP): APIC ID: 3
>>> ioapic0 <Version 2.1> irqs 0-23 on motherboard
>>> kbd1 at kbdmux0
>>> acpi0: <122407 RSDT1648> on motherboard
>>> acpi0: [ITHREAD]
>>> acpi0: Power Button (fixed)
>>> acpi0: reservation of ffb80000, 80000 (3) failed
>>> acpi0: reservation of fff00000, 100000 (3) failed
>>> acpi0: reservation of 0, a0000 (3) failed
>>> acpi0: reservation of 100000, cff00000 (3) failed
>>> ACPI HPET table warning: Sequence is non-zero (2)
>>> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
>>> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>>> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on 
>>> acpi0
>>> Timecounter "HPET" frequency 14318180 Hz quality 900
>>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>>> pci0: <ACPI PCI bus> on pcib0
>>> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
>>> pci1: <ACPI PCI bus> on pcib1
>>> vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 
>>> 0xd0000000-0xdfffffff,0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci1
>>> hdac0: <ATI RV630 High Definition Audio Controller> mem 
>>> 0xfe9ec000-0xfe9effff irq 19 at device 0.1 on pci1
>>> hdac0: HDA Driver Revision: 20090329_0131
>>> hdac0: [ITHREAD]
>>> pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>>> pci2: <ACPI PCI bus> on pcib2
>>> re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe 
>>> Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 18 at 
>>> device 0.0 on pci2
>>> re0: Using 1 MSI messages
>>> re0: Chip rev. 0x38000000
>>> re0: MAC rev. 0x00000000
>>> miibus0: <MII bus> on re0
>>> rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
>>> rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
>>> 1000baseT-FDX, auto
>>> re0: Ethernet address: 00:1d:92:85:b3:ad
>>> re0: [FILTER]
>>> atapci0: <ATI IXP600 SATA300 controller> port 
>>> 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f 
>>> mem 0xfe8ff800-0xfe8ffbff irq 22 at device 18.0 on pci0
>>> atapci0: [ITHREAD]
>>> atapci0: AHCI Version 01.10 controller with 4 ports detected
>>> ata2: <ATA channel 0> on atapci0
>>> ata2: [ITHREAD]
>>> ata3: <ATA channel 1> on atapci0
>>> ata3: [ITHREAD]
>>> ata4: <ATA channel 2> on atapci0
>>> ata4: [ITHREAD]
>>> ata5: <ATA channel 3> on atapci0
>>> ata5: [ITHREAD]
>>> ohci0: <OHCI (generic) USB controller> mem 0xfe8fe000-0xfe8fefff irq 16 
>>> at device 19.0 on pci0
>>> ohci0: [GIANT-LOCKED]
>>> ohci0: [ITHREAD]
>>> usb0: OHCI version 1.0, legacy support
>>> usb0: SMM does not respond, resetting
>>> usb0: <OHCI (generic) USB controller> on ohci0
>>> usb0: USB revision 1.0
>>> uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
>>> uhub0: 2 ports with 2 removable, self powered
>>> ohci1: <OHCI (generic) USB controller> mem 0xfe8fd000-0xfe8fdfff irq 17 
>>> at device 19.1 on pci0
>>> ohci1: [GIANT-LOCKED]
>>> ohci1: [ITHREAD]
>>> usb1: OHCI version 1.0, legacy support
>>> usb1: SMM does not respond, resetting
>>> usb1: <OHCI (generic) USB controller> on ohci1
>>> usb1: USB revision 1.0
>>> uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
>>> uhub1: 2 ports with 2 removable, self powered
>>> ohci2: <OHCI (generic) USB controller> mem 0xfe8fc000-0xfe8fcfff irq 18 
>>> at device 19.2 on pci0
>>> ohci2: [GIANT-LOCKED]
>>> ohci2: [ITHREAD]
>>> usb2: OHCI version 1.0, legacy support
>>> usb2: SMM does not respond, resetting
>>> usb2: <OHCI (generic) USB controller> on ohci2
>>> usb2: USB revision 1.0
>>> uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
>>> uhub2: 2 ports with 2 removable, self powered
>>> ohci3: <OHCI (generic) USB controller> mem 0xfe8fb000-0xfe8fbfff irq 17 
>>> at device 19.3 on pci0
>>> ohci3: [GIANT-LOCKED]
>>> ohci3: [ITHREAD]
>>> usb3: OHCI version 1.0, legacy support
>>> usb3: SMM does not respond, resetting
>>> usb3: <OHCI (generic) USB controller> on ohci3
>>> usb3: USB revision 1.0
>>> uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
>>> uhub3: 2 ports with 2 removable, self powered
>>> ohci4: <OHCI (generic) USB controller> mem 0xfe8fa000-0xfe8fafff irq 18 
>>> at device 19.4 on pci0
>>> ohci4: [GIANT-LOCKED]
>>> ohci4: [ITHREAD]
>>> usb4: OHCI version 1.0, legacy support
>>> usb4: SMM does not respond, resetting
>>> usb4: <OHCI (generic) USB controller> on ohci4
>>> usb4: USB revision 1.0
>>> uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
>>> uhub4: 2 ports with 2 removable, self powered
>>> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff000-0xfe8ff0ff irq 
>>> 19 at device 19.5 on pci0
>>> ehci0: [GIANT-LOCKED]
>>> ehci0: [ITHREAD]
>>> usb5: EHCI version 1.0
>>> usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
>>> usb5: <EHCI (generic) USB 2.0 controller> on ehci0
>>> usb5: USB revision 2.0
>>> uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
>>> uhub5: 10 ports with 10 removable, self powered
>>> umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.29, addr 2> 
>>> on uhub5
>>> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
>>> atapci1: <ATI IXP600 UDMA133 controller> port 
>>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
>>> ata0: <ATA channel 0> on atapci1
>>> ata0: [ITHREAD]
>>> hdac1: <ATI SB600 High Definition Audio Controller> mem 
>>> 0xfe8f4000-0xfe8f7fff irq 16 at device 20.2 on pci0
>>> hdac1: HDA Driver Revision: 20090329_0131
>>> hdac1: [ITHREAD]
>>> isab0: <PCI-ISA bridge> at device 20.3 on pci0
>>> isa0: <ISA bus> on isab0
>>> pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
>>> pci3: <ACPI PCI bus> on pcib3
>>> pci3: <multimedia> at device 2.0 (no driver attached)
>>> em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xe800-0xe83f mem 
>>> 0xfebc0000-0xfebdffff,0xfeba0000-0xfebbffff irq 21 at device 3.0 on pci3
>>> em0: [FILTER]
>>> em0: Ethernet address: 00:1b:21:17:8f:61
>>> acpi_button0: <Power Button> on acpi0
>>> sio0: configured irq 4 not in bitmap of probed irqs 0
>>> sio0: port may not be enabled
>>> sio0: configured irq 4 not in bitmap of probed irqs 0
>>> sio0: port may not be enabled
>>> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
>>> acpi0
>>> sio0: type 16550A
>>> sio0: [FILTER]
>>> cpu0: <ACPI CPU> on acpi0
>>> acpi_throttle0: <ACPI CPU Throttling> on cpu0
>>> acpi_throttle0: CLK_VAL field overlaps THT_EN bit
>>> device_attach: acpi_throttle0 attach returned 6
>>> cpu1: <ACPI CPU> on acpi0
>>> cpu2: <ACPI CPU> on acpi0
>>> cpu3: <ACPI CPU> on acpi0
>>> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff on isa0
>>> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>>> kbd0 at atkbd0
>>> atkbd0: [GIANT-LOCKED]
>>> atkbd0: [ITHREAD]
>>> ppc0: cannot reserve I/O port range
>>> sc0: <System console> at flags 0x100 on isa0
>>> sc0: VGA <16 virtual consoles, flags=0x300>
>>> sio1: configured irq 3 not in bitmap of probed irqs 0
>>> sio1: port may not be enabled
>>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>>> ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 2> on uhub1
>>> kbd2 at ukbd0
>>> ums0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 2> on uhub1
>>> ums0: 8 buttons and Z dir.
>>> Timecounters tick every 1.000 msec
>>> ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based 
>>> forwarding disabled, default to deny, logging unlimited
>>> ad0: 38172MB <MAXTOR 6L040J2 A93.0500> at ata0-master UDMA133
>>> ad4: 715404MB <SAMSUNG HD753LJ 1AA01109> at ata2-master SATA300
>>> acd0: DVDR <Optiarc DVD RW AD-7203S/1.04> at ata3-master SATA150
>>> hdac0: HDA Codec #0: ATI R6xx HDMI
>>> pcm0: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0
>>> hdac1: HDA Codec #0: Realtek ALC888
>>> pcm1: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac1
>>> pcm2: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac1
>>> pcm3: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac1
>>> GEOM_LABEL: Label for provider ad0s1a is ufsid/4a76ae87acea749e.
>>> GEOM_LABEL: Label for provider ad0s1d is ufsid/4a76ae9edced99b2.
>>> GEOM_LABEL: Label for provider ad0s1e is ufsid/4a76ae9d2d7dce0a.
>>> GEOM_LABEL: Label for provider ad0s1f is ufsid/4a76ae9d00089a00.
>>> GEOM_LABEL: Label for provider ad4s1 is ntfs/XP_Pro_x64_UK.
>>> GEOM_LABEL: Label for provider ad4s3 is ufsid/4a76ae871cba9765.
>>> GEOM_LABEL: Label for provider ad4s5 is msdosfs/D0-P2.
>>> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
>>> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
>>> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
>>> (probe0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
>>> (probe0:umass-sim0:0:0:0): Medium not present
>>> (probe0:umass-sim0:0:0:0): Unretryable error
>>> (probe1:ata2:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
>>> (probe1:ata2:0:0:0): CAM Status: SCSI Status Error
>>> (probe1:ata2:0:0:0): SCSI Status: Check Condition
>>> (probe1:ata2:0:0:0): NOT READY asc:3a,0
>>> (probe1:ata2:0:0:0): Medium not present
>>> (probe1:ata2:0:0:0): Unretryable error
>>> (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
>>> (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error
>>> (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition
>>> (probe0:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
>>> (probe0:umass-sim0:0:0:1): Medium not present
>>> (probe0:umass-sim0:0:0:1): Unretryable error
>>> (probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
>>> (probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error
>>> (probe0:umass-sim0:0:0:2): SCSI Status: Check Condition
>>> (probe0:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
>>> (probe0:umass-sim0:0:0:2): Medium not present
>>> (probe0:umass-sim0:0:0:2): Unretryable error
>>> (probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
>>> (probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error
>>> (probe0:umass-sim0:0:0:3): SCSI Status: Check Condition
>>> (probe0:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
>>> (probe0:umass-sim0:0:0:3): Medium not present
>>> (probe0:umass-sim0:0:0:3): Unretryable error
>>> SMP: AP CPU #1 Launched!
>>> SMP: AP CPU #3 Launched!
>>> SMP: AP CPU #2 Launched!
>>> da0 at umass-sim0 bus 0 target 0 lun 0
>>> da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
>>> da0: 40.000MB/s transfers
>>> da0: Attempt to query device size failed: NOT READY, Medium not present
>>> cd0 at ata2 bus 0 target 0 lun 0
>>> cd0: <Optiarc DVD RW AD-7203S 1.04> Removable CD-ROM SCSI-0 device
>>> cd0: 3.300MB/s transfers
>>> cd0: Attempt to query device size failed: NOT READY, Medium not present
>>> da1 at umass-sim0 bus 0 target 0 lun 1
>>> da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
>>> da1: 40.000MB/s transfers
>>> da1: Attempt to query device size failed: NOT READY, Medium not present
>>> da2 at umass-sim0 bus 0 target 0 lun 2
>>> da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
>>> da2: 40.000MB/s transfers
>>> da2: Attempt to query device size failed: NOT READY, Medium not present
>>> da3 at umass-sim0 bus 0 target 0 lun 3
>>> da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
>>> da3: 40.000MB/s transfers
>>> da3: Attempt to query device size failed: NOT READY, Medium not present
>>> Trying to mount root from ufs:/dev/ad0s1a
>>> GEOM_LABEL: Label ufsid/4a76ae87acea749e removed.
>>> GEOM_LABEL: Label for provider ad0s1a is ufsid/4a76ae87acea749e.
>>> GEOM_LABEL: Label ufsid/4a76ae871cba9765 removed.
>>> <11G8>/dev/ad4s3d: FILE SYSTEM CLEAN; SKIPPIENG CHECKS
>>> OM_
>>> BEL: Label ufsid/4a76ae9d2d7dce0a removed.
>>> GEOM_LABEL: Label for provider ad4s3 is ufsid/4a76ae871cba9765.
>>> GEOM_LABEL: Label for provider ad0s1e is ufsid/4a76ae9d2d7dce0a.
>>> GEOM_LABEL: Label ufsid/4a76ae9d00089a00 removed.
>>> GEOM_LABEL: Label for provider ad0s1f is ufsid/4a76ae9d00089a00.
>>> GEOM_LABEL: Label ufsid/4a76ae9edced99b2 removed.
>>> GEOM_LABEL: Label for provider ad0s1d is ufsid/4a76ae9edced99b2.
>>> GEOM_LABEL: Label ufsid/4a76ae87acea749e removed.
>>> GEOM_LABEL: Label ufsid/4a76ae871cba9765 removed.
>>> GEOM_LABEL: Label ufsid/4a76ae9d2d7dce0a removed.
>>> GEOM_LABEL: Label ufsid/4a76ae9d00089a00 removed.
>>> GEOM_LABEL: Label ufsid/4a76ae9edced99b2 removed.
>>> netsmb_dev: loaded
>>> drm0: <ATI Radeon HD 2600 Pro> on vgapci0
>>> vgapci0: child drm0 requested pci_enable_busmaster
>>> info: [drm] Initialized radeon 1.29.0 20080528
>>> info: [drm] Setting GART location based on new memory map
>>> info: [drm] Loading RV630 CP Microcode
>>> info: [drm] Loading RV630 PFP Microcode
>>> info: [drm] Resetting GPU
>>> info: [drm] writeback test succeeded in 1 usecs
>>> drm0: [ITHREAD]
>>>
>>> $ camcontrol devlist
>>> <Generic USB SD Reader 1.00> at scbus0 target 0 lun 0 (pass0,da0)
>>> <Generic USB CF Reader 1.01> at scbus0 target 0 lun 1 (pass1,da1)
>>> <Generic USB SM Reader 1.02> at scbus0 target 0 lun 2 (pass2,da2)
>>> <Generic USB MS Reader 1.03> at scbus0 target 0 lun 3 (pass3,da3)
>>> <Optiarc DVD RW AD-7203S 1.04> at scbus3 target 0 lun 0 (pass4,cd0)
>>> $
>>>
>>> $ cat /etc/devfs.conf | grep perm
>>> perm acd0 0666
>>> perm cd0 0666
>>> perm xpt0 0666
>>> perm pass0 0666
>>> perm pass1 0666
>>> perm pass2 0666
>>> perm pass4 0666
>>> $
>>>
>>> $ cat /boot/loader.conf
>>> snd_hda_load="YES"
>>> sem_load="YES"
>>> hw.ata.atapi_dma=1
>>> $
>>>
>>> hal daemon and dbus daemon are both running.
>>>
>>> Does anyone have an idea what the problem might be, and if there is a 
>>> solution to it ?
>>>
>>> Thanks,
>>>
>>> Rick
>>> _______________________________________________
>>> freebsd-multimedia at freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
>>> To unsubscribe, send any mail to 
>>> "freebsd-multimedia-unsubscribe at freebsd.org"
>> _______________________________________________
>> freebsd-multimedia at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
>> To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe at freebsd.org"
> 
> _________________________________________________________________
> More storage. Better anti-spam and antivirus protection. Hotmail makes it simple.
> http://go.microsoft.com/?linkid=9671357_______________________________________________
> freebsd-multimedia at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
> To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe at freebsd.org"