snd_csa driver problem in 7.0-RELEASE on IBM T20

Kurt Rosenfeld hardware at ee.ccny.cuny.edu
Tue May 13 19:31:35 UTC 2008


On Tue, May 13, 2008 at 08:36:13PM +0900, WATANABE Kazuhiro wrote:
> Hi.
> 
> At Sat, 10 May 2008 21:49:26 -0400,
> Kurt Rosenfeld wrote:
> > Hello,
> > 
> > I'm running 7.0-RELEASE with the GENERIC kernel.  The sound
> > chip in my IBM T20 laptop uses the snd_csa driver.  When I
> > kldload the snd_csa driver, this is written to the system
> > log:
> > 
> > csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xe8100000-0xe8100fff,0xe8000000-0xe80fffff irq 11 at device 5.0 on pci0
> > csa: card is Thinkpad 600X/A20/T20
> > csa0: [GIANT-LOCKED]
> > csa0: [ITHREAD]
> > device_attach: csa0 attach returned 6
> > 
> > and there is no /dev/dsp* driver.  kldstat gives
> > this:
> > 
> > $ kldstat
> > Id Refs Address    Size     Name
> >  1    9 0xc0400000 906518   kernel
> >  2    1 0xc0d07000 6a32c    acpi.ko
> >  3    1 0xc23f8000 22000    linux.ko
> >  4    1 0xc27a5000 7000     snd_csa.ko
> >  5    2 0xc27ac000 3f000    sound.ko
> > 
> > I tested it on two T20 laptops with the same result.
> > It works under Linux.  Any idea what the problem
> > might be?  thanks, -kurt
> > 
> > Here is the complete dmesg output:
> > 
> > Copyright (c) 1992-2008 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> > 	The Regents of the University of California. All rights reserved.
> > FreeBSD is a registered trademark of The FreeBSD Foundation.
> > FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
> >     root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Intel Pentium III (189.32-MHz 686-class CPU)
> >   Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
> >   Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> > real memory  = 268369920 (255 MB)
> > avail memory = 248623104 (237 MB)
> > kbd1 at kbdmux0
> > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> > hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
> > acpi0: <PTLTD   RSDT> on motherboard
> > acpi0: [ITHREAD]
> > acpi0: Power Button (fixed)
> > acpi0: reservation of 0, a0000 (3) failed
> > acpi0: reservation of 100000, ff00000 (3) failed
> > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> > acpi_ec0: <Embedded Controller: GPE 0x9, GLK> port 0x62,0x66 on acpi0
> > cpu0: <ACPI CPU> on acpi0
> > acpi_throttle0: <ACPI CPU Throttling> on cpu0
> > acpi_lid0: <Control Method Lid Switch> on acpi0
> > acpi_button0: <Sleep Button> on acpi0
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
> > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> > pci1: <ACPI PCI bus> on pcib1
> > vgapci0: <VGA-compatible display> mem 0xf0000000-0xf7ffffff irq 11 at device 0.0 on pci1
> > cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0
> > cardbus0: <CardBus bus> on cbb0
> > pccard0: <16-bit PCCard bus> on cbb0
> > cbb0: [ITHREAD]
> > cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 2.1 on pci0
> > cardbus1: <CardBus bus> on cbb1
> > pccard1: <16-bit PCCard bus> on cbb1
> > cbb1: [ITHREAD]
> > pci0: <multimedia, audio> at device 5.0 (no driver attached)
> > isab0: <PCI-ISA bridge> at device 7.0 on pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1800-0x180f at device 7.1 on pci0
> > ata0: <ATA channel 0> on atapci0
> > ata0: [ITHREAD]
> > ata1: <ATA channel 1> on atapci0
> > ata1: [ITHREAD]
> > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1820-0x183f irq 11 at device 7.2 on pci0
> > uhci0: [GIANT-LOCKED]
> > uhci0: [ITHREAD]
> > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> > usb0: USB revision 1.0
> > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> > uhub0: 2 ports with 2 removable, self powered
> > pci0: <bridge> at device 7.3 (no driver attached)
> > acpi_tz0: <Thermal Zone> on acpi0
> > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > kbd0 at atkbd0
> > atkbd0: [GIANT-LOCKED]
> > atkbd0: [ITHREAD]
> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
> > psm0: [GIANT-LOCKED]
> > psm0: [ITHREAD]
> > psm0: model Generic PS/2 mouse, device ID 0
> > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> > fdc0: [FILTER]
> > sio0: configured irq 4 not in bitmap of probed irqs 0
> > sio0: port may not be enabled
> > battery0: <ACPI Control Method Battery> on acpi0
> > acpi_acad0: <AC Adapter> on acpi0
> > sio0: configured irq 4 not in bitmap of probed irqs 0
> > sio0: port may not be enabled
> > pmtimer0 on isa0
> > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xe0000-0xeffff pnpid ORM0000 on isa0
> > ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
> > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> > ppbus0: <Parallel port bus> on ppc0
> > ppbus0: [ITHREAD]
> > plip0: <PLIP network interface> on ppbus0
> > lpt0: <Printer> on ppbus0
> > lpt0: Interrupt-driven port
> > ppi0: <Parallel I/O> on ppbus0
> > ppc0: [GIANT-LOCKED]
> > ppc0: [ITHREAD]
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > sio0: configured irq 4 not in bitmap of probed irqs 0
> > sio0: port may not be enabled
> > sio0: configured irq 4 not in bitmap of probed irqs 0
> > sio0: port may not be enabled
> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> > sio0: type 8250 or not responding
> > sio0: [FILTER]
> > sio1: configured irq 3 not in bitmap of probed irqs 0
> > sio1: port may not be enabled
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> > Timecounter "TSC" frequency 189322216 Hz quality 800
> > Timecounters tick every 1.000 msec
> > hptrr: no controller detected.
> > wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1
> > wi0: [ITHREAD]
> > wi0: using Lucent Technologies, WaveLAN/IEEE
> > wi0: Lucent Firmware: Station (8.10.1)
> > wi0: Ethernet address: 00:02:2d:1f:c0:24
> > ad0: 19077MB <IBM DJSA-220 JS4IAC6A> at ata0-master UDMA33
> > acd0: CDRW <DW-28E/2.1A> at ata1-master UDMA33
> > Trying to mount root from ufs:/dev/ad0s1a
> > wi0: link state changed to DOWN
> > csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xe8100000-0xe8100fff,0xe8000000-0xe80fffff irq 11 at device 5.0 on pci0
> > csa: card is Thinkpad 600X/A20/T20
> > csa0: [GIANT-LOCKED]
> > csa0: [ITHREAD]
> > device_attach: csa0 attach returned 6
> 
> How about this (modify DELAY() values)?
> 
>  Thinkpad T23 Setup (part 1)
>  http://docs.freebsd.org/cgi/getmsg.cgi?fetch=135463+0+archive/2002/freebsd-mobile/20020519.freebsd-mobile
> 
> ---
> WATANABE Kazuhiro (CQG00620 at nifty.ne.jp)

Thanks for your response.  Since posting, I noticed that the soundcard
works when ACPI is disabled at the startup menu.  Is this a useful
clue?  -kurt


More information about the freebsd-multimedia mailing list