kbtv and saa card (Philips saa7134)

[Torfinn Ingolfsen]

Hello,
I'm trying out the latest kbtv from ports (kbtv-1.2.4_1) with this card:
saa0 at pci2:1:0:  class=0x048000 card=0x002b11bd chip=0x71341131 rev=0x01 hdr=0x00
    vendor     = 'Philips Semiconductors'
    device     = 'SAA7134HL Multimedia Capture Device'
    class      = multimedia

since I had this card lying around.

dmesg shows:
Feb 20 22:27:06 kg-quiet kernel: saa0: <Phillips SAA7134 AV broadcast decoder> mem 0xfddff000-0xfddff3ff 
irq 21 at device 1.0 on pci2
Feb 20 22:27:06 kg-quiet kernel: iicbus0: <SAA713x I2C Controller> on saa0
Feb 20 22:27:06 kg-quiet kernel: iic0: <I2C generic I/O> on iicbus0

But when kbtv tries to tune channels I get lots of these messages in /var/log/messages:
Feb 20 22:36:23 kg-quiet kernel: iicbus0: START: bus error (status 0x9 loop:12)
Feb 20 22:39:34 kg-quiet kernel: iicbus0: START: bus error (status 0x9 loop:12)
Feb 20 22:39:38 kg-quiet last message repeated 99 times
Feb 20 22:39:38 kg-quiet kernel: iicbus0: START: bus error (status 0x9 loop:13)
Feb 20 22:39:38 kg-quiet kernel: iicbus0: START: bus error (status 0x9 loop:12)
Feb 20 22:39:39 kg-quiet last message repeated 23 times
Feb 20 22:39:39 kg-quiet kernel: iicbus0: START: bus error (status 0x9 loop:14)
Feb 20 22:39:39 kg-quiet kernel: iicbus0: START: bus error (status 0x9 loop:12)

Any hints for debugging?

I am running FreeBSD 6.3-stable (amd64):
root at kg-quiet# uname -a
FreeBSD kg-quiet.kg4.no 6.3-STABLE FreeBSD 6.3-STABLE #20: Thu Jan 24 00:42:47 CET 2008     root at kg-quiet.kg4.no:/usr/obj/usr/src/sys/QUIET  amd64


-- 
Regards,
Torfinn Ingolfsen,
Norway