latest pvrxxx ; 20071304 ; choppy audio/video still - UPDATE
solarux at hotmail.com
Mon Apr 16 18:10:49 UTC 2007
-update; With a (much deserverd) thanks to usleep, and all on this list my
pvr-350 (NTSC) is workin very well now; A/V receptoin (via CableTV),and
channel selection via ...setchannel <freq.>, ... are all OK.
-so far so good.
hey, if there's anything you think I could try n help with, just let me
know, since I'll probably be asking more questions as I learn myself.
>From: usleepless at gmail.com
>To: "Rick Nekus" <solarux at hotmail.com>
>Subject: Re: latest pvrxxx ; 20071304 ; choppy audio/video still
>Date: Sat, 14 Apr 2007 21:09:34 +0200
>On 4/14/07, Rick Nekus <solarux at hotmail.com> wrote:
>>Hi all, update regarding latest pvrxxx-20071304
>>Tunercard: pvr-350 , Tuner NTSC see dmesg below for details.
>>I replaced my aerial (possible interference issues) with a Cable-TV
>>so far so good!, finally getting A/V on all 70 channels, (using
>>...setchannel freq) with no errors in messages yet.
>>A/V is choppy though.
>>but its crappy( hard to explain really unless you see it, but the picture
>>cut in half, and the soound is choppy) -The pvr-350 is ok I checked it
>>recently again in another box.
>>It seems its a "sync" issue with the my Tuner -but I'm just guessing here.
>>Sean, I'm curious is yours pvr500 and NTSC-tuner, or pvr350 ?, NTSC
>>frequenciy settings should be standard anyway, obviously our tuners maybe
>>different, -I must have an oddball.
>>cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf4000000-0xf7ffffff irq 21 at
>>device 10.0 on pci2
>>cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
>>iicbb0: <I2C bit-banging driver> on cxm_iic0
>>iicbus0: <Philips I2C bus> on iicbb0 master-only
>><2>tveeprom: ivtv version
>><2>tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 9939981
>><2>tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
>><2>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
>><2>tveeprom: audio processor = MSP4448 (type = 1b)
>><2>tveeprom: decoder processor = SAA7115 (type = 13)
>>tuner type: 47
>>cxm0: Eeprom NTSC
>>tuner: type set to 47 (LG NTSC (TAPE series)) by cxm
>>tuner: switching to v4l2
>>tuner: tv freq set to 61.25
>>tuner: tv 0x06 0xb0 0x8e 0x01
>>cxm0: SAA7115 rev 1 video decoder
>>cxm0: MSP4448G-A2 audio decoder
>>cxm0: IR Remote
>>cxm0: encoder firmware version 0x2060039
>>cxm0: decoder firmware version 0x2020023
>>tuner: tv freq set to 265.25
>>tuner: tv 0x13 0x70 0x8e 0x02
>is it ok for me to come in and check it out myself now you have cable?
>is the IP address the same?
Get the Kung Fu Bunny Theme pack free!
More information about the freebsd-multimedia