pvr-350 not working - how to debug?

[Anders Troback]

On Sun, 8 Apr 2007 14:23:13 +0200
usleepless at gmail.com wrote:

> Anders,
> 
> On 4/8/07, Anders Troback <freebsd at troback.com> wrote:
> > On Sun, 8 Apr 2007 13:40:02 +0200
> > usleepless at gmail.com wrote:
> >
> > > Anders,
> > >
> > > On 4/8/07, Anders Troback <freebsd at troback.com> wrote:
> > > > On Sat, 7 Apr 2007 21:35:41 +0200
> > > > usleepless at gmail.com wrote:
> > > >
> > > > >
> > > > > anyhow: please test:
> > > > >   http://usleepless.110mb.com/pvrxxx_port-07042007.tgz
> > > > >
> > > > > i got tired of the "not supported tuner" requests and
> > > > > problems. i have integrated the linux tuner-module and
> > > > > eeprom-module. so if i am not mistaken, now all tuners ( that
> > > > > linux supports ) are supported.
> > > > >
> > > > > let me know.
> > > > >
> > > >
> > > > Hi,
> > > >
> > > > I have no signal and if I play around with pvr250-setchannel my
> > > > box segfaults! I don't know if my card works in Linux...!
> > > >
> > > > dmesg:
> > > > cxm0: <Conexant iTVC15 MPEG Coder> mem 0xe8000000-0xebffffff at
> > > > device 10.0 on pci2 cxm_iic0: <Conexant iTVC15 / iTVC16 I2C
> > > > controller> on cxm0 iicbb0: <I2C bit-banging driver> on cxm_iic0
> > > > iicbus0: <Philips I2C bus> on iicbb0 master-only
> > > > tuner type: 4
> > > > cxm0: SAA7115 rev 1 video decoder
> > > > cxm0: MSP4418G-B3 audio decoder
> > > > cxm0: IR Remote
> > > > cxm0: [FAST]
> > > >
> > > > uname -a:
> > > > FreeBSD tv.troback.com 6.2-STABLE FreeBSD 6.2-STABLE #1: Sat
> > > > Apr  7 23:39:37 CEST 2007
> > > > root at tv.troback.com:/usr/obj/usr/src/sys/PVR i386
> > > >
> > > > pvr250-setchannel 7:
> > > > cxm0: tuner failed to lock
> > >
> > > is there no more info in /var/log/messages? ( big  chunk of tuner
> > > info ? )
> > >
> > > regards,
> > >
> > > usleep
> >
> > No boot if I load the cxm module I got this in dmesg:
> >
> > warning: KLD '/boot/modules/cxm_iic.ko' is newer than the
> > linker.hints
> 
> what's this ^ ?
> 
> > file cxm0: <Conexant iTVC15 MPEG Coder> mem 0xe8000000-0xebffffff
> > irq 22 at device 10.0 on pci2 cxm_iic0: <Conexant iTVC15 / iTVC16
> > I2C
> > controller> on cxm0 iicbb0: <I2C bit-banging driver> on cxm_iic0
> > iicbus0: <Philips I2C bus> on iicbb0 master-only
> > <2>tveeprom: ivtv version
> > <2>tveeprom: Hauppauge: model = 48139, rev = K2B7, serial# = 8889589
> > <2>tveeprom: tuner = Philips FM1216ME MK5 (idx = 117, type = 4)
> > <2>tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K)
> > (eeprom = 0x74, v4l2 = 0x00400e17) <2>tveeprom: audio processor =
> > MSP4418 (type = 19) <2>tveeprom: decoder processor = SAA7115 (type
> > = 13) tuner type: 4
> > cxm0: SAA7115 rev 1 video decoder
> > cxm0: MSP4418G-B3 audio decoder
> > cxm0: IR Remote
> > <2>cxm 0-0000: Video signal:              not present
> > <2>cxm 0-0000: Detected format:           0x0
> > <2>cxm 0-0000: Detected audio mode:       mono
> > <2>cxm 0-0000: Detected audio standard:   not defined
> > <2>cxm 0-0000: Audio muted:               no
> > <2>cxm 0-0000: Audio microcontroller:     stopped
> > <2>cxm 0-0000: Configured audio standard: undefined
> > <2>cxm 0-0000: Configured audio mode:     MONO1 (LANGUAGE A/Mono L+R
> > channel for BTSC, EIAJ, A2) <2>cxm 0-0000: Specified standard:
> > automatic detection <2>cxm 0-0000: Specified input:           Tuner
> > <2>cxm 0-0000: Specified audio input:     Tuner
> > <2>cxm 0-0000: Specified audioclock freq: undefined
> > <2>cxm 0-0000: Preferred audio mode:      mono/language A
> > cxm0: [FAST]
> > cxm0: encoder firmware version 0x2060039
> > cxm0: decoder firmware version 0x2020023
> 
> is there a cable attached to the card? if not, what exactly are you
> testing?
> 
> please tune with:
>   pvr250-setchannel 217.25
> 
> omit other options for the time being, it is supposed to detect your
> format (PAL/NTSC), and set the defaults correctly. channel tuning is
> not yet supported in this version with the linux-tuner. the other
> options still call the cxm-tuner, which is not initialized anymore and
> therefore crashes.
> 
> regards,
> 
> usleep

# pvr250-setchannel 280.25

==> /var/log/messages <==
Apr  8 15:40:45 tv kernel: before tuner_command!
Apr  8 15:40:45 tv kernel: tuner: tv freq set to 540.00
Apr  8 15:40:45 tv kernel: tuner: Huh? tv_set is NULL?
Apr  8 15:40:45 tv kernel: cxm0: tuner failed to lock


# pvr250-setchannel 280,25

==> /var/log/messages <==
Apr  8 15:45:43 tv kernel: cxm0: tuner failed to lock


-- 

================================================================
How many Microsoft employees does it take to screw in a light bulb?
None, they declare darkness a new standard.
----------------------------------------------------------------
Anders Trobäck
http://www.troback.com/
-
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-multimedia/attachments/20070408/91409278/signature.pgp