no sound with the HDA patch

[Vulpes Velox]

On Sun, 1 Oct 2006 06:50:10 -0400 (EDT)
v.velox at vvelox.net wrote:

> > On Sat, 30 Sep 2006 19:51:20 -0400 (EDT)
> > v.velox at vvelox.net wrote:
> >> > On Sat, 30 Sep 2006 18:33:55 -0400 (EDT)
> >> > v.velox at vvelox.net wrote:
> >> >> There is no playback on the HDA chip on the Toshiba Satellite
> >> >P100 > series of laptops. This is true for the line out, head
> >> >phones out, > and speakers.
> >> >>
> >> >> dmesg...
> >> >> pcm0: <Intel 82801G High Definition Audio Controller> mem
> >> >> 0xd2400000-0xd2403fff irq 22 at device 27.0 on pci0
> >> >> pcm0: <HDA Codec: Conexant (Unknown)>
> >> >> pcm0: <HDA Driver Revision: 20060929_0026>
> >> >>
> >> >>
> >> > Verbose dmesg, please.
> >>
> >> What does verbose mean in this case? I am not finding any flag or
> >> the like for more verbose output in the dmesg man page.
> >>
> >
> > Here:
> >
> > http://lists.freebsd.org/pipermail/freebsd-multimedia/2006-September/004720.html
> 
> #uname -a
> FreeBSD chama.vulpes 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #1: Fri
> Sep 29 23:39:34 UTC 2006
> kitsune at charma.vulpes:/usr/obj/usr/src/sys/SMP  i386
> 
> #pciconf -lv | grep -B 4 multimedia
>     subclass = PCI-PCI
> pcm0 at pci0:27:0: class=0x040300 card=0xff311179 chip=0x27d88086
> rev=0x02 hdr=0x00
>     vendor   = 'Intel Corporation'
>     device   = '82801G (ICH7 Family) High Definition Audio'
>     class    = multimedia
> 
> # sysctl hw.snd.verbose=2 ; cat /dev/sndstat
> hw.snd.verbose: 1 -> 2
> FreeBSD Audio Driver (newpcm)
> Installed devices:
> pcm0: <Intel 82801G High Definition Audio Controller> at memory
> 0xd2400000 irq 22 kld snd_hda [20060929_0026] (1p/1r/0v channels
> duplex default) [pcm0:play:0:dsp0.0]: spd 0, fmt
> 0x00000000/0x00000008, flags 0x00000000, 0x00000000
>         interrupts 0, underruns 0, ready 0 [b:16384/8192/2|bs:0/0/0]
>         {userland} -> feeder_root(0x00000000) -> {hardware}
>         [pcm0:record:0:dsp0.1]: spd 0, fmt 0x00000000/0x00000008,
> flags 0x00000000, 0x00000000
>         interrupts 0, overruns 0, hfree 16384, sfree 0
> [b:16384/8192/2|bs:0/0/0]
>         {hardware} -> feeder_root(0x00000000) -> {userland}
> 
> # sysctl hw.snd
> hw.snd.targetirqrate: 32
> hw.snd.report_soft_formats: 1
> hw.snd.verbose: 2
> hw.snd.unit: 0
> hw.snd.maxautovchans: 0
> hw.snd.pcm0.buffersize: 16384
> hw.snd.pcm0.vchans: 0
> 
> # mixer
> Mixer vol      is currently set to  75:75
> Mixer pcm      is currently set to  75:75
> Mixer mic      is currently set to   0:0
> Mixer cd       is currently set to  75:75
> Mixer rec      is currently set to   0:0
> Recording source: mic
> 
> #dmesg | grep pcm0:
> <included as pcm0.out>


Just tested with todays patch and I am not seeing any change. Any
thing I could help with or the like in this area?