atiixp and hardware volume controller

[Marat N.Afanasyev]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Ariff Abdullah wrote:
> On Tue, 14 Feb 2006 00:00:32 +0300
> "Marat N.Afanasyev" <amarat at ksu.ru> wrote:
> 
>>it works, thanks a lot!
>>
> 
> Can you describe more about your notebook? Brand/model
> number/vendor/series, anything.
> 
> 
> --
> Ariff Abdullah
> FreeBSD

it's our Russian brand. Maxselect x710s, it's that this is Microstar
barebone, more information can be found at http://maxselect.ru/, but
only in russian language. Turion-based, wide-screen, ati x700 video,
ixp400 chipset ;) pcmcia type II, card-reader, USB, firewire, dvd-rw,
etc. dmesg from this notebook is attached

- --
SY, Marat
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (FreeBSD)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iQCVAwUBQ/Xu9ZwEl3JiHF86AQLlOAQAnl64fDcQNk4ylAPN2XDYGQiM6cNJxlI3
jwW+x9XHjRW82eYTYuiZi/ar7AMkuKJyfBBen02S16kouDNXN+5cxSkpsJXqcdxT
JqrlPxOXZV5elhMSH2BETZlckd0Uxyk/GLunviJ+9tGjT6to2JEPpZIsucld3FmM
bRM6UVMxn1E=
=Rj0F
-----END PGP SIGNATURE-----
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p4 #3: Sat Feb  4 14:39:37 UTC 2006
    root at swamp.lnet:/usr/obj/usr/src/sys/SWAMP
ACPI APIC Table: <PTLTD  	 APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile AMD Sempron(tm) Processor 2800+ (1591.86-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20fc2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xc2500800<SYSCALL,NX,MMX+,<b25>,3DNow+,3DNow>
real memory  = 1072234496 (1022 MB)
avail memory = 1040371712 (992 MB)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 0 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
unknown: I/O range not supported
unknown: I/O range not supported
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
acpi0: reservation of fee00000, 1000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
myk0: <Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.1.3> port 0xa000-0xa0ff mem 0xc0100000-0xc0103fff irq 18 at device 0.0 on pci2
myk0: Ethernet address: 00:03:25:1b:42:56
ohci0: <OHCI (generic) USB controller> mem 0xc0500000-0xc0500fff irq 19 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xc0501000-0xc0501fff irq 19 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0502000-0xc0502fff irq 19 at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: (0x1002) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
cbb0: <PCI-CardBus Bridge> mem 0xc0206000-0xc0206fff irq 20 at device 7.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xc0208000-0xc02087ff,0xc0200000-0xc0203fff irq 21 at device 7.2 on pci3
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:03:25:21:48:00:02:29
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:03:25:00:02:29
fwe0: Ethernet address: 02:03:25:00:02:29
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci3: <mass storage> at device 7.3 (no driver attached)
pci3: <base peripheral> at device 7.4 (no driver attached)
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xc0207000-0xc0207fff irq 23 at device 9.0 on pci3
iwi0: Ethernet address: 00:12:f0:6e:49:bc
pcm0: <ATI IXP 400> mem 0xc0503400-0xc05034ff irq 17 at device 20.5 on pci0
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xce800-0xcffff,0xe7000-0xe7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1591856301 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 95396MB <FUJITSU MHU2100AT 00000008> at ata0-master UDMA100
acd0: DVDR <HL-DT-ST DVD-RW GCA-4080N/0G34> at ata1-master UDMA33
pcm0: <Analog Devices AD1981B AC97 Codec>
Trying to mount root from ufs:/dev/ad0s1a
myk0: link up