Snd_ich on amd64 6.0B4

[K Wieland]

Hello,

I had a quick question.

First, I have a custom kernel with the sound for my chipset (nForce3  
250, AC '97, supported by snd_ich)

device sound
device snd_ich

Below is a copy of my dmesg.  If you need other info, let me know.

There is no mention whatsoever of the sound, whereas in 5.4 there was  
at least a message.  The funny thing is that the sound devices are  
still present and work.

Is this a bug or just a change for 6.0?

Thanks,

Kristopher Wieland

FreeBSD kawhomepc.wustl.edu 6.0-BETA4 FreeBSD 6.0-BETA4 #2: Sat Sep 17  
22:21:53 CDT 2005      
root at kawhomepc.wustl.edu:/usr/obj/usr/src/sys/kawkernel  amd64
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA4 #2: Sat Sep 17 22:21:53 CDT 2005
     root at kawhomepc.wustl.edu:/usr/obj/usr/src/sys/kawkernel
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (2009.79-MHz K8-class CPU)
   Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
    
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE, 
MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
   AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 1073676288 (1023 MB)
avail memory = 1027506176 (979 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNK1> irq 3 on acpi0
pci_link1: <ACPI PCI Link LNK2> irq 5 on acpi0
pci_link2: <ACPI PCI Link LNK3> on acpi0
pci_link3: <ACPI PCI Link LNK4> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNK5> on acpi0
pci_link5: <ACPI PCI Link LUBA> irq 3 on acpi0
pci_link6: <ACPI PCI Link LUBB> irq 3 on acpi0
pci_link7: <ACPI PCI Link LMAC> irq 5 on acpi0
pci_link8: <ACPI PCI Link LAPU> on acpi0
pci_link9: <ACPI PCI Link LACI> irq 10 on acpi0
pci_link10: <ACPI PCI Link LMCI> on acpi0
pci_link11: <ACPI PCI Link LSMB> irq 5 on acpi0
pci_link12: <ACPI PCI Link LUB2> irq 3 on acpi0
pci_link13: <ACPI PCI Link LFIR> on acpi0
pci_link14: <ACPI PCI Link L3CM> on acpi0
pci_link15: <ACPI PCI Link LIDE> on acpi0
pci_link16: <ACPI PCI Link LSID> irq 11 on acpi0
pci_link17: <ACPI PCI Link LFID> irq 10 on acpi0
pci_link18: <ACPI PCI Link APC1> irq 16 on acpi0
pci_link19: <ACPI PCI Link APC2> irq 17 on acpi0
pci_link20: <ACPI PCI Link APC3> irq 18 on acpi0
pci_link21: <ACPI PCI Link APC4> irq 19 on acpi0
pci_link22: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link23: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link24: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link25: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link26: <ACPI PCI Link APCI> irq 0 on acpi0
pci_link27: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link28: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link29: <ACPI PCI Link APCS> irq 0 on acpi0
pci_link30: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link31: <ACPI PCI Link APCM> irq 0 on acpi0
pci_link32: <ACPI PCI Link AP3C> irq 0 on acpi0
pci_link33: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link34: <ACPI PCI Link APSI> irq 0 on acpi0
pci_link35: <ACPI PCI Link APSJ> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce3-250 AGP Controller> mem 0xd8000000-0xdbffffff at  
device 0.0 on pci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe0002000-0xe0002fff irq 21  
at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe0003000-0xe0003fff irq 22  
at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe0004000-0xe00040ff  
irq 23 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
nve0: <NVIDIA nForce MCP7 Networking Adapter> port 0xa400-0xa407 mem  
0xe0005000-0xe0005fff irq 21 at device 5.0 on pci0
nve0: Ethernet address 00:11:09:62:2a:15
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,  
1000baseT-FDX, auto
nve0: Ethernet address: 00:11:09:62:2a:15
nve0: [GIANT-LOCKED]
pcm0: <nVidia nForce3 250> port 0xa800-0xa8ff,0xac00-0xac7f mem  
0xe0000000-0xe0000fff irq 22 at device 6.0 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC850 AC97 Codec>
atapci0: <nVidia nForce3 Pro UDMA133 controller> port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce3 Pro SATA150 controller> port  
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f,0xcc00 
-0xcc7f irq 23 at device 9.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce3 Pro SATA150 controller> port  
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f,0xe400 
-0xe47f irq 20 at device 10.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci_link18: BIOS IRQ 22 for 0.6.INTA is invalid
pci_link21: BIOS IRQ 23 for 0.9.INTA is invalid
pci_link19: BIOS IRQ 20 for 0.10.INTA is invalid
pci2: <ACPI PCI bus> on pcib2
pci2: <simple comms> at device 7.0 (no driver attached)
bktr0: <BrookTree 878> mem 0xdf000000-0xdf000fff irq 19 at device 9.0  
on pci2
bktr0: [GIANT-LOCKED]
bktr0: AVer Media TV/FM, Philips NTSC tuner.
pci2: <multimedia> at device 9.1 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0x9400-0x947f mem  
0xde010000-0xde0107ff irq 19 at device 12.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:10:dc:00:00:75:fa:9e
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on  
acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq  
7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 720C> SCP,VLINK
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROMs> at iomem  
0xc0000-0xccfff,0xd0000-0xd3fff,0xd4000-0xd57ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
isa0
uhid0: American Power Conversion Back-UPS 500 FW: 6.4.D USB FW: c1, rev  
1.10/1.00, addr 2, iclass 3/0
ugen0: vendor 0x046d Camera, rev 2.00/1.00, addr 3
uscanner0: Canon CanoScan, rev 1.00/1.00, addr 4
Timecounter "TSC" frequency 2009792405 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 114473MB <WDC WD1200JB-00DUA3 75.13B75> at ata0-master UDMA100
ad1: 39205MB <Maxtor 6E040L0 NAR61590> at ata0-slave UDMA133
acd0: DVDROM <JLMS XJ-HD165H/CH12> at ata1-slave UDMA33
Trying to mount root from ufs:/dev/ad0s2a