any hope for maestro support?

Thu Oct 6 15:45:55 PDT 2005

Hello,

Just noticed this thread...

> > My original PR is now 1 1/2 years old (kern/63204) and still no luck of 
> > getting the maestro-2e (ES1978) to work. While you can load the sound 
> > driver and it "seems" to work the mixer has no options and you cannot get 
> > any output out of the speakers.
...
> I think it would apply cleanly to RELENG_6 too.

I'd like to help to everybody who can look at and fix it.
I'm having the same troubles with my Maestro2e on Toshiba 2595 XDVD laptop running FreeBSD 6.0 beta5 (everything works fine with WinXP).

Tried your patch for RELENG_6 with no luck... Well, it is always the same, i.e.
no sound. Here is some info about the system I'm running:
------------------------------
#uname -a
FreeBSD toshka.mshome 6.0-BETA5 FreeBSD 6.0-BETA5 #10: Wed Oct  5 22:08:18 CEST 2005     root at toshka.mshome:/usr/obj/usr/src/sys/TOSHKA  i386
#pciconf -lv
...skipped...
pcm0 at pci0:12:0: class=0x040100 card=0x00011179 chip=0x1978125d rev=0x10 hdr=0x00    vendor   = 'ESS Technology'
    device   = 'ES1978 Maestro-2E Audiodrive, ES1970 Canyon3D'
    class    = multimedia
    subclass = audio
...skipped...
#cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <ESS Technology Maestro-2E> port 0xfc00-0xfcff irq 11 at device 12.0 on pci0 (4p/1r/0v channels duplex default)
#ls -l /dev
cr--r--r--  1 root  wheel       0,   6  6 oct 23:14 sndstat
crw-rw-rw-  1 root  wheel       0,  54  6 oct 23:14 psm0
crw-rw-rw-  1 root  wheel       0,  35  6 oct 23:14 mixer0
crw-rw-rw-  1 root  wheel       0,  36  7 oct 00:02 dsp0.0
crw-rw-rw-  1 root  wheel       0,  39  6 oct 23:14 dsp0.1
crw-rw-rw-  1 root  wheel       0,  42  6 oct 23:14 dsp0.2
crw-rw-rw-  1 root  wheel       0,  45  6 oct 23:14 dsp0.3
crw-rw-rw-  1 root  wheel       0,  48  6 oct 23:14 dsp0.4
crw-rw-rw-  1 root  wheel       0,  37  6 oct 23:14 dspW0.0
crw-rw-rw-  1 root  wheel       0,  40  6 oct 23:14 dspW0.1
crw-rw-rw-  1 root  wheel       0,  43  6 oct 23:14 dspW0.2
crw-rw-rw-  1 root  wheel       0,  46  6 oct 23:14 dspW0.3
crw-rw-rw-  1 root  wheel       0,  49  6 oct 23:14 dspW0.4
crw-rw-rw-  1 root  wheel       0,  51  6 oct 23:14 dspr0.4
crw-rw-rw-  1 root  wheel       0,  38  6 oct 23:14 audio0.0
crw-rw-rw-  1 root  wheel       0,  41  6 oct 23:14 audio0.1
crw-rw-rw-  1 root  wheel       0,  44  6 oct 23:14 audio0.2
crw-rw-rw-  1 root  wheel       0,  47  6 oct 23:14 audio0.3
crw-rw-rw-  1 root  wheel       0,  50  6 oct 23:14 audio0.4
crw-rw-rw-  1 root  wheel       0,  55  6 oct 23:14 bpsm0
#tail /usr/src/sys/i386/conf/TOSHKA
...skipped...
device sound
device "snd_maestro"
#kldstat
Id Refs Address    Size     Name
 1    6 0xc0400000 3cd094   kernel
 2   16 0xc07ce000 604dc    acpi.ko
 3    1 0xc17a7000 3000     daemon_saver.ko
 4    1 0xc180f000 69000    ltmdm.ko
#dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA5 #10: Wed Oct  5 22:08:18 CEST 2005
    root at toshka.mshome:/usr/obj/usr/src/sys/TOSHKA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (399.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x66a  Stepping = 10
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 201195520 (191 MB)
avail memory = 187379712 (178 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 3 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0
cpu0: <ACPI CPU> on acpi0
...skipped...
pcm0: <ESS Technology Maestro-2E> port 0xfc00-0xfcff irq 11 at device 12.0 on pci0
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: <Asahi Kasei AK4540 AC97 Codec>
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pci0: Failed to set ACPI power state D2 on \\_SB_.PCI0.SUND: AE_BAD_PARAMETER
...skipped...
------------------------------
Please let me know if you need more logs etc.
As I understand something goes wrong with codec initialization.
The problem existed with 5.4 too...

WBR, Alex

___________________________________
NOCC, http://nocc.sourceforge.net