volume problems with snd_via8233

[Vaida Bogdan]

Any ideeas here?

[root at angelique:/tmp] # cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <VIA VT8237> at io 0xd000 irq 22 kld snd_via8233 (5p/1r/0v
channels duplex default)

[root at angelique:/tmp] # dmesg|grep pcm0
pcm0: <VIA VT8237> port 0xd000-0xd0ff irq 22 at device 17.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Unknown AC97 Codec (id = 0x434d4983)>
pcm0: detached
pcm0: <VIA VT8237> port 0xd000-0xd0ff irq 22 at device 17.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Unknown AC97 Codec (id = 0x434d4983)>

[root at angelique:/tmp] # mixer
Mixer vol      is currently set to  43:43
Mixer pcm      is currently set to 100:100
Mixer speaker  is currently set to  75:75
Mixer line     is currently set to  75:75
Mixer mic      is currently set to   0:0
Mixer cd       is currently set to  75:75
Mixer rec      is currently set to   0:0
Mixer line1    is currently set to  75:75
Recording source: mic

I guess I'll try the patches on 6.0 ... who knows...


On 5/18/05, Brent Casavant <bcasavan at angeltread.org> wrote:
> On Wed, 18 May 2005, vaida bogdan wrote:
>
> > Tried them with no luck. I don't know if I patched correctly though:
> > I first tried the via8233.c.diff patch. (I still couldn't change volume)
> > and then: ac97.c.diff     vchan.c.diff (hint from fbsd-multimedia list).
>
> OK, dumb question.
>
> Are you sure you're plugged into the appropriate output jack.
> A few months ago I had the same problems you are having, only
> to find that my headphones were in the line-out jack instead
> of the headphone jack.  :(
>
> Brent
>
> --
> Brent Casavant                  http://www.angeltread.org/
> KD5EMB                          -.- -.. ..... . -- -...
> 44 54'24"N 93 03'21"W 907FASL   EN34lv
>