somebody have a pvr250 with composite input working?

Lluis López cronopiolopez at gmail.com
Mon Apr 4 12:44:22 PDT 2005


I have (since september of 2004) a pvr250 capture card and never work
this input. Only works tuner input, but I need the composite for
record from a satelite decoder and dvdplayer. Actually put the
external signal with a modulator device, this device takes a free
channel and put composite signal over this.
My problem is that the composite input work in windows, why not on FreeBSD?

dmesg out:
cxm0: <Conexant iTVC16 MPEG Coder> mem 0xd8000000-0xdbffffff irq 18 at
device 2.0 on pci2
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
cxm0: LG Innotek TPI8PSB11D tuner
cxm0: SAA7115 rev 1 video decoder
cxm0: MSP4418G-A2 audio decoder
cxm0: IR Remote
cxm0: [GIANT-LOCKED]
cxm0: encoder firmware version 0x2040024
  
pciconf out:
cxm0 at pci2:2:0:  class=0x040000 card=0x40090070 chip=0x00164444 rev=0x01 hdr=0x00
    vendor   = 'Conexant Inc (Was: Globespan, ICompression Inc)'
    device   = 'iTVC16/CX23416 MPEG Codec'
    class    = multimedia
    subclass = video

Luis López Solé.

P.S.: If somebody wants test a cxm driver with more capabylities check this:
http://www.freebsd.org/cgi/query-pr.cgi?pr=78293

or this :
http://www.h7.dion.ne.jp/~teragen/
But this only work with:  IO-DATA GV-MVP/RX, GV-MVP/RX2 and YUAN
MPG600/GR cards, with some changes in code loads for pvr250, but don't
works :(.
Works fine for me.


More information about the freebsd-multimedia mailing list