FXTV and no Audio (again)
gabriel dandrades
normal1 at gmail.com
Thu Jul 15 18:02:08 PDT 2004
All I have that even resembles what you're referring to is a cd-in and
cd-out jumper thingie but, no cable. Also, theres no real way I can
use that cable to go into line-in on the sound card since its onboard.
Thanks for the suggestion!
On Thu, 15 Jul 2004 17:39:33 -0700 (PDT), George Leo Rachor Jr.
<george at rachors.com> wrote:
> I'm mainly a lurker here but have you tried:
>
> My Hauppage setup reqires that a jumper the audio-out connection on the
> tvcard to line-in on the sound card.
>
> A long time ago fxtv worked for me but that jumper was required. That
> short jumper cable came with my tv card....
>
> Best Regards,
>
> George Rachor
> Not a Freebsd expert!
>
> =========================================================
> George L. Rachor Jr. george at rachors.com
> Hillsboro, Oregon http://rachors.com
> United States of America Amateur Radio : KD7DCX
>
>
>
> On Thu, 15 Jul 2004, gabriel dandrades wrote:
>
> > I know this has been discussed widely on this list and many others
> > around the globe but well, I got a TV capture card a couple of days
> > ago, compiled the kernel and configured according to the FreeBSD
> > handbook TV capture card section. Upon boot up the card and drivers
> > all seem to work in harmony and all so I went ahead and installed
> > FXTV since it was the simplest application I found to test it out, I
> > really don't need great GUI so FXTV works fine, anyway I have great
> > video but absolutely NO AUDIO, here's what I've tried:
> >
> > * Tried plugging in headphones into the audio out jack in the TV card - no go
> > * Tried plugging in headphones into the audio out jack in the sound card - no go
> > * Tried setting the volumes on the "mixer" to 100:100 and also the
> > rest (i.e. line, line1 etc..) - no go
> > * Tried using fxtv with the different mixer channels and no go either
> > * Also tried using a diff sound device and well, that didn't work
> >
> > So you see guys, I've tried quite a bit, I've googled the world and
> > over and still nothing, has any one got a good solution for this
> > issue? ** ABSOLUTELY ANYTHING WILL BE APPRECIATED **
> >
> > Here is my dmesg output regarding the TV card:
> > <snip>
> > bktr0: <BrookTree 848A> mem 0xf6000000-0xf6000fff irq 10 at device 8.0 on pci2
> > iicbb0: <I2C bit-banging driver> on bti2c0
> > iicbus0: <Philips I2C bus> on iicbb0 master-only
> > iicbus1: <Philips I2C bus> on iicbb0 master-only
> > smbus0: <System Management Bus> on bti2c0
> > bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner
> > </snip>
> >
> > Here's the fxtv --debug startup output:
> > <snip>
> >
> > Fxtv v1.03
> >
> > DETECTED CAPTURE CARD(S) [DRIVER PROBES]:
> > bktr0: <BrookTree 848A> mem 0xf6000000-0xf6000fff irq 10 at device
> > 8.0 on pci2
> > iicbb0: <I2C bit-banging driver> on bti2c0
> > bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner.
> > xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem
> > 0xfbfffc00-0xfbfffc7f irq 5 at device 12.0 on pci2
> >
> > SYSCTL MIB VALUES:
> > kern.version: FreeBSD 4.10-STABLE #3: Wed Jul 14 18:40:17 PDT 2004
> > root at strange.normal1.net:/usr/obj/usr/src/sys/STRANGE
> >
> > hw.bt848.card: -1
> > hw.bt848.tuner: -1
> > hw.bt848.reverse_mute: -1
> > hw.bt848.format: -1
> > hw.bt848.slow_msp_audio: -1
> >
> > TUNER SIGNATURE (0x01 - 0xff):
> > 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00
> >
> > TUNER I2C DEVICES FOUND AT:
> > 0xc2
> >
> > CAPTURE CARD EEPROM CONTENTS:
> > Read 0 EEPROM byte
> > SUPPORTED FREQUENCY SETS:
> > 1 nabcst
> > 2 cableirc
> > 3 cablehrc
> > 4 weurope
> > 5 jpnbcst
> > 6 jpncable
> > 7 xussr
> > 8 australia
> > 9 france
> >
> > Supported RGB Capture Pixel Formats:
> > bpp Bpp RGB Masks Swap
> > --- --- ---------------------------- ----
> > 15 2 00007c00, 000003e0, 0000001f NB
> > 16 2 0000f800, 000007e0, 0000001f NB
> > 24 3 00ff0000, 0000ff00, 000000ff B
> > 24 4 00ff0000, 0000ff00, 000000ff NBWb
> >
> > Supported YUV Capture Pixel Formats:
> > YUVSize HSamp VSamp Pack CompOrder T->B L->R YTrans
> > ------- ----- ----- ------ --------- ---- ---- ------
> > 8,8,8 1,2,2 1,1,1 PLANAR YUV Y Y N
> > 8,8,8 1,2,2 1,1,1 PACKED YUYV Y Y N
> > 8,8,8 1,2,2 1,2,2 PLANAR YUV Y Y N
> > XSERVER: 'The XFree86 Project, Inc' v40300000, Protocol Verson 11.0
> > Screen Res = 1024x768, DefDepth = 24; NumScreens = 1
> > Bitmap Unit/BitOrder/Pad = 32/LSBFirst/32, Image ByteOrder = LSBFirst
> >
> > XF86DGAQueryVersion() succeeded - vers = 2.00
> > BaseAddr = 0xf4000000, Pitch = 1024, BankSize/RamSize = 16777216/16777216
> >
> > Rating Available Visuals:
> > Rating Class bpp Bpp R,G,B Masks Swap DirectVid
> > ------ ----------- --- --- ---------------------------- ---- ---------
> > 7 TrueColor 24 4,4 00ff0000, 0000ff00, 000000ff -- Yes
> > 4 TrueColor 24 4,4 00ff0000, 0000ff00, 000000ff -- No
> > 4 TrueColor 24 4,4 00ff0000, 0000ff00, 000000ff -- No
> > 4 TrueColor 24 4,4 00ff0000, 0000ff00, 000000ff -- No
> > 0 DirectColor 24 4,4 00ff0000, 0000ff00, 000000ff -- No
> > 0 DirectColor 24 4,4 00ff0000, 0000ff00, 000000ff -- No
> > 0 DirectColor 24 4,4 00ff0000, 0000ff00, 000000ff -- No
> > 0 DirectColor 24 4,4 00ff0000, 0000ff00, 000000ff -- No
> > Chosen Visual is 24-bpp TrueColor
> >
> > XF86VidModeQueryVersion() succeeded - version = 2.02
> >
> > </snip>
> >
> >
> > Cheers!!
> >
> > -gabriel
> > _______________________________________________
> > freebsd-multimedia at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
> > To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe at freebsd.org"
> >
>
>
--
-gabriel
More information about the freebsd-multimedia
mailing list