Mono Develop 5.0.1_1 Not Launching?

Russell Haley russ.haley at gmail.com
Mon Aug 10 06:37:25 UTC 2015 

Very insightful. Thank you I have something to move forward with. There
also seems to be another little clue: The "Welcome Page Updated" info
message is comming from WelcomePageNewsFeed.cs, So I need to find where
that is loaded and look for a filewatcher somewhere after that.

Thanks

Russ

On Sun, Aug 9, 2015 at 1:30 AM, Ivan Radovanovic <radovanovic at gmail.com>
wrote:

> On 08/09/15 10:17, Russell Haley napisa:
>
>> The REAL error is this:
>> [ERROR] FATAL UNHANDLED EXCEPTION: System.IO.IOException: persistent
>> kevent() error, error code = '22'
>>    at System.IO.KqueueMonitor.Monitor () [0x00000] in <filename unknown>:0
>>    at System.IO.KqueueMonitor.DoMonitor () [0x00000] in <filename
>> unknown>:0
>>
>> I'm still stuck on this. I have no idea where KqueueMonitor is being
>> called
>> from. Any input would be helpful.
>>
>> Thanks,
>>
>> Russ
>>
>> On Mon, Aug 3, 2015 at 11:41 PM, Russell Haley <russ.haley at gmail.com>
>> wrote:
>>
>> Okay, last post, I promise. I need some sleep!
>>>
>>> So what I reported previously is not a real issue
>>>
>>> ERROR [2015-08-03 22:24:30Z]: GLib-Critical: Source ID 2077 was not found
>>> when attempting to remove it
>>> Stack trace:
>>>     at GLib.Source.g_source_remove(UInt32 )
>>>     at GLib.Source.Remove(UInt32 tag)
>>>     at GLib.Timeout+TimeoutProxy.Dispose(Boolean disposing)
>>>     at GLib.Timeout+TimeoutProxy.Finalize()
>>>
>>> Is only a warning apparently??? Anyway, are we running an old version of
>>> gtk-sharp? Seems to be updated here:
>>>
>>>
>>> https://github.com/mono/gtk-sharp/commit/7ea0c4afaf405df2dfc5a42e098e9023ecc1c51c
>>>
>>> The REAL error is this:
>>> [ERROR] FATAL UNHANDLED EXCEPTION: System.IO.IOException: persistent
>>> kevent() error, error code = '22'
>>>    at System.IO.KqueueMonitor.Monitor () [0x00000] in <filename
>>> unknown>:0
>>>    at System.IO.KqueueMonitor.DoMonitor () [0x00000] in <filename
>>> unknown>:0
>>>
>>> I drilled into KqueueMonitor and found that in the Monitor() routine it
>>> throws this exception if it retries three times with no success. '22' is
>>> called fromMarshall.GetLastWin32Error, so it could be:
>>>
>>> 0x00000016 ERROR_BAD_COMMAND
>>>
>>> or
>>>
>>> 0x00000022 ERROR_WRONG_DISK
>>>
>>> Depending how you interpret '22'. :D
>>>
>>>
>>> Once again, hope I'm helping more than hindering.
>>>
>>> Goodnight,
>>>
>>> Russ
>>>
>>> On Mon, Aug 3, 2015 at 10:30 PM, Russell Haley <russ.haley at gmail.com>
>>> wrote:
>>>
>>> Ha! So I worked through it and I installed the following ports:
>>>>
>>>> p5-XML-LibXML:
>>>> cd /usr/ports/textproc/p5-XML-LibXML/ && make install clean
>>>>
>>>> gtk-sharp20 -> gtk-sharp30 doesn't work! oops
>>>> /ports/x11-toolkits/gtk-sharp20/ && make install clean
>>>>
>>>> gnome-sharp20
>>>> cd /usr/ports/x11-toolkits/gnome-sharp20/ && make install clean  -> had
>>>> to run REinstall for this one???
>>>>
>>>> and finished the build, but I get a runtime error. When running
>>>> monodevelop --no-redirect I get this:
>>>>
>>>> INFO [2015-08-03 22:24:26Z]: Add-in loaded: MonoDevelop.CBinding
>>>> INFO [2015-08-03 22:24:26Z]:
>>>> [MonoDevelop.DesignerSupport.Toolbox.ExternalLoader] Add-in loaded:
>>>> MonoDevelop.CBinding
>>>> INFO [2015-08-03 22:24:26Z]: Add-in loaded: MonoDevelop.GtkCore
>>>> INFO [2015-08-03 22:24:26Z]:
>>>> [MonoDevelop.DesignerSupport.Toolbox.ExternalLoader] Add-in loaded:
>>>> MonoDevelop.GtkCore
>>>> ERROR [2015-08-03 22:24:26Z]: GLib-Critical: Source ID 1927 was not
>>>> found
>>>> when attempting to remove it
>>>> Stack trace:
>>>>     at GLib.Source.g_source_remove(UInt32 )
>>>>     at GLib.Source.Remove(UInt32 tag)
>>>>     at GLib.Timeout+TimeoutProxy.Dispose(Boolean disposing)
>>>>     at GLib.Timeout+TimeoutProxy.Finalize()
>>>> ERROR [2015-08-03 22:24:26Z]: GLib-Critical: Source ID 1924 was not
>>>> found
>>>> when attempting to remove it
>>>> Stack trace:
>>>>     at GLib.Source.g_source_remove(UInt32 )
>>>>     at GLib.Source.Remove(UInt32 tag)
>>>>     at GLib.Timeout+TimeoutProxy.Dispose(Boolean disposing)
>>>>     at GLib.Timeout+TimeoutProxy.Finalize()
>>>> ERROR [2015-08-03 22:24:26Z]: GLib-Critical: Source ID 1923 was not
>>>> found
>>>> when attempting to remove it
>>>>
>>>> Ad-nausium. NOW I am out of my depth...
>>>>
>>>>
>>>> Yay, I'm helping! :D
>>>>
>>>> Russ
>>>>
>>>>
>>>> On Mon, Aug 3, 2015 at 9:35 PM, Russell Haley <russ.haley at gmail.com>
>>>> wrote:
>>>>
>>>> Okay, so this is where I am at:
>>>>>
>>>>> 1) built mono from /usr/ports/lang/mono (version 4.0.1.28)
>>>>> 2) downloaded current Monodevelop from github.
>>>>> 3) Tried to build, but ran into the following issues:
>>>>> a) *%-recursive: $(CONFIG_MAKE)* -> Doesn't work with make. I called
>>>>> gmake and got past this.
>>>>> b) *DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"* -> This
>>>>> fails in tcsh. Not sure what the repalcement is. Hard coded path got me
>>>>> past this.
>>>>> c) Monodevelop/main contains a (generated?) Makefile has a target
>>>>> called
>>>>> restore-packages which has the following line: *nuget restore* (or
>>>>> something like that) It fails for two reasons.
>>>>> i) it needs to be replaces with *mono
>>>>> /usr/home/rhaley/git/monodevelop/main/external/nuget-binary/NuGet.exe
>>>>> restore*
>>>>> ii) *mozroots --import --sync* -> NuGet.exe needs this run or download
>>>>> fail with WARNING: Error: SendFailure (Error writing headers). Not sure
>>>>> what it does
>>>>>
>>>>> Now I am getting build errors and i think it is because I don't have
>>>>> mono-addins (gtk failing).
>>>>>
>>>>> When I try to run mono-addins from /usr/ports/devel/mono-addins, I get
>>>>> the following error:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> *make install clean===>  Installing for mono-addins-1.1===>
>>>>> mono-addins-1.1 depends on executable: mono - found===>
>>>>>  mono-addins-1.1
>>>>> depends on file: /usr/local/libdata/pkgconfig/gtk-sharp-2.0.pc - not
>>>>> found===>   mono-addins-1.1 depends on file:
>>>>> /usr/local/libdata/pkgconfig/gtk-sharp-2.0.pc - not found*** Error code
>>>>> 1Stop.make[1]: stopped in /usr/ports/devel/mono-addins*** Error code
>>>>> 1Stop.make: stopped in /usr/ports/devel/mono-addins*
>>>>>
>>>>>
>>>>> Few! okay, that's as far as I got. Why is the mono-addins port not
>>>>> fetching dependencies?
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Russ
>>>>>
>>>>> On Mon, Aug 3, 2015 at 6:45 PM, Russell Haley <russ.haley at gmail.com>
>>>>> wrote:
>>>>>
>>>>> Very exciting. I would like to be involved if you need a tester. I
>>>>>> just read about creating ports in BSD Journal and I started looking
>>>>>> into why make was failing on the source from the github repository
>>>>>> (some bash specific stuff, NuGet gets called incorrectly and fails
>>>>>> etc) but that's as far as I got.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Russell
>>>>>>
>>>>>> On Mon, Aug 3, 2015 at 4:11 PM, Tony Narlock <tony at git-pull.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Thank you for posting this. I also am getting the same experience as
>>>>>>>
>>>>>> you and
>>>>>>
>>>>>>> others on the thread.
>>>>>>>
>>>>>>> I made a bugzilla issue at
>>>>>>> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=202067 and linked
>>>>>>>
>>>>>> to the
>>>>>>
>>>>>>> thread here as well.
>>>>>>>
>>>>>>> Also, there is a patch to update monodevelop (to 5.5) at
>>>>>>> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=194915. This was
>>>>>>>
>>>>>> last
>>>>>>
>>>>>>> modified 2014-12-19 12:38 PST. Unfortunately no one caught it.
>>>>>>>
>>>>>> Sergey, I am
>>>>>>
>>>>>>> CC'ing you on this.
>>>>>>>
>>>>>>> It being almost 9 months since, I think we may as well make a patch
>>>>>>>
>>>>>> for the
>>>>>>
>>>>>>> newest monodevelop if possible (latest release as of August 3rd, 2015
>>>>>>>
>>>>>> is
>>>>>>
>>>>>>> 5.9.5.5)
>>>>>>>
>>>>>>> On Wed, Jul 29, 2015 at 1:16 AM, Russell Haley <russ.haley at gmail.com
>>>>>>> >
>>>>>>>
>>>>>> wrote:
>>>>>>
>>>>>>>
>>>>>>>> Hi there,
>>>>>>>>
>>>>>>>> I am trying to run Monodevelop on PC-BSD 10.1 release 25. First,
>>>>>>>>
>>>>>>> ports
>>>>>>
>>>>>>> wouldn't build any of the dependency files and then when I finally
>>>>>>>>
>>>>>>> got
>>>>>>
>>>>>>> it installed through the AppCafe using a binary, the application
>>>>>>>>
>>>>>>> fails
>>>>>>
>>>>>>> to start. There is no error or pop-up. It just fails to start.
>>>>>>>>
>>>>>>>> I'd really like to debug this and fix the issue. Is there any
>>>>>>>> logging
>>>>>>>> or any way I can figure out what the next step in debuggin this
>>>>>>>> issue
>>>>>>>> is?
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>> Russ
>>>>>>>> _______________________________________________
>>>>>>>> freebsd-mono at freebsd.org mailing list
>>>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-mono
>>>>>>>> To unsubscribe, send any mail to "
>>>>>>>>
>>>>>>> freebsd-mono-unsubscribe at freebsd.org"
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>> _______________________________________________
>> freebsd-mono at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-mono
>> To unsubscribe, send any mail to "freebsd-mono-unsubscribe at freebsd.org"
>>
>>
> Hi Russ,
>
> KqueueMonitor is class used to implement FileSystemWatcher using kqueue,
> so you should really look for calls of FileSystemWatcher methods.
>
>
> (KqueueMonitor was relatively broken in 3.x but I patched it for FreeBSD,
> unfortunately I didn't have time to look at 4.x yet, so I don't have any
> clue if my code is still there - it was kinda suboptimal but it was working
> properly).
>
> Kind regards,
> Ivan
>

More information about the freebsd-mono mailing list