Fwd: svn commit: r270516 - head/sys/dev/drm2/i915

Adrian Chadd adrian at freebsd.org
Mon Aug 25 05:39:41 UTC 2014


This fixes the brightness on a Lenovo X230. The buttons don't yet work
- they end up setting the value +1 or -1 from the current setting, but
no further.

But, I can at least now control the brightness on this damned thing!


-a


---------- Forwarded message ----------
From: Adrian Chadd <adrian at freebsd.org>
Date: 24 August 2014 22:03
Subject: svn commit: r270516 - head/sys/dev/drm2/i915
To: src-committers at freebsd.org, svn-src-all at freebsd.org,
svn-src-head at freebsd.org


Author: adrian
Date: Mon Aug 25 05:03:10 2014
New Revision: 270516
URL: http://svnweb.freebsd.org/changeset/base/270516

Log:
  i915 driver - enable opregion handle; program CADL.

  add opregion handling for drm2 - which exposes some ACPI video configuration
  pieces that some Lenovo laptop models use to flesh out which video device
  to speak to.  This enables the brightness control in ACPI to work
these models.

  The CADL bits are also important - it's used to figure out which ACPI
  events to hook the brightness buttons into.  It doesn't yet seem to work
  for me, but it does for the OP.

  Tested:

  * Lenovo X230 (mine)
  * OP: ASUS UX51VZ

  PR:   190186
  Submitted by: Henry Hu <henry.hu.sh at gmail.com>
  Reviewed by:  dumbbell

Modified:
  head/sys/dev/drm2/i915/i915_drv.h
  head/sys/dev/drm2/i915/i915_irq.c
  head/sys/dev/drm2/i915/intel_opregion.c

Modified: head/sys/dev/drm2/i915/i915_drv.h
==============================================================================
--- head/sys/dev/drm2/i915/i915_drv.h   Mon Aug 25 03:02:38 2014
 (r270515)
+++ head/sys/dev/drm2/i915/i915_drv.h   Mon Aug 25 05:03:10 2014
 (r270516)
@@ -1242,10 +1242,11 @@ extern void intel_iic_reset(struct drm_d

 /* intel_opregion.c */
 int intel_opregion_setup(struct drm_device *dev);
-extern int intel_opregion_init(struct drm_device *dev);
+extern void intel_opregion_init(struct drm_device *dev);
 extern void intel_opregion_fini(struct drm_device *dev);
-extern void opregion_asle_intr(struct drm_device *dev);
-extern void opregion_enable_asle(struct drm_device *dev);
+extern void intel_opregion_asle_intr(struct drm_device *dev);
+extern void intel_opregion_gse_intr(struct drm_device *dev);
+extern void intel_opregion_enable_asle(struct drm_device *dev);

 /* i915_gem_gtt.c */
 int i915_gem_init_aliasing_ppgtt(struct drm_device *dev);

Modified: head/sys/dev/drm2/i915/i915_irq.c
==============================================================================
--- head/sys/dev/drm2/i915/i915_irq.c   Mon Aug 25 03:02:38 2014
 (r270515)
+++ head/sys/dev/drm2/i915/i915_irq.c   Mon Aug 25 05:03:10 2014
 (r270516)
@@ -537,11 +537,7 @@ ivybridge_irq_handler(void *arg)
                notify_ring(dev, &dev_priv->rings[BCS]);

        if (de_iir & DE_GSE_IVB) {
-#if 1
-               KIB_NOTYET();
-#else
                intel_opregion_gse_intr(dev);
-#endif
        }

        if (de_iir & DE_PLANEA_FLIP_DONE_IVB) {
@@ -649,11 +645,7 @@ ironlake_irq_handler(void *arg)
                notify_ring(dev, &dev_priv->rings[BCS]);

        if (de_iir & DE_GSE) {
-#if 1
-               KIB_NOTYET();
-#else
                intel_opregion_gse_intr(dev);
-#endif
        }

        if (de_iir & DE_PLANEA_FLIP_DONE) {
@@ -1055,11 +1047,7 @@ i915_driver_irq_handler(void *arg)


                if (blc_event || (iir & I915_ASLE_INTERRUPT)) {
-#if 1
-                       KIB_NOTYET();
-#else
                        intel_opregion_asle_intr(dev);
-#endif
                }

                /* With MSI, interrupts are only generated when iir
@@ -1781,11 +1769,7 @@ i915_driver_irq_postinstall(struct drm_d
                I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
        }

-#if 1
-       KIB_NOTYET();
-#else
        intel_opregion_enable_asle(dev);
-#endif

        return 0;
 }

Modified: head/sys/dev/drm2/i915/intel_opregion.c
==============================================================================
--- head/sys/dev/drm2/i915/intel_opregion.c     Mon Aug 25 03:02:38
2014        (r270515)
+++ head/sys/dev/drm2/i915/intel_opregion.c     Mon Aug 25 05:03:10
2014        (r270516)
@@ -32,6 +32,9 @@ __FBSDID("$FreeBSD$");
 #include <dev/drm2/i915/i915_drm.h>
 #include <dev/drm2/i915/i915_drv.h>
 #include <dev/drm2/i915/intel_drv.h>
+#include <contrib/dev/acpica/include/acpi.h>
+#include <contrib/dev/acpica/include/accommon.h>
+#include <dev/acpica/acpivar.h>

 #define PCI_ASLE 0xe4
 #define PCI_ASLS 0xfc
@@ -144,7 +147,7 @@ struct opregion_asle {
 #define ACPI_DIGITAL_OUTPUT (3<<8)
 #define ACPI_LVDS_OUTPUT (4<<8)

-#ifdef CONFIG_ACPI
+#if 1
 static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
 {
        struct drm_i915_private *dev_priv = dev->dev_private;
@@ -289,6 +292,7 @@ void intel_opregion_enable_asle(struct d

 static struct intel_opregion *system_opregion;

+#if 0
 static int intel_opregion_video_event(struct notifier_block *nb,
                                      unsigned long val, void *data)
 {
@@ -319,6 +323,7 @@ static int intel_opregion_video_event(st
 static struct notifier_block intel_opregion_notifier = {
        .notifier_call = intel_opregion_video_event,
 };
+#endif

 /*
  * Initialise the DIDL field in opregion. This passes a list of devices to
@@ -326,37 +331,72 @@ static struct notifier_block intel_opreg
  * (version 3)
  */

+static int acpi_is_video_device(ACPI_HANDLE devh) {
+       ACPI_HANDLE h;
+       if (ACPI_FAILURE(AcpiGetHandle(devh, "_DOD", &h)) ||
+               ACPI_FAILURE(AcpiGetHandle(devh, "_DOS", &h))) {
+               return 0;
+       }
+       return 1;
+}
+
 static void intel_didl_outputs(struct drm_device *dev)
 {
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_opregion *opregion = &dev_priv->opregion;
        struct drm_connector *connector;
-       acpi_handle handle;
-       struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL;
-       unsigned long long device_id;
-       acpi_status status;
+       u32 device_id;
+       ACPI_HANDLE handle, acpi_video_bus, acpi_cdev;
+       ACPI_STATUS status;
        int i = 0;

-       handle = DEVICE_ACPI_HANDLE(&dev->pdev->dev);
-       if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev)))
+       handle = acpi_get_handle(dev->device);
+       if (!handle)
                return;

-       if (acpi_is_video_device(acpi_dev))
-               acpi_video_bus = acpi_dev;
+       if (acpi_is_video_device(handle))
+               acpi_video_bus = handle;
        else {
+               acpi_cdev = NULL;
+               acpi_video_bus = NULL;
+               while (AcpiGetNextObject(ACPI_TYPE_DEVICE, handle, acpi_cdev,
+                                       &acpi_cdev) != AE_NOT_FOUND) {
+                       if (acpi_is_video_device(acpi_cdev)) {
+                               acpi_video_bus = acpi_cdev;
+                               break;
+                       }
+               }
+#if 0
                list_for_each_entry(acpi_cdev, &acpi_dev->children, node) {
                        if (acpi_is_video_device(acpi_cdev)) {
                                acpi_video_bus = acpi_cdev;
                                break;
                        }
                }
+#endif
        }

        if (!acpi_video_bus) {
-               printk(KERN_WARNING "No ACPI video bus found\n");
+               device_printf(dev->device, "No ACPI video bus found\n");
                return;
        }

+       acpi_cdev = NULL;
+       while (AcpiGetNextObject(ACPI_TYPE_DEVICE, acpi_video_bus, acpi_cdev,
+                               &acpi_cdev) != AE_NOT_FOUND) {
+               if (i >= 8) {
+                       device_printf(dev->device, "More than 8
outputs detected\n");
+                       return;
+               }
+               status = acpi_GetInteger(acpi_cdev, "_ADR", &device_id);
+               if (ACPI_SUCCESS(status)) {
+                       if (!device_id)
+                               goto blind_set;
+                       opregion->acpi->didl[i] = (u32)(device_id & 0x0f0f);
+                       i++;
+               }
+       }
+#if 0
        list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
                if (i >= 8) {
                        dev_printk(KERN_ERR, &dev->pdev->dev,
@@ -373,6 +413,7 @@ static void intel_didl_outputs(struct dr
                        i++;
                }
        }
+#endif

 end:
        /* If fewer than 8 outputs, the list must be null terminated */
@@ -417,6 +458,25 @@ blind_set:
        goto end;
 }

+static void intel_setup_cadls(struct drm_device *dev)
+{
+       struct drm_i915_private *dev_priv = dev->dev_private;
+       struct intel_opregion *opregion = &dev_priv->opregion;
+       int i = 0;
+       u32 disp_id;
+
+       /* Initialize the CADL field by duplicating the DIDL values.
+        * Technically, this is not always correct as display outputs may exist,
+        * but not active. This initialization is necessary for some Clevo
+        * laptops that check this field before processing the brightness and
+        * display switching hotkeys. Just like DIDL, CADL is NULL-terminated if
+        * there are less than eight devices. */
+       do {
+               disp_id = opregion->acpi->didl[i];
+               opregion->acpi->cadl[i] = disp_id;
+       } while (++i < 8 && disp_id != 0);
+}
+
 void intel_opregion_init(struct drm_device *dev)
 {
        struct drm_i915_private *dev_priv = dev->dev_private;
@@ -426,8 +486,10 @@ void intel_opregion_init(struct drm_devi
                return;

        if (opregion->acpi) {
-               if (drm_core_check_feature(dev, DRIVER_MODESET))
+               if (drm_core_check_feature(dev, DRIVER_MODESET)) {
                        intel_didl_outputs(dev);
+                       intel_setup_cadls(dev);
+               }

                /* Notify BIOS we are ready to handle ACPI video ext notifs.
                 * Right now, all the events are handled by the ACPI
video module.
@@ -436,7 +498,9 @@ void intel_opregion_init(struct drm_devi
                opregion->acpi->drdy = 1;

                system_opregion = opregion;
+#if 0
                register_acpi_notifier(&intel_opregion_notifier);
+#endif
        }

        if (opregion->asle)
@@ -455,11 +519,13 @@ void intel_opregion_fini(struct drm_devi
                opregion->acpi->drdy = 0;

                system_opregion = NULL;
+#if 0
                unregister_acpi_notifier(&intel_opregion_notifier);
+#endif
        }

        /* just clear all opregion memory pointers now */
-       iounmap(opregion->header);
+       pmap_unmapdev((vm_offset_t)opregion->header, OPREGION_SIZE);
        opregion->header = NULL;
        opregion->acpi = NULL;
        opregion->swsci = NULL;


More information about the freebsd-mobile mailing list