Inetl ProWireless 2200 iwi driver problem

[James Feeder]

Hello,

I have recently bought a Inspiron 6000 laptop with an
Intel ProWireless 2200. Everything seems to running
fine but I am unable to access the internet via the
wireless card. It can ping the router and other
computers on the network but fails to ping anything
outside the router. I have set the defaultrouter in
rc.conf and the wireless card seems to be configured
correctly when I run ifconfig. Here is some output
from my laptop which will hopefully be of some use:

# ping -c5 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0 ttl=254
time=4.132 ms
64 bytes from 192.168.1.1: icmp_seq=1 ttl=254
time=3.603 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=254
time=3.874 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=254
time=3.985 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=254
time=3.814 ms

--- 192.168.1.1 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet
loss
round-trip min/avg/max/stddev =
3.603/3.882/4.132/0.176 ms

# ping -c5 www.google.com
PING www.l.google.com (66.249.87.99): 56 data bytes
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host

--- www.l.google.com ping statistics ---
5 packets transmitted, 0 packets received, 100% packet
loss

# ifconfig
bfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        ether aa:aa:aa:aa:aa:aa
        media: Ethernet autoselect (none)
        status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
16384
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
iwi0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
        inet 192.168.1.100 netmask 0xffffff00
broadcast 192.168.1.255
        inet6 fe80::xxx:xxxx:xxxx:xxxx%iwi0 prefixlen
64 scopeid 0x3
        ether bb:bb:bb:bb:bb:bb
        media: IEEE 802.11 Wireless Ethernet
autoselect (DS/5.5Mbps)
        status: associated
        ssid baz 1:baz
        channel 11 authmode OPEN powersavemode OFF
powersavesleep 100
        rtsthreshold 2312 protmode CTS txpower 100
        wepmode OFF weptxkey 1

# netstat -rn
Routing tables

Internet:
Destination        Gateway            Flags    Refs   
  Use  Netif Expire
127.0.0.1          127.0.0.1          UH          0   
    0    lo0
192.168.1          link#3             UC          0   
    0   iwi0
192.168.1.1        00:06:25:1a:c9:4e  UHLW        0   
   28   iwi0   1027
192.168.1.100      bb:bb:bb:bb:bb:bb  UHLW        0   
    2    lo0

Internet6:
Destination                       Gateway             
         Flags      Netif
 Expire
::1                               ::1                 
         UH          lo0
fe80::%lo0/64                     fe80::1%lo0         
         U           lo0
fe80::1%lo0                       link#2              
         UHL         lo0
fe80::%iwi0/64                    link#3              
         UC         iwi0
fe80::xxx:xxxx:xxxx:xxxx%iwi0     bb:bb:bb:bb:bb:bb   
         UHL         lo0
ff01::/32                         ::1                 
         U           lo0
ff02::%lo0/32                     ::1                 
         UC          lo0
ff02::%iwi0/32                    link#3              
         UC         iwi0

Spacings may be a bit strange above, if you would like
it as an attachment just ask :)

Thanks,

James Feeder


		
___________________________________________________________ 
How much free photo storage do you get? Store your holiday 
snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com