Troubles with Compaq Armada E500

d.wylie at hccnet.nl d.wylie at hccnet.nl
Thu Sep 23 06:18:47 PDT 2004


Hi.
I had some troubles on an E500 which were solved after a bios update.
That was CURRENT of some time back though. Don't know about 5.3.

grtz,
Dylan


> Hello!
> 
> I'm trying to set up 5.3BETA5 on Compaq Armada E500, and I've run into
> the trouble: I cannot attach fxp0; it is on miniPCI, and OS can see it
> but cannot allocate interrupt.
> 
> maybe someone can help?
> 
> Here is my dmesg output:
> 
> Rebooting...
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 5.3-BETA5 #0: Sun Sep 19 02:35:12 UTC 2004
>     root at wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a0c000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a0c1cc.
> Calibrating clock(s) ... i8254 clock: 1193259 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 995675479 Hz
> CPU: Intel Pentium III (995.68-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
>   Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory  = 268369920 (255 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000000c29000 - 0x000000000fb3ffff, 250703872 bytes (61207 pages)
> avail memory = 252964864 (241 MB)
> bios32: Found BIOS32 Service Directory header at 0xc00fa000
> bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0x478
> pnpbios: Found PnP BIOS data at 0xc00fbe10
> pnpbios: Entry = f0000:be3e  Rev = 1.0
> pnpbios: Event flag at fbe36
> pnpbios: OEM ID 51b1110e
> Other BIOS signatures found:
> wlan: <802.11 Link Layer>
> random: <entropy source, Software, Yarrow>
> io: <I/O>
> mem: <memory>
> Pentium Pro MTRR support enabled
> null: <null device, zero device>
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <COMPAQ RSDTBL> on motherboard
> acpi0: [MPSAFE]
> pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
> pci_open(1a):	mode1res=0x80000000 (0x80000000)
> pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
> pcibios: BIOS version 2.10
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 0 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 4 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 4 func 1
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 7 func 0
> acpi0: Power Button (fixed)
> atpic: Programming IRQ9 as level/low
> ACPI timer looks BAD  min = 2, max = 7, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 4
> ACPI timer looks BAD  min = 2, max = 6, width = 4
> ACPI timer looks BAD  min = 2, max = 7, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 4
> ACPI timer looks BAD  min = 2, max = 7, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 4
> ACPI timer looks BAD  min = 2, max = 7, width = 5
> ACPI timer looks BAD  min = 2, max = 6, width = 4
> ACPI timer looks BAD  min = 2, max = 6, width = 4
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
> cpu0: <ACPI CPU (2 Cx states)> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> acpi link get: empty IRQ resource
> ACPI PCI link initial configuration:
> \\_SB_.C142 irq  0: [11] 11+ low,level,sharable 0.1.0
> \\_SB_.C142 irq  0: [11] 11+ low,level,sharable 0.4.0
> \\_SB_.C142 irq  0: [11] 11+ low,level,sharable 0.4.1
> \\_SB_.C14A irq  0: [11] 11+ low,level,sharable 0.7.3
> \\_SB_.C149 irq  0: [11] 11+ low,level,sharable 0.8.0
> \\_SB_.C149 irq  0: [11] 11+ low,level,sharable 0.9.0
> \\_SB_.C14A irq  0: [11] 11+ low,level,sharable 0.9.1
> \\_SB_.C142 irq  0: [11] 11+ low,level,sharable 0.16.0
> \\_SB_.C148 irq  0: [11]  0+ low,level,sharable 0.16.1
> \\_SB_.C149 irq  0: [11] 11+ low,level,sharable 0.16.2
> \\_SB_.C14A irq  0: [11] 11+ low,level,sharable 0.16.3
> pci0: <ACPI PCI bus> on pcib0
> pci0: physical bus=0
> 	map[10]: type 3, range 32, base 50000000, size 26, enabled
> found->	vendor=0x8086, dev=0x7190, revid=0x03
> 	bus=0, slot=0, func=0
> 	class=06-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0006, statreg=0xa210, cachelnsz=0 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x8086, dev=0x7191, revid=0x03
> 	bus=0, slot=1, func=0
> 	class=06-04-00, hdrtype=0x01, mfdev=0
> 	cmdreg=0x0003, statreg=0x0220, cachelnsz=0 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
> 	map[10]: type 1, range 32, base 41100000, size 12, enabled
> pcib0: matched entry for 0.4.INTA (src \\_SB_.C142)
> pcib0: possible interrupts: 11
> ACPI PCI link arbitrated settings:
> \\_SB_.C142 (references 4, priority 440):
> 	interrupts:	    11
> 	penalty:	   110
> \\_SB_.C14A (references 3, priority 330):
> 	interrupts:	    11
> 	penalty:	   110
> \\_SB_.C149 (references 3, priority 330):
> 	interrupts:	    11
> 	penalty:	   110
> \\_SB_.C148 (references 1, priority 110):
> 	interrupts:	    11
> 	penalty:	   110
> pcib0: slot 4 INTA routed to irq 11 via \\_SB_.C142
> found->	vendor=0x104c, dev=0xac1c, revid=0x01
> 	bus=0, slot=4, func=0
> 	class=06-07-00, hdrtype=0x02, mfdev=1
> 	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
> 	lattimer=0x42 (1980 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns)
> 	intpin=a, irq=11
> 	powerspec 1  supports D0 D1 D2 D3  current D0
> 	map[10]: type 1, range 32, base 41180000, size 12, enabled
> pcib0: matched entry for 0.4.INTA (src \\_SB_.C142)
> pcib0: slot 4 INTA is already routed to irq 11
> found->	vendor=0x104c, dev=0xac1c, revid=0x01
> 	bus=0, slot=4, func=1
> 	class=06-07-00, hdrtype=0x02, mfdev=1
> 	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
> 	lattimer=0x42 (1980 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns)
> 	intpin=a, irq=11
> 	powerspec 1  supports D0 D1 D2 D3  current D0
> found->	vendor=0x8086, dev=0x7110, revid=0x02
> 	bus=0, slot=7, func=0
> 	class=06-80-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	map[20]: type 4, range 32, base 00004010, size  4, enabled
> found->	vendor=0x8086, dev=0x7111, revid=0x01
> 	bus=0, slot=7, func=1
> 	class=01-01-80, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	map[20]: type 4, range 32, base 00004020, size  5, enabled
> pcib0: matched entry for 0.7.INTD (src \\_SB_.C14A)
> pcib0: possible interrupts: 11
> ACPI PCI link arbitrated settings:
> \\_SB_.C14A (references 3, priority 780):
> 	interrupts:	    11
> 	penalty:	   260
> \\_SB_.C149 (references 3, priority 780):
> 	interrupts:	    11
> 	penalty:	   260
> \\_SB_.C148 (references 1, priority 260):
> 	interrupts:	    11
> 	penalty:	   260
> pcib0: slot 7 INTD routed to irq 11 via \\_SB_.C14A
> found->	vendor=0x8086, dev=0x7112, revid=0x01
> 	bus=0, slot=7, func=2
> 	class=0c-03-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=d, irq=11
> 	map[90]: type 4, range 32, base 00004000, size  4, enabled
> found->	vendor=0x8086, dev=0x7113, revid=0x03
> 	bus=0, slot=7, func=3
> 	class=06-80-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	map[10]: type 4, range 32, base 00004400, size  8, enabled
> pcib0: matched entry for 0.8.INTA (src \\_SB_.C149)
> pcib0: possible interrupts: 11
> ACPI PCI link arbitrated settings:
> \\_SB_.C149 (references 3, priority 1200):
> 	interrupts:	    11
> 	penalty:	   400
> \\_SB_.C148 (references 1, priority 400):
> 	interrupts:	    11
> 	penalty:	   400
> pcib0: slot 8 INTA routed to irq 11 via \\_SB_.C149
> found->	vendor=0x125d, dev=0x1978, revid=0x10
> 	bus=0, slot=8, func=0
> 	class=04-01-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
> 	intpin=a, irq=11
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> found->	vendor=0x8086, dev=0x1229, revid=0xff
> 	bus=0, slot=9, func=0
> 	class=02-ff-ff, hdrtype=0x7f, mfdev=1
> 	cmdreg=0x0000, statreg=0x8290, cachelnsz=255 (dwords)
> 	lattimer=0xff (7650 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns)
> 	intpin=_, irq=255
> found->	vendor=0x8086, dev=0x124b, revid=0x01
> 	bus=0, slot=12, func=0
> 	class=06-04-80, hdrtype=0x01, mfdev=0
> 	cmdreg=0x0087, statreg=0x0400, cachelnsz=8 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
> agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x50000000-
> 0x53ffffff at device 0.0 on pci0
> agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x50000000
> agp0: allocating GATT for aperture of size 64M
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pcib1:   secondary bus     1
> pcib1:   subordinate bus   1
> pcib1:   I/O decode        0x3000-0x3fff
> pcib1:   memory decode     0x40000000-0x410fffff
> pcib1:   prefetched decode 0xfff00000-0xfffff
> pcib1: could not get PCI interrupt routing table for \\_SB_.C005.C012 -
> AE_NOT_FOUND
> pci1: <ACPI PCI bus> on pcib1
> pci1: physical bus=1
> 	map[10]: type 1, range 32, base 40000000, size 24, enabled
> pcib1: device (null) requested decoded memory range 0x40000000-
> 0x40ffffff
> 	map[14]: type 4, range 32, base 00003000, size  8, enabled
> pcib1: device (null) requested decoded I/O range 0x3000-0x30ff
> 	map[18]: type 1, range 32, base 41000000, size 12, enabled
> pcib1: device (null) requested decoded memory range 0x41000000-
> 0x41000fff
> pcib0: matched entry for 0.1.INTA (src \\_SB_.C142)
> pcib0: slot 1 INTA is already routed to irq 11
> pcib1: slot 0 INTA is routed to irq 11
> found->	vendor=0x1002, dev=0x4c4d, revid=0x64
> 	bus=1, slot=0, func=0
> 	class=03-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
> 	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
> 	intpin=a, irq=11
> 	powerspec 1  supports D0 D1 D2 D3  current D0
> pci1: <display, VGA> at device 0.0 (no driver attached)
> cbb0: <TI1225 PCI-CardBus Bridge> mem 0x41100000-0x41100fff irq 11 at
> device 4.0 on pci0
> cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41100000
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb0: [MPSAFE]
> cbb0: PCI Configuration space:
>   0x00: 0xac1c104c 0x02100007 0x06070001 0x00824208
>   0x10: 0x41100000 0x020000a0 0x20020200 0xfffff000
>   0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
>   0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010b
>   0x40: 0xb1210e11 0x00000001 0x00000000 0x00000000
>   0x50: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x60: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x70: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x80: 0x28049060 0x00000000 0x00000000 0x01001c72
>   0x90: 0x60642280 0x00000000 0x00000000 0x00000000
>   0xa0: 0x7e210001 0x00800000 0x00000801 0x0000001f
>   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> cbb1: <TI1225 PCI-CardBus Bridge> mem 0x41180000-0x41180fff irq 11 at
> device 4.1 on pci0
> cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41180000
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> cbb1: [MPSAFE]
> cbb1: PCI Configuration space:
>   0x00: 0xac1c104c 0x02100007 0x06070001 0x00824208
>   0x10: 0x41180000 0x020000a0 0x20030300 0xfffff000
>   0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
>   0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010b
>   0x40: 0xb1210e11 0x00000001 0x00000000 0x00000000
>   0x50: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x60: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x70: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x80: 0x28449060 0x00000000 0x00000000 0x01001c72
>   0x90: 0x60642280 0x00000000 0x00000000 0x00000000
>   0xa0: 0x7e210001 0x00800000 0x00000801 0x0000001f
>   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> PCI-ISA bridge with incorrect subclass 0x80
> PCI-ISA bridge with incorrect subclass 0x80
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 UDMA33 controller> port 0x4010-0x401f,0x376,0x170-
> 0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4010
> ata0: channel #0 on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=50
> ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
> ata0: [MPSAFE]
> ata1: channel #1 on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
> ata1: [MPSAFE]
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4020-0x403f irq
> 11 at device 7.2 on pci0
> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1: Atmel UHB124 hub, class 9/0, rev 1.00/1.00, addr 2
> uhub1: 4 ports with 4 removable, self powered
> umass0: AOPEN Aopen USB2.0 Device, rev 2.00/0.01, addr 3
> umass0: Get Max Lun not supported (STALLED)
> umass0:0:0:-1: Attached to scbus0
> umass1: USB Flash Disk, rev 2.00/2.00, addr 4
> umass1:1:1:-1: Attached to scbus1
> pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
> pci0: <multimedia, audio> at device 8.0 (no driver attached)
> fxp0: <Intel 82557/8/9 Pro/100 Ethernet> at device 9.0 on pci0
> fxp0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
> fxp0: using memory space register mapping
> pcib0: no PRT entry for 0.9.INT?
> fxp0: could not map interrupt
> device_attach: fxp0 attach returned 6
> pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0
> pcib2:   secondary bus     4
> pcib2:   subordinate bus   4
> pcib2:   I/O decode        0x0-0xfff
> pcib2:   memory decode     0x0-0xfffff
> pcib2:   prefetched decode 0xfff00000-0xfffff
> pcib2:   Subtractively decoded bridge.
> ACPI PCI link initial configuration:
> \\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.7.0
> \\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.8.0
> \\_SB_.C148 irq  0: [11]  0+ low,level,sharable 4.8.1
> \\_SB_.C149 irq*11: [11] 11+ low,level,sharable 4.8.2
> \\_SB_.C14A irq*11: [11] 11+ low,level,sharable 4.8.3
> \\_SB_.C148 irq  0: [11]  0+ low,level,sharable 4.9.0
> \\_SB_.C149 irq*11: [11] 11+ low,level,sharable 4.9.1
> \\_SB_.C14A irq*11: [11] 11+ low,level,sharable 4.9.2
> \\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.9.3
> \\_SB_.C149 irq*11: [11] 11+ low,level,sharable 4.10.0
> \\_SB_.C14A irq*11: [11] 11+ low,level,sharable 4.10.1
> \\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.10.2
> \\_SB_.C148 irq  0: [11]  0+ low,level,sharable 4.10.3
> pci4: <ACPI PCI bus> on pcib2
> pci4: physical bus=4
> 	map[10]: type 4, range 32, base 000001e0, size  3, enabled
> 	map[14]: type 4, range 32, base 000003e4, size  2, enabled
> 	map[18]: type 4, range 32, base 00000160, size  3, enabled
> 	map[1c]: type 4, range 32, base 00000364, size  2, enabled
> 	map[20]: type 4, range 32, base 00000190, size  4, enabled
> pcib2: matched entry for 4.7.INTA (src \\_SB_.C142)
> pcib2: slot 7 INTA is already routed to irq 11
> found->	vendor=0x1095, dev=0x0646, revid=0x07
> 	bus=4, slot=7, func=0
> 	class=01-01-8f, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
> 	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
> 	intpin=a, irq=11
> 	powerspec 1  supports D0 D1 D2 D3  current D0
> atapci1: <CMD 646U2 UDMA33 controller> port 0x190-0x19f,0x364-
> 0x367,0x160-0x167,0x3e4-0x3e7,0x1e0-0x1e7 irq 11 at device 7.0 on pci4
> atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x190
> atapci1: [MPSAFE]
> ata2: channel #0 on atapci1
> atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1e0
> atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x3e4
> ata2: reset tp1 mask=00 ostat0=ff ostat1=ff
> ata2: [MPSAFE]
> ata3: channel #1 on atapci1
> atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x160
> atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x364
> ata3: reset tp1 mask=00 ostat0=ff ostat1=ff
> ata3: [MPSAFE]
> acpi_button0: <Sleep Button> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> acpi_cmbat0: <Control Method Battery> on acpi0
> acpi_cmbat1: <Control Method Battery> on acpi0
> acpi_cmbat2: <Control Method Battery> on acpi0
> acpi_cmbat3: <Control Method Battery> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> unknown: not probed (disabled)
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0065
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: unable to allocate IRQ
> psmcpnp0 irq 12 on acpi0
> psm0: current command byte:0065
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Synaptics Touchpad, device ID 0-00, 3 buttons
> psm0: config:00000000, flags:00000008, packet size:6
> psm0: syncmask:c0, syncbits:00
> sio0: irq maps: 0x1 0x11 0x1 0x1
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2
> on acpi0
> fdc0: ic_type 90 part_id 80
> fdc0: [MPSAFE]
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio1: irq maps: 0x1 0x9 0x1 0x1
> sio1 port 0x100-0x107,0x3e8-0x3ef irq 3 drq 5 on acpi0
> sio1: type 16550A
> ppc0: using extended I/O port range
> ppc0: EPP SPP
> ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> plip0: bpf attached
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> unknown: not probed (disabled)
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> atkbdc: atkbdc0 already exists; skipping it
> fdc: fdc0 already exists; skipping it
> ppc: ppc0 already exists; skipping it
> sio: sio0 already exists; skipping it
> sio: sio1 already exists; skipping it
> Trying Read_Port at 203
> Trying Read_Port at 243
> Trying Read_Port at 283
> Trying Read_Port at 2c3
> Trying Read_Port at 303
> Trying Read_Port at 343
> Trying Read_Port at 383
> Trying Read_Port at 3c3
> ex_isa_identify()
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
> pmtimer0 on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> lnc0: not probed (disabled)
> pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
> pcic1: not probed (disabled)
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> fb0: vga0, vga, type:VGA (5), flags:0x7007f
> fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
> fb0: init mode:24, bios mode:3, current mode:24
> fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
> vga0: vga: WARNING: video mode switching is not fully supported on this
> adapter
> VGA parameters upon power-up
> 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
> 9e 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
> 9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> VGA parameters in BIOS for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> EGA/VGA parameters to be used for mode 24
> 50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
> 9e 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
> 9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> Device configuration finished.
> procfs registered
> Timecounter "TSC" frequency 995675479 Hz quality 800
> Timecounters tick every 10.000 msec
> lo0: bpf attached
> cpu0: set speed to 100.0%
> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
> acpi_acad0: acline initialization start
> acpi_acad0: On Line
> acpi_acad0: acline initialization done, tried 1 times
> acpi_cmbat0: battery initialization start
> acpi_cmbat0: battery initialization done, tried 1 times
> acpi_cmbat1: battery initialization start
> acpi_cmbat2: battery initialization start
> acpi_cmbat3: battery initialization start
> acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0
> acpi_tz0: _AC1: temperature 65.0 >= setpoint 65.0
> acpi_tz0: switched from _AC0 to _AC1: 65.0C
> acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0
> acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0
> acpi_tz0: switched from _AC1 to _AC2: 65.0C
> fdc0: output ready timeout
> fdc0: output ready timeout
> fdc0: output ready timeout
> fdc0: output ready timeout
> fdc0: output ready timeout
> fdc0: output ready timeout
> fdc0: output ready timeout
> ata0-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
> ATAPI_RESET time = 5380us
> ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin
> ata0-master: setting PIO4 on Intel PIIX4 chip
> ata0-master: setting UDMA33 on Intel PIIX4 chip
> ata0-slave: setting PIO4 on Intel PIIX4 chip
> ad0: <SAMSUNG MP0402H/UC100-11> ATA-7 disk at ata0-master
> ad0: 38204MB (78242976 sectors), 77622 C, 16 H, 63 S, 512 B
> ad0: 16 secs/int, 1 depth queue, UDMA33
> ar: FreeBSD check1 failed
> acd0: <CD-224E/9.0B> CDROM drive at ata0 as slave
> acd0: read 4134KB/s (4134KB/s), 512KB buffer, PIO4
> acd0: Reads: CDR, CDDA stream
> acd0: Writes:
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> fdc0: output ready timeout
> fdc0: input ready timeout
> fdc0: input ready timeout
> fdc0: output ready timeout
> fdc0: input ready timeout
> fdc0: input ready timeout
> fdc0: output ready timeout
> fdc0: input ready timeout
> fdc0: input ready timeout
> fdc0: output ready timeout
> fdc0: input ready timeout
> fdc0: input ready timeout
> GEOM: new disk ad0
> [0] f:00 typ:11 s(CHS):95/16/1 e(CHS):961/224/63 s:1527183 l:13925457
> [1] f:80 typ:165 s(CHS):0/1/1 e(CHS):94/254/63 s:63 l:1526112
> [2] f:00 typ:165 s(CHS):961/225/1 e(CHS):1023/254/63 s:15452640
> l:62783910
> [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> GEOM: Configure ad0s1, start 781917696 length 7129833984 end 7911751679
> GEOM: Configure ad0s2, start 32256 length 781369344 end 781401599
> GEOM: Configure ad0s3, start 7911751680 length 32145361920 end
> 40057113599
> GEOM: Configure ad0s2a, start 0 length 781369344 end 781369343
> GEOM: Configure ad0s2c, start 0 length 781369344 end 781369343
> GEOM: Configure ad0s3b, start 0 length 1073741824 end 1073741823
> GEOM: Configure ad0s3c, start 0 length 32145361920 end 32145361919
> GEOM: Configure ad0s3d, start 1073741824 length 4294967296 end
> 5368709119
> GEOM: Configure ad0s3e, start 5368709120 length 4294967296 end
> 9663676415
> GEOM: Configure ad0s3f, start 9663676416 length 22481685504 end
> 32145361919
> (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (probe0:umass-sim0:0:0:0): Retrying Command
> (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (probe0:umass-sim0:0:0:0): Retrying Command
> (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (probe0:umass-sim0:0:0:0): Retrying Command
> (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (probe0:umass-sim0:0:0:0): Retrying Command
> (probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
> (probe0:umass-sim0:0:0:0): error 5
> (probe0:umass-sim0:0:0:0): Retries Exausted
> pass0 at umass-sim1 bus 1 target 0 lun 0
> pass0: <I-Stick2 IntelligentStick 2.00> Removable Direct Access SCSI-2
> device
> pass0: Serial Number \^_
> pass0: 1.000MB/s transfers
> GEOM: new disk da0
> da0 at umass-sim1 bus 1 target 0 lun 0
> da0: <I-Stick2 IntelligentStick 2.00> Removable Direct Access SCSI-2
> device
> da0: Serial Number \^_
> da0: 1.000MB/s transfers
> da0: 249MB (511488 512 byte sectors: 64H 32S/T 249C)
> [0] f:00 typ:6 s(CHS):0/1/1 e(CHS):247/63/32 s:32 l:507872
> [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
> GEOM: Configure da0s1, start 16384 length 260030464 end 260046847
> Mounting root from ufs:/dev/ad0s2a
> start_init: trying /sbin/init
> 
> 
> --
> Alex
> _______________________________________________
> freebsd-mobile at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobile-
> unsubscribe at freebsd.org"



More information about the freebsd-mobile mailing list