Troubles with Compaq Armada E500

Alex Povolotsky tarkhil at webmail.sub.ru
Tue Sep 21 03:23:44 PDT 2004


Hello!

I'm trying to set up 5.3BETA5 on Compaq Armada E500, and I've run into the trouble: I cannot attach fxp0; it is on miniPCI, and OS can see it but cannot allocate interrupt.

maybe someone can help?

Here is my dmesg output:

Rebooting...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA5 #0: Sun Sep 19 02:35:12 UTC 2004
    root at wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a0c000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a0c1cc.
Calibrating clock(s) ... i8254 clock: 1193259 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 995675479 Hz
CPU: Intel Pentium III (995.68-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000000fb3ffff, 250703872 bytes (61207 pages)
avail memory = 252964864 (241 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x478
pnpbios: Found PnP BIOS data at 0xc00fbe10
pnpbios: Entry = f0000:be3e  Rev = 1.0
pnpbios: Event flag at fbe36
pnpbios: OEM ID 51b1110e
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ RSDTBL> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 4 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 4 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 6, width = 4
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
acpi link get: empty IRQ resource
ACPI PCI link initial configuration:
\\_SB_.C142 irq  0: [11] 11+ low,level,sharable 0.1.0
\\_SB_.C142 irq  0: [11] 11+ low,level,sharable 0.4.0
\\_SB_.C142 irq  0: [11] 11+ low,level,sharable 0.4.1
\\_SB_.C14A irq  0: [11] 11+ low,level,sharable 0.7.3
\\_SB_.C149 irq  0: [11] 11+ low,level,sharable 0.8.0
\\_SB_.C149 irq  0: [11] 11+ low,level,sharable 0.9.0
\\_SB_.C14A irq  0: [11] 11+ low,level,sharable 0.9.1
\\_SB_.C142 irq  0: [11] 11+ low,level,sharable 0.16.0
\\_SB_.C148 irq  0: [11]  0+ low,level,sharable 0.16.1
\\_SB_.C149 irq  0: [11] 11+ low,level,sharable 0.16.2
\\_SB_.C14A irq  0: [11] 11+ low,level,sharable 0.16.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base 50000000, size 26, enabled
found->	vendor=0x8086, dev=0x7190, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0xa210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7191, revid=0x03
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0003, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base 41100000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.C142)
pcib0: possible interrupts: 11
ACPI PCI link arbitrated settings:
\\_SB_.C142 (references 4, priority 440):
	interrupts:	    11
	penalty:	   110
\\_SB_.C14A (references 3, priority 330):
	interrupts:	    11
	penalty:	   110
\\_SB_.C149 (references 3, priority 330):
	interrupts:	    11
	penalty:	   110
\\_SB_.C148 (references 1, priority 110):
	interrupts:	    11
	penalty:	   110
pcib0: slot 4 INTA routed to irq 11 via \\_SB_.C142
found->	vendor=0x104c, dev=0xac1c, revid=0x01
	bus=0, slot=4, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 41180000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.C142)
pcib0: slot 4 INTA is already routed to irq 11
found->	vendor=0x104c, dev=0xac1c, revid=0x01
	bus=0, slot=4, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
found->	vendor=0x8086, dev=0x7110, revid=0x02
	bus=0, slot=7, func=0
	class=06-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00004010, size  4, enabled
found->	vendor=0x8086, dev=0x7111, revid=0x01
	bus=0, slot=7, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00004020, size  5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.C14A)
pcib0: possible interrupts: 11
ACPI PCI link arbitrated settings:
\\_SB_.C14A (references 3, priority 780):
	interrupts:	    11
	penalty:	   260
\\_SB_.C149 (references 3, priority 780):
	interrupts:	    11
	penalty:	   260
\\_SB_.C148 (references 1, priority 260):
	interrupts:	    11
	penalty:	   260
pcib0: slot 7 INTD routed to irq 11 via \\_SB_.C14A
found->	vendor=0x8086, dev=0x7112, revid=0x01
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	map[90]: type 4, range 32, base 00004000, size  4, enabled
found->	vendor=0x8086, dev=0x7113, revid=0x03
	bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00004400, size  8, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.C149)
pcib0: possible interrupts: 11
ACPI PCI link arbitrated settings:
\\_SB_.C149 (references 3, priority 1200):
	interrupts:	    11
	penalty:	   400
\\_SB_.C148 (references 1, priority 400):
	interrupts:	    11
	penalty:	   400
pcib0: slot 8 INTA routed to irq 11 via \\_SB_.C149
found->	vendor=0x125d, dev=0x1978, revid=0x10
	bus=0, slot=8, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x8086, dev=0x1229, revid=0xff
	bus=0, slot=9, func=0
	class=02-ff-ff, hdrtype=0x7f, mfdev=1
	cmdreg=0x0000, statreg=0x8290, cachelnsz=255 (dwords)
	lattimer=0xff (7650 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns)
	intpin=_, irq=255
found->	vendor=0x8086, dev=0x124b, revid=0x01
	bus=0, slot=12, func=0
	class=06-04-80, hdrtype=0x01, mfdev=0
	cmdreg=0x0087, statreg=0x0400, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x50000000-0x53ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x50000000
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0x40000000-0x410fffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pcib1: could not get PCI interrupt routing table for \\_SB_.C005.C012 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base 40000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0x40000000-0x40ffffff
	map[14]: type 4, range 32, base 00003000, size  8, enabled
pcib1: device (null) requested decoded I/O range 0x3000-0x30ff
	map[18]: type 1, range 32, base 41000000, size 12, enabled
pcib1: device (null) requested decoded memory range 0x41000000-0x41000fff
pcib0: matched entry for 0.1.INTA (src \\_SB_.C142)
pcib0: slot 1 INTA is already routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found->	vendor=0x1002, dev=0x4c4d, revid=0x64
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1225 PCI-CardBus Bridge> mem 0x41100000-0x41100fff irq 11 at device 4.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41100000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0xac1c104c 0x02100007 0x06070001 0x00824208 
  0x10: 0x41100000 0x020000a0 0x20020200 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010b 
  0x40: 0xb1210e11 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x28049060 0x00000000 0x00000000 0x01001c72 
  0x90: 0x60642280 0x00000000 0x00000000 0x00000000 
  0xa0: 0x7e210001 0x00800000 0x00000801 0x0000001f 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <TI1225 PCI-CardBus Bridge> mem 0x41180000-0x41180fff irq 11 at device 4.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41180000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0xac1c104c 0x02100007 0x06070001 0x00824208 
  0x10: 0x41180000 0x020000a0 0x20030300 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010b 
  0x40: 0xb1210e11 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x28449060 0x00000000 0x00000000 0x01001c72 
  0x90: 0x60642280 0x00000000 0x00000000 0x00000000 
  0xa0: 0x7e210001 0x00800000 0x00000801 0x0000001f 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x4010-0x401f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4010
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4020-0x403f irq 11 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Atmel UHB124 hub, class 9/0, rev 1.00/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
umass0: AOPEN Aopen USB2.0 Device, rev 2.00/0.01, addr 3
umass0: Get Max Lun not supported (STALLED)
umass0:0:0:-1: Attached to scbus0
umass1: USB Flash Disk, rev 2.00/2.00, addr 4
umass1:1:1:-1: Attached to scbus1
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 8.0 (no driver attached)
fxp0: <Intel 82557/8/9 Pro/100 Ethernet> at device 9.0 on pci0
fxp0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
fxp0: using memory space register mapping
pcib0: no PRT entry for 0.9.INT?
fxp0: could not map interrupt
device_attach: fxp0 attach returned 6
pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib2:   secondary bus     4
pcib2:   subordinate bus   4
pcib2:   I/O decode        0x0-0xfff
pcib2:   memory decode     0x0-0xfffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pcib2:   Subtractively decoded bridge.
ACPI PCI link initial configuration:
\\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.7.0
\\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.8.0
\\_SB_.C148 irq  0: [11]  0+ low,level,sharable 4.8.1
\\_SB_.C149 irq*11: [11] 11+ low,level,sharable 4.8.2
\\_SB_.C14A irq*11: [11] 11+ low,level,sharable 4.8.3
\\_SB_.C148 irq  0: [11]  0+ low,level,sharable 4.9.0
\\_SB_.C149 irq*11: [11] 11+ low,level,sharable 4.9.1
\\_SB_.C14A irq*11: [11] 11+ low,level,sharable 4.9.2
\\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.9.3
\\_SB_.C149 irq*11: [11] 11+ low,level,sharable 4.10.0
\\_SB_.C14A irq*11: [11] 11+ low,level,sharable 4.10.1
\\_SB_.C142 irq*11: [11] 11+ low,level,sharable 4.10.2
\\_SB_.C148 irq  0: [11]  0+ low,level,sharable 4.10.3
pci4: <ACPI PCI bus> on pcib2
pci4: physical bus=4
	map[10]: type 4, range 32, base 000001e0, size  3, enabled
	map[14]: type 4, range 32, base 000003e4, size  2, enabled
	map[18]: type 4, range 32, base 00000160, size  3, enabled
	map[1c]: type 4, range 32, base 00000364, size  2, enabled
	map[20]: type 4, range 32, base 00000190, size  4, enabled
pcib2: matched entry for 4.7.INTA (src \\_SB_.C142)
pcib2: slot 7 INTA is already routed to irq 11
found->	vendor=0x1095, dev=0x0646, revid=0x07
	bus=4, slot=7, func=0
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
atapci1: <CMD 646U2 UDMA33 controller> port 0x190-0x19f,0x364-0x367,0x160-0x167,0x3e4-0x3e7,0x1e0-0x1e7 irq 11 at device 7.0 on pci4
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x190
atapci1: [MPSAFE]
ata2: channel #0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1e0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x3e4
ata2: reset tp1 mask=00 ostat0=ff ostat1=ff
ata2: [MPSAFE]
ata3: channel #1 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x160
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x364
ata3: reset tp1 mask=00 ostat0=ff ostat1=ff
ata3: [MPSAFE]
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_cmbat2: <Control Method Battery> on acpi0
acpi_cmbat3: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:6
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x100-0x107,0x3e8-0x3ef irq 3 drq 5 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83 
9e 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f 
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83 
9e 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f 
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 995675479 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_cmbat2: battery initialization start
acpi_cmbat3: battery initialization start
acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0
acpi_tz0: _AC1: temperature 65.0 >= setpoint 65.0
acpi_tz0: switched from _AC0 to _AC1: 65.0C
acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0
acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0
acpi_tz0: switched from _AC1 to _AC2: 65.0C
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ata0-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ATAPI_RESET time = 5380us
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ata0-slave: setting PIO4 on Intel PIIX4 chip
ad0: <SAMSUNG MP0402H/UC100-11> ATA-7 disk at ata0-master
ad0: 38204MB (78242976 sectors), 77622 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ar: FreeBSD check1 failed
acd0: <CD-224E/9.0B> CDROM drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDDA stream
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
GEOM: new disk ad0
[0] f:00 typ:11 s(CHS):95/16/1 e(CHS):961/224/63 s:1527183 l:13925457
[1] f:80 typ:165 s(CHS):0/1/1 e(CHS):94/254/63 s:63 l:1526112
[2] f:00 typ:165 s(CHS):961/225/1 e(CHS):1023/254/63 s:15452640 l:62783910
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 781917696 length 7129833984 end 7911751679
GEOM: Configure ad0s2, start 32256 length 781369344 end 781401599
GEOM: Configure ad0s3, start 7911751680 length 32145361920 end 40057113599
GEOM: Configure ad0s2a, start 0 length 781369344 end 781369343
GEOM: Configure ad0s2c, start 0 length 781369344 end 781369343
GEOM: Configure ad0s3b, start 0 length 1073741824 end 1073741823
GEOM: Configure ad0s3c, start 0 length 32145361920 end 32145361919
GEOM: Configure ad0s3d, start 1073741824 length 4294967296 end 5368709119
GEOM: Configure ad0s3e, start 5368709120 length 4294967296 end 9663676415
GEOM: Configure ad0s3f, start 9663676416 length 22481685504 end 32145361919
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): error 5
(probe0:umass-sim0:0:0:0): Retries Exausted
pass0 at umass-sim1 bus 1 target 0 lun 0
pass0: <I-Stick2 IntelligentStick 2.00> Removable Direct Access SCSI-2 device 
pass0: Serial Number \^_
pass0: 1.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <I-Stick2 IntelligentStick 2.00> Removable Direct Access SCSI-2 device 
da0: Serial Number \^_
da0: 1.000MB/s transfers
da0: 249MB (511488 512 byte sectors: 64H 32S/T 249C)
[0] f:00 typ:6 s(CHS):0/1/1 e(CHS):247/63/32 s:32 l:507872
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 16384 length 260030464 end 260046847
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init


-- 
Alex


More information about the freebsd-mobile mailing list