pccbb pccard rman - Something is very wrong somewhere
Carlos Velasco
freebsd at newipnet.com
Tue Apr 6 05:51:53 PDT 2004
Mauritz,
CURRENT is checking for allocated memory yet (see messages: region is
allocated).
cbb0 is initialized and get the first 0x88000000 (pccbb.c. #define
CBB_START_MEM 0x88000000):
cbb0: <TI1225 PCI-CardBus Bridge> at device 3.0 on pci0
rman_reserve_resource: <I/O memory addresses> request: [0x88000000,
0xffffffff], length 0x1000, flags 12288, device cbb0
considering [0, 0xf3ffffff]
truncated region: [0x88000000, 0xf3ffffff]; size 0x6c000000 (requested
0x1000)
candidate region: [0xf3ffffff, 0x88000000], size 0x6c000000
splitting region in three parts: [0, 0x87ffffff]; [0x88000000, 0x88000fff];
[0x88001000, 0xf3ffffff]
cbb0: PCI Memory allocated: 88000000
later, ccb1 is initilized and get 0x88001000:
cbb1: <TI1225 PCI-CardBus Bridge> at device 3.1 on pci0
rman_reserve_resource: <I/O memory addresses> request: [0x88000000,
0xffffffff], length 0x1000, flags 12288, device cbb1
considering [0x88000000, 0x88000fff]
region is allocated
considering [0x88001000, 0xf3ffffff]
truncated region: [0x88001000, 0xf3ffffff]; size 0x6bfff000 (requested
0x1000)
candidate region: [0xf3ffffff, 0x88001000], size 0x6bfff000
allocating from the beginning
cbb1: PCI Memory allocated: 88001000
later... PCCARD ask for resources to cbb (dependant) and obtain 0x88002000:
pccard0: read_cis
rman_reserve_resource: <I/O memory addresses> request: [0x88000000,
0xffffffff], length 0x400, flags 12288, device pccard0
considering [0x88000000, 0x88000fff]
region is allocated
considering [0x88001000, 0x88001fff]
region is allocated
considering [0x88002000, 0xf3ffffff]
truncated region: [0x88002000, 0xf3ffffff]; size 0x6bffe000 (requested
0x400)
candidate region: [0xf3ffffff, 0x88002000], size 0x6bffe000
allocating from the beginning
cis mem map 0xdc6c9000 (resource: 0x88002000)
pccard0: CIS tuple chain:
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
TOO MANY CIS_NONE
CIS is too long -- truncating
CISTPL_END
ff
cis mem map dc6c9000
CISTPL_LINKTARGET expected, code 40 observed
pccard0: check_cis_quirks
pccard0: Card has no functions!
cbb0: PC Card card activation failed
I'm not an expertinto this but if you, after boot, change value
hw.cbb.start_memory to any non aligned value (to 0x10000) it will fail.
Also, you can workaround the error if you define in hint something like:
hw.cbb.start_memory="0x87FFE000", that lets 0x87FFE000 to cbb0, 0x87FFF000
to cbb1 and 0x88000000 to pccard0 that makes this aligned.
So I really think that pccard allocation needs alignment to 0x10000, I
don't know exactly why.
Regards,
Carlos Velasco
*********** REPLY SEPARATOR ***********
On 06/04/2004 at 13:47 Mauritz Sundell wrote:
>(I have not followed this thread from the beginning
>so please excuse me if I have missed something)
>
>I do not think this is an alignment-related error.
>The cbb only wants 4096 bytes so why must it be aligned
>on bigger blocks. What you do are that you disqualify
>the address rman chooses on your system, what is bad
>somehow.
>
>I had maybe the same problem when I first upgraded from 4.X to 5.X.
>
>Can you check if some other device also have got the
>same memory area assigned (later in dmesg)?
>
>The problem for me are that when memory for the pccard gets allocated
>FreeBSD takes the next available memory
>but dont check the list of reserved memory areas that
>it got from BIOS before, and actually it allocates the
>memory that BIOS has wired to my fxp0 device that is
>initiated after my cbb.
>So I have to set hw.cbb.start_memory in /boot/device.hints to a memory
>area that I has beforehande confirmed that it is free (4096-aligned)
>
>
>-----Original Message-----
>From: "Carlos Velasco" <freebsd at newipnet.com>
>To: "M. Warner Losh" <imp at bsdimp.com>, jon at freebsd.org, marc at mit.edu,
>freebsd-current at freebsd.org, freebsd-mobile at freebsd.org
>Date: Tue, 06 Apr 2004 12:55:15 +0200
>Subject: Re: pccbb pccard rman - Something is very wrong somewhere
>
>Hello,
>
>Investigating this problem, I have discovered two issues.
>
>One minor bug (off-by-1) in subr_rman.c:
>
>diff -ur sys/kern/subr_rman.c sysnew/kern/subr_rman.c
>--- sys/kern/subr_rman.c Wed Jun 11 00:56:57 2003
>+++ sysnew/kern/subr_rman.c Tue Apr 6 11:41:23 2004
>@@ -234,7 +234,7 @@
> rstart += bound - (rstart & ~bmask);
> } while ((rstart & amask) != 0 && rstart < end &&
> rstart < s->r_end);
>- rend = ulmin(s->r_end, ulmax(rstart + count, end));
>+ rend = ulmin(s->r_end, ulmax(rstart + count - 1, end));
> if (rstart > rend) {
> DPRINTF(("adjusted start exceeds end\n"));
> continue;
>
>And the real problem, an alignment issue that prevents pccard to work:
>
>diff -ur sys/dev/pccbb/pccbbreg.h sysnew/dev/pccbb/pccbbreg.h
>--- sys/dev/pccbb/pccbbreg.h Sat Aug 9 20:49:22 2003
>+++ sysnew/dev/pccbb/pccbbreg.h Tue Apr 6 11:40:13 2004
>@@ -74,8 +74,8 @@
> #define CBBR_IOLIMIT0 0x30 /* len=4 */
> #define CBBR_IOBASE1 0x34 /* len=4 */
> #define CBBR_IOLIMIT1 0x38 /* len=4 */
>-#define CBB_MEMALIGN 4096
>-#define CBB_MEMALIGN_BITS 12
>+#define CBB_MEMALIGN 65536
>+#define CBB_MEMALIGN_BITS 16
> #define CBB_IOALIGN 4
> #define CBB_IOALIGN_BITS 2
>
>
>We are aligning to 0x1000 (4096) and we should align to, at least, 0x10000
>(65536).
>This solves the problem.
>
>Can anyone review these patches and commit them if they are right?
>
>Regards,
>Carlos Velasco
>
>*********** REPLY SEPARATOR ***********
>
>On 04/04/2004 at 23:42 Carlos Velasco wrote:
>
>>Hello,
>>
>>I have been trying to find this exact bug but I have been unable. Any
help
>>would be apreciated.
>>
>>Using 5.2-Current
>>
>>Problem related to pccard using NEWCARD (OLDCARD works ok), not reading
>>CIS.
>>Googling I have found some reference:
>>http://lists.freebsd.org/pipermail/freebsd-mobile/2003-December/002611.htm
l
>
>>
>>Activating debugs I find something really weird:
>>
>>1. cbb1 allocating from beginning??
>>allocating from the beginning
>>2. size 0x6bffe000????
>>truncated region: [0x88002000, 0xf3ffffff]; size 0x6bffe000 (requested
>>0x400)
>>
>>If, _after boot_ , I change value hw.cbb.start_memory to 0xd0000000:
>>hw.cbb.start_memory: 3489660928
>>PCMCIA works.
>>
>>I have been investigating the issue in subr_rman.c, as I have showed that
>>cbb resourses are the only that hit "region is allocated" and success
>after
>>it, but I haven't found the problem.
>>
>>Here are some logs:
>>
>>cbb0: <TI1225 PCI-CardBus Bridge> at device 3.0 on pci0
>>rman_reserve_resource: <I/O memory addresses> request: [0x88000000,
>>0xffffffff], length 0x1000, flags 12288, device cbb0
>>considering [0, 0xf3ffffff]
>>truncated region: [0x88000000, 0xf3ffffff]; size 0x6c000000 (requested
>>0x1000)
>>candidate region: [0xf3ffffff, 0x88000000], size 0x6c000000
>>splitting region in three parts: [0, 0x87ffffff]; [0x88000000,
>0x88000fff];
>>[0x88001000, 0xf3ffffff]
>>cbb0: PCI Memory allocated: 88000000
>>cardbus0: <CardBus bus> on cbb0
>>pccard0: <16-bit PCCard bus> on cbb0
>>..
>>cbb1: <TI1225 PCI-CardBus Bridge> at device 3.1 on pci0
>>rman_reserve_resource: <I/O memory addresses> request: [0x88000000,
>>0xffffffff], length 0x1000, flags 12288, device cbb1
>>considering [0x88000000, 0x88000fff]
>>region is allocated
>>considering [0x88001000, 0xf3ffffff]
>>truncated region: [0x88001000, 0xf3ffffff]; size 0x6bfff000 (requested
>>0x1000)
>>candidate region: [0xf3ffffff, 0x88001000], size 0x6bfff000
>>allocating from the beginning
>>cbb1: PCI Memory allocated: 88001000
>>cardbus1: <CardBus bus> on cbb1
>>pccard1: <16-bit PCCard bus> on cbb1
>>..
>>Status is 0x30000410
>>cbb0: card inserted: event=0x00000000, state=30000410
>>pccard0: chip_socket_enable
>>cbb_pcic_socket_enable:
>>cbb0: cbb_power: 5V
>>pccard0: read_cis
>>rman_reserve_resource: <I/O memory addresses> request: [0x88000000,
>>0xffffffff], length 0x400, flags 12288, device pccard0
>>considering [0x88000000, 0x88000fff]
>>region is allocated
>>considering [0x88001000, 0x88001fff]
>>region is allocated
>>considering [0x88002000, 0xf3ffffff]
>>truncated region: [0x88002000, 0xf3ffffff]; size 0x6bffe000 (requested
>>0x400)
>>candidate region: [0xf3ffffff, 0x88002000], size 0x6bffe000
>>allocating from the beginning
>>cis mem map 0xdc6c9000 (resource: 0x88002000)
>>pccard0: CIS tuple chain:
>>CISTPL_NONE
>> 00
>>CISTPL_NONE
>> 00
>>CISTPL_NONE
>> 00
>>CISTPL_NONE
>> 00
>>CISTPL_NONE
>> 00
>>CISTPL_NONE
>> 00
>>CISTPL_NONE
>> 00
>>CISTPL_NONE
>> 00
>>CISTPL_NONE
>> 00
>>CISTPL_NONE
>> 00
>>TOO MANY CIS_NONE
>>CIS is too long -- truncating
>>CISTPL_END
>> ff
>>cis mem map dc6c9000
>>CISTPL_LINKTARGET expected, code 40 observed
>>pccard0: check_cis_quirks
>>pccard0: Card has no functions!
>>cbb0: PC Card card activation failed
>>Status is 0x30000006
>>
>>
>>After chaging start_memory:
>>
>>cbb0: card inserted: event=0x00000000, state=30000410
>>pccard0: chip_socket_enable
>>cbb_pcic_socket_enable:
>>cbb0: cbb_power: 5V
>>pccard0: read_cis
>>rman_reserve_resource: <I/O memory addresses> request: [0xd0000000,
>>0xffffffff], length 0x400, flags 12288, device pccard0
>>considering [0x88002000, 0xf3ffffff]
>>truncated region: [0xd0000000, 0xf3ffffff]; size 0x24000000 (requested
>>0x400)
>>candidate region: [0xf3ffffff, 0xd0000000], size 0x24000000
>>splitting region in three parts: [0x88002000, 0xcfffffff]; [0xd0000000,
>>0xd00003ff]; [0xd0000400, 0xf3ffffff]
>>cis mem map 0xdd91a000 (resource: 0xd0000000)
>>pccard0: CIS tuple chain:
>>CISTPL_DEVICE type=null speed=null
>> 01 02 00 ff
>>CISTPL_DEVICE_A type=null speed=null
>> 17 02 00 ff
>>CISTPL_VERS_1
>> 15 3b 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69
>> 74 43 61 72 64 20 45 74 68 65 72 6e 65 74 20 31
>> 30 2f 31 30 30 20 2b 20 4d 6f 64 65 6d 20 35 36
>> 00 43 45 4d 35 36 00 31 2e 30 30 00 ff
>>unhandled CISTPL 88
>> 88 08 73 2f f6 00 00 00 00 00
>>CISTPL_MANFID
>> 20 05 05 01 0a 11 46
>>unhandled CISTPL 44
>> 44 04 d2 3b 77 25
>>CISTPL_CONFIG
>> 1a 05 01 3f 80 ff 67
>>CISTPL_CFTABLE_ENTRY
>> 1b 14 e7 c1 9d 0f 55 4d 5d 4e e0 17 17 ea 60 e8
>> 02 07 f0 bc 8e 20
>>CISTPL_CFTABLE_ENTRY
>> 1b 07 1f 08 ea 60 e8 03 07
>>CISTPL_CFTABLE_ENTRY
>> 1b 07 17 08 ea 60 f8 02 07
>>CISTPL_CFTABLE_ENTRY
>> 1b 07 0f 08 ea 60 f8 03 07
>>CISTPL_CFTABLE_ENTRY
>> 1b 03 3f 08 63
>>CISTPL_FUNCID
>> 21 02 02 00
>>CISTPL_FUNCE
>> 22 04 00 02 0f 5c
>>CISTPL_FUNCE
>> 22 0c 02 06 00 3f 1c 03 03 0f 07 00 01 b5
>>CISTPL_FUNCE
>> 22 08 13 06 00 0b 00 02 00 b5
>>CISTPL_FUNCID
>> 21 02 06 00
>>CISTPL_FUNCE
>> 22 08 04 06 00 10 a4 f6 2f 73
>>unhandled CISTPL 8a
>> 8a 0c 39 30 30 31 48 52 46 36 32 46 37 33
>>unhandled CISTPL 8b
>> 8b 04 01 00 00 00
>>CISTPL_NO_LINK
>> 14 00
>>CISTPL_END
>> ff
>>pccard0: check_cis_quirks
>>pccard0: CIS version PC Card Standard 5.0
>>pccard0: CIS info: Xircom, CreditCard Ethernet 10/100 + Modem 56, CEM56,
>>1.00
>>pccard0: Manufacturer code 0x105, product 0x110a
>>pccard0: function 0: network adapter, ccr addr ff80 mask 67
>>pccard0: function 0, config table entry 39: I/O card; irq mask 8ebc;
>iomask
>>a, iospace 2e8-2ef; mwait_required rdybsy_active io8 io16 irqshare
>irqpulse
>>irqlevel powerdown
>>pccard0: function 0, config table entry 31: I/O card; irq mask 8ebc;
>iomask
>>a, iospace 3e8-3ef; mwait_required rdybsy_active io8 io16 irqshare
>irqpulse
>>irqlevel powerdown
>>pccard0: function 0, config table entry 23: I/O card; irq mask 8ebc;
>iomask
>>a, iospace 2f8-2ff; mwait_required rdybsy_active io8 io16 irqshare
>irqpulse
>>irqlevel powerdown
>>pccard0: function 0, config table entry 15: I/O card; irq mask 8ebc;
>iomask
>>a, iospace 3f8-3ff; mwait_required rdybsy_active io8 io16 irqshare
>irqpulse
>>irqlevel powerdown
>>pccard0: function 0, config table entry 63: I/O card; irq mask 8ebc;
>iomask
>>3, iospace 0-7; mwait_required rdybsy_active io8 io16 irqshare irqpulse
>>irqlevel powerdown
>>pccard0: functions scanning
>>pccard0: Card has 1 functions. pccard_mfc is 0
>>pccard0: I/O rid 0 start 2e8 end 2ef
>>rman_reserve_resource: <I/O ports> request: [0x2e8, 0x2ef], length 0x8,
>>flags 3072, device pccard0
>>considering [0x1f8, 0x2f7]
>>truncated region: [0x2e8, 0x2f0]; size 0x9 (requested 0x8)
>>candidate region: [0x2f0, 0x2e8], size 0x9
>>splitting region in three parts: [0x1f8, 0x2e7]; [0x2e8, 0x2ef]; [0x2f0,
>>0x2f7]
>>rman_reserve_resource: <Interrupt request lines> request: [0xb, 0xb],
>>length 0x1, flags 4, device pccard0
>>considering [0xb, 0xb]
>>region is allocated
>>considering [0xc, 0xc]
>>s->r_start (0xc) > end (0xb)
>>no unshared regions found
>>cbb_pcic_socket_enable:
>>cbb0: cbb_power: 0V
>>cbb0: cbb_power: 5V
>>rman_reserve_resource: <I/O memory addresses> request: [0xd0000000,
>>0xffffffff], length 0x400, flags 12288, device pccard0
>>considering [0x88002000, 0xf3ffffff]
>>truncated region: [0xd0000000, 0xf3ffffff]; size 0x24000000 (requested
>>0x400)
>>candidate region: [0xf3ffffff, 0xd0000000], size 0x24000000
>>splitting region in three parts: [0x88002000, 0xcfffffff]; [0xd0000000,
>>0xd00003ff]; [0xd0000400, 0xf3ffffff]
>>pccard0: ccr_res == d0000000-d00003ff, base=ff80
>>pccard0: function 0 CCR at 0 offset f80: 67 0 0 0, 0 0 ff ff, ff
>>xe0: <Xircom CreditCard Ethernet 10/100 + Modem 56> at port 0x2e8-0x2ef
>irq
>>11 function 0 config 39 on pccard0
>>rman_reserve_resource: <I/O ports> request: [0x100, 0x3ff], length 0x10,
>>flags 0, device pccard0
>>considering [0x65, 0x16f]
>>truncated region: [0x100, 0x16f]; size 0x70 (requested 0x10)
>>candidate region: [0x16f, 0x100], size 0x70
>>splitting region in three parts: [0x65, 0xff]; [0x100, 0x10f]; [0x110,
>>0x16f]
>>rman_reserve_resource: <I/O ports> request: [0x100, 0x10f], length 0x10,
>>flags 4096, device xe0
>>considering [0x65, 0x16f]
>>truncated region: [0x100, 0x110]; size 0x11 (requested 0x10)
>>candidate region: [0x110, 0x100], size 0x11
>>splitting region in three parts: [0x65, 0xff]; [0x100, 0x10f]; [0x110,
>>0x16f]
>>rman_reserve_resource: <Interrupt request lines> request: [0xb, 0xb],
>>length 0x1, flags 4, device xe0
>>considering [0xb, 0xb]
>>region is allocated
>>considering [0xc, 0xc]
>>s->r_start (0xc) > end (0xb)
>>no unshared regions found
>>xe0: [GIANT-LOCKED]
>>rman_reserve_resource: <I/O memory addresses> request: [0xd0000000,
>>0xffffffff], length 0x1000, flags 12288, device pccard0
>>considering [0xd0000000, 0xd00003ff]
>>region is allocated
>>considering [0xd0000400, 0xf3ffffff]
>>truncated region: [0xd0001000, 0xf3ffffff]; size 0x23fff000 (requested
>>0x1000)
>>candidate region: [0xf3ffffff, 0xd0001000], size 0x23fff000
>>splitting region in three parts: [0xd0000400, 0xd0000fff]; [0xd0001000,
>>0xd0001fff]; [0xd0002000, 0xf3ffffff]
>>rman_reserve_resource: <I/O memory addresses> request: [0xd0001000,
>>0xd0001fff], length 0x1000, flags 12288, device xe0
>>considering [0xd0000400, 0xf3ffffff]
>>truncated region: [0xd0001000, 0xd0002000]; size 0x1001 (requested
0x1000)
>>candidate region: [0xd0002000, 0xd0001000], size 0x1001
>>splitting region in three parts: [0xd0000400, 0xd0000fff]; [0xd0001000,
>>0xd0001fff]; [0xd0002000, 0xf3ffffff]
>>rman_reserve_resource: <I/O memory addresses> request: [0xd0001000,
>>0xd0001fff], length 0x1000, flags 12288, device pccard0
>>considering [0xd0000400, 0xf3ffffff]
>>truncated region: [0xd0001000, 0xd0002000]; size 0x1001 (requested
0x1000)
>>candidate region: [0xd0002000, 0xd0001000], size 0x1001
>>splitting region in three parts: [0xd0000400, 0xd0000fff]; [0xd0001000,
>>0xd0001fff]; [0xd0002000, 0xf3ffffff]
>>xe0: Xircom CEM56, version 0x55/0x05, 100Mbps capable, with modem
>>xe0: Ethernet address: 00:10:a4:f6:2f:73
>>pccard0: function 0 CCR at 0 offset f80 mask 67: 67 80 ee e8, e8 2 67 67,
>>67
>>
>>
>>Regards,
>>Carlos Velasco
>>
>>_______________________________________________
>>freebsd-mobile at freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
>>To unsubscribe, send any mail to "freebsd-mobile-unsubscribe at freebsd.org"
>
>
>
>_______________________________________________
>freebsd-mobile at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
>To unsubscribe, send any mail to "freebsd-mobile-unsubscribe at freebsd.org"
More information about the freebsd-mobile
mailing list