JVC MP-XP7250 mini laptop

Hajimu UMEMOTO ume at mahoroba.org
Tue Apr 29 20:37:27 PDT 2003


Hi,

>>>>> On Tue, 29 Apr 2003 21:45:17 +0200
>>>>> Wolfgang Kess <bsdlist at kess.ch> said:

bsdlist> It's a 7230 with integrated IEEE 802.11b  http://www.jvc.de/eu/mpxp/xp.html

I see.
 
> bsdlist> I found a page about the XP7210 and Linux http://emdete.de/mp-xp/index.html
> 
> I'm using 7210 with 5-CURRENT.  It's fine to me.

bsdlist> That's very good. 
bsdlist> PC-Card Slot, FireWire, build-in Ethernet, USB and Sound are supported?

USB is usable unless you do suspend/resume.
Sound is working on my 7210.  However, sometimes noise is mixed.  A
friend of mine claims that his sound doesn't work at all on his 7210.
Though ATA should be available with UDMA100, it recognized only
UDMA33, now.  I could use it with UDMA100 until begining of this year.
But, the changes on ata seems broke.
FireWire is recognized.  But, I don't have any FireWire device.
PC-Card and build-in Ethernet is working fine.

bsdlist> Please could you send me the dmesg output?

Okay.  Here is:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Apr 27 21:45:01 JST 2003
    root at lyrics.mahoroba.org:/ad0s3/usr/obj/usr/src/sys/LYRICS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0576000.
Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc05760a8.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc0576154.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc0576200.
Preloaded elf module "/boot/kernel/snd_t4dwave.ko" at 0xc05762ac.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc057635c.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc0576408.
Preloaded elf module "/boot/kernel/ugen.ko" at 0xc05764b0.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc057655c.
Preloaded elf module "/boot/kernel/cam.ko" at 0xc0576608.
Preloaded elf module "/boot/kernel/uplcom.ko" at 0xc05766b0.
Preloaded elf module "/boot/kernel/ucom.ko" at 0xc057675c.
Preloaded elf module "/boot/kernel/firewire.ko" at 0xc0576808.
Preloaded elf module "/boot/kernel/aout.ko" at 0xc05768b8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0576964.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 797463033 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU       800MHz (797.46-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 385855488 (367 MB)
avail memory = 368803840 (351 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <J1     J1      > on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
    ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
pcibios: BIOS version 2.10
Using $PIR table, 5 entries at 0xc00f1530
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
atapci0: <SiS 630S UDMA100 controller> port 0xd800-0xd80f at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xd3800000-0xd3800fff irq 5 at device 1.1 on pci0
sis0: Ethernet address: 00:80:88:03:48:41
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0: <SiS 5571 USB controller> mem 0xd3000000-0xd3000fff irq 4 at device 1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xd2800000-0xd2800fff irq 4 at device 1.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pcm0: <SiS 7018> port 0xd000-0xd0ff mem 0xd2000000-0xd2000fff irq 7 at device 1.4 on pci0
pcm0: <Analog Devices AD1881A AC97 Codec>
pci0: <simple comms> at device 1.6 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xde000-0xdefff irq 11 at device 9.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <RF5C476 PCI-CardBus Bridge> irq 11 at device 9.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <base peripheral> at device 9.2 (no driver attached)
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xd0800000-0xd0803fff,0xd1000000-0xd10007ff irq 4 at device 10.0 on pci0
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:03:03:2a:66
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> flags 0x6000 irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
pmtimer0 on isa0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 28615MB <IC25N030ATCS04-0> [58140/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s4a
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
IPv6 packet filtering initialized, logging disabled

--
Hajimu UMEMOTO @ Internet Mutual Aid Society Yokohama, Japan
ume at mahoroba.org  ume at bisd.hitachi.co.jp  ume@{,jp.}FreeBSD.org
http://www.imasy.org/~ume/


More information about the freebsd-mobile mailing list