onion omega2+
Aleksandr Rybalko
ray at ddteam.net
Thu May 11 11:32:57 UTC 2017
BTW, Mike, join us on IRC in EFNet network, channel #bsdmips. There is a
lot of guys who able to help.
2017-05-11 3:24 GMT+03:00 Mike Wolman <mike at wolman.co.uk>:
>
> I have re-read this thread (a few times) and redone a kernel now have
> managed to get u-boot stuff going, calling it a night but I think other
> than the compression bits I think the rest build stuff should be straight
> forward and just a matter of sorting out the root filesystem stuff.
>
> One thing I dont get is why it seems to be ok booting up without debugging
> stuff enabled but when turned on it panics but will have another look as
> maybe it was where I was loading the image file into memory from?
>
> Not sure about the flashing of the on board memory and may get a second
> one as a backup before i attempt that. I wouldnt mind some input on that
> side of things once I have a image file ready to go as Im not too keen on
> bricking the device.
>
> Thanks again for everyones input, I will do some testing once logged in
> as a user and see how it goes as a wifi extender and simpler router before
> having a go with the gpio/spi/iic stuff.
>
> Mike.
>
>
> Testing BULK mode...Identifying a storage device...*
> USB_STORAGE: 1 Storage Device(s) found
> Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
> *
> *
> Reading file "kernel.MT7628_FDT.uImage"
> *
> **
> ******
> ******
> ************************************************************
> ************************************************************
> *******************************************************************
> ****
> *
> FAT: 4491512 Bytes read
> Omega2 # bootm 0x80800000
> ## Booting image at 80800000 ...
> Image Name: FreeBSD
> Image Type: MIPS Linux Kernel Image (uncompressed)
> Data Size: 4491448 Bytes = 4.3 MB
> Load Address: 80001100
> Entry Point: 80001100
> Verifying Checksum ... OK
> OK
> No initrd
> ## Transferring control to Linux (at address 80001100) ...
> ## Giving linux memsize in MB, 128
>
> Starting kernel ...
>
> FDT DTB at: 0x804133c0
> CPU clock: 580MHz
> Timer clock: 290MHz
> UART clock: 40MHz
>
> U-Boot args (from 0 args):
> None
> Environment:
> memsize=128
> initrd_start=0x00000000
> initrd_size=0x0
> flash_start=0x00000000
> flash_size=0x2000000
> entry: mips_init()
> RAM size: 128MB (from FDT)
> Cache info:
> picache_stride = 4096
> picache_loopcount = 16
> pdcache_stride = 4096
> pdcache_loopcount = 8
> max line size = 32
> cpu0: MIPS Technologies processor v85.150
> MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
> L1 i-cache: 4 ways of 512 sets, 32 bytes per line
> L1 d-cache: 4 ways of 256 sets, 32 bytes per line
> L2 cache: disabled
> Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
> Config2=0x80000000
> Config3=0x2420<ULRI>
> Config7=0x80010400<WII,AR>
> Physical memory chunk(s):
> 0x47b000 - 0x7ffffff, 129519616 bytes (31621 pages)
> Maxmem is 0x8000000
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2017 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 12.0-CURRENT #0 r317887M: Wed May 10 20:49:10 UTC 2017
> mike at f64-current.mw.office:/usr/home/mike/omega2/obj/mipsel_
> ap/mips.mipsel/usr/home/mike/omega2/src/sys/MT7628_FDT mips
> gcc version 4.2.1 20070831 patched [FreeBSD]
> Preloaded elf kernel "kernel" at 0x8046e160.
> real memory = 134217728 (131072K bytes)
> Physical memory chunk(s):
> 0x0050f000 - 0x07d9ffff, 126423040 bytes (30865 pages)
> avail memory = 125616128 (119MB)
> arc4random: no preloaded entropy cache
> ULE: setup cpu 0
> random: entropy device external interface
> mem: <memory>
> null: <full device, null device, zero device>
> openfirm: <Open Firmware control device>
> nexus0: <MIPS32 root nexus>
> random: harvesting attach, 8 bytes (4 bits) from nexus0
> ofwbus0: <Open Firmware Device Tree> on nexus0
> palmbus0: <MTK Palmbus> mem 0x10000000-0x101fffff on ofwbus0
> simplebus0: <Flattened device tree simple bus> mem 0x600-0x6ff irq 10 on
> palmbus0
> random: harvesting attach, 8 bytes (4 bits) from simplebus0
> random: harvesting attach, 8 bytes (4 bits) from palmbus0
> random: harvesting attach, 8 bytes (4 bits) from ofwbus0
> cpupic0: <MIPS32 Interrupt Controller> on ofwbus0
> random: harvesting attach, 8 bytes (4 bits) from cpupic0
> sysc0: <MTK System Controller> mem 0-0xff on palmbus0
> random: harvesting attach, 8 bytes (4 bits) from sysc0
> pinctrl0: <MTK Pin Controller> on ofwbus0
> pinctrl0: GPIO mode start: 0x54054404
> Processing 1 pin-config node(s) in pinctrl-0 for i2c at 900
> Processing 2 pin-config node(s) in pinctrl-0 for spi at b00
> Processing 1 pin-config node(s) in pinctrl-0 for uartlite at c00
> Processing 1 pin-config node(s) in pinctrl-0 for uart1 at d00
> Processing 1 pin-config node(s) in pinctrl-0 for uart2 at e00
> Processing 2 pin-config node(s) in pinctrl-0 for pwm at 5000
> Processing 1 pin-config node(s) in pinctrl-0 for pinctrl
> Processing 1 pin-config node(s) in pinctrl-0 for sdhci at 10130000
> pinctrl0: GPIO mode end : 0x50054044
> random: harvesting attach, 8 bytes (4 bits) from pinctrl0
> rstctrl0: <MTK Reset Controller> on ofwbus0
> random: harvesting attach, 8 bytes (4 bits) from rstctrl0
> clkctrl0: <MTK Clock Controller> on ofwbus0
> random: harvesting attach, 8 bytes (4 bits) from clkctrl0
> intc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff irq 8 on palmbus0
> random: harvesting attach, 8 bytes (4 bits) from intc0
> gpio0: <MTK GPIO Controller (v2)> mem 0-0xff irq 17 on simplebus0
> gpiobus0: <OFW GPIO bus> on gpio0
> random: harvesting attach, 8 bytes (4 bits) from gpiobus0
> random: harvesting attach, 8 bytes (4 bits) from gpio0
> gpio1: <MTK GPIO Controller (v2)> mem 0-0xff irq 18 on simplebus0
> gpiobus1: <OFW GPIO bus> on gpio1
> random: harvesting attach, 8 bytes (4 bits) from gpiobus1
> random: harvesting attach, 8 bytes (4 bits) from gpio1
> gpio2: <MTK GPIO Controller (v2)> mem 0-0xff irq 19 on simplebus0
> gpiobus2: <OFW GPIO bus> on gpio2
> random: harvesting attach, 8 bytes (4 bits) from gpiobus2
> random: harvesting attach, 8 bytes (4 bits) from gpio2
> cpulist0: <Open Firmware CPU Group> on ofwbus0
> random: harvesting attach, 8 bytes (4 bits) from cpulist0
> palmbus0: <watchdog at 120> mem 0x120-0x12f irq 7 compat ralink,mt7628an-wdt
> (no driver attached)
> palmbus0: <memc at 300> mem 0x300-0x3ff irq 9 compat ralink,mt7620a-memc (no
> driver attached)
> gpioc0: <GPIO controller> on gpio0
> random: harvesting attach, 8 bytes (4 bits) from gpioc0
> gpioc1: <GPIO controller> on gpio1
> random: harvesting attach, 8 bytes (4 bits) from gpioc1
> gpioc2: <GPIO controller> on gpio2
> random: harvesting attach, 8 bytes (4 bits) from gpioc2
> palmbus0: <i2c at 900> mem 0x900-0x9ff compat mediatek,mt7628-i2c (no driver
> attached)
> palmbus0: <i2s at a00> mem 0xa00-0xaff irq 11 disabled compat
> ralink,mt7620a-i2s (no driver attached)
> spi0: <MTK SPI Controller (v2)> mem 0xb00-0xbff on palmbus0
> spibus0: <OFW SPI bus> on spi0
> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
> mx25l0: mx25ll256, sector 65536 bytes, 512 sectors
> random: harvesting attach, 8 bytes (4 bits) from mx25l0
> spibus0: <unknown card> at cs 1 mode 0
> random: harvesting attach, 8 bytes (4 bits) from spibus0
> random: harvesting attach, 8 bytes (4 bits) from spi0
> uart0: <Non-standard ns8250 class UART with FIFOs> mem 0xc00-0xcff irq 12
> on palmbus0
> uart0: console (119047,n,8,1)
> uart0: fast interrupt
> uart0: PPS capture mode: DCD
> random: harvesting attach, 8 bytes (4 bits) from uart0
> uart1: <Non-standard ns8250 class UART with FIFOs> mem 0xd00-0xdff irq 13
> on palmbus0
> uart1: fast interrupt
> uart1: PPS capture mode: DCD
> random: harvesting attach, 8 bytes (4 bits) from uart1
> uart2: <Non-standard ns8250 class UART with FIFOs> mem 0xe00-0xeff irq 14
> on palmbus0
> uart2: fast interrupt
> uart2: PPS capture mode: DCD
> random: harvesting attach, 8 bytes (4 bits) from uart2
> palmbus0: <pwm at 5000> mem 0x5000-0x5fff compat mediatek,mt7628-pwm (no
> driver attached)
> palmbus0: <pcm at 2000> mem 0x2000-0x27ff irq 15 disabled compat
> ralink,mt7620a-pcm (no driver attached)
> palmbus0: <gdma at 2800> mem 0x2800-0x2fff irq 16 compat ralink,mt7620a-gdma
> (no driver attached)
> usbphy0: <MTK USB PHY> mem 0x10120000-0x10123fff on ofwbus0
> random: harvesting attach, 8 bytes (4 bits) from usbphy0
> ofwbus0: <sdhci at 10130000> mem 0x10130000-0x10133fff irq 0 compat
> ralink,mt7620-sdhci (no driver attached)
> ehci0: <MTK USB 2.0 Controller> mem 0x101c0000-0x101c0fff irq 1 on ofwbus0
> usbus0: EHCI version 1.0
> usbus0 on ehci0
> ehci0: usbpf: Attached
> random: harvesting attach, 8 bytes (4 bits) from usbus0
> random: harvesting attach, 8 bytes (4 bits) from ehci0
> ohci0: <MTK USB Controller> mem 0x101c1000-0x101c1fff irq 2 on ofwbus0
> usbus1 on ohci0
> ohci0: usbpf: Attached
> random: harvesting attach, 8 bytes (4 bits) from usbus1
> random: harvesting attach, 8 bytes (4 bits) from ohci0
> rt0: <Ralink RT5350 onChip Ethernet driver> mem 0x10100000-0x1010ffff irq
> 3 on ofwbus0
> rt0: RT5350 Ethernet MAC (rev 0x00000000)
> rt0: use hardcoded 00:18:e7:d5:83:90 macaddr
> rt0: bpf attached
> rt0: Ethernet address: 00:18:e7:d5:83:90
> random: harvesting attach, 8 bytes (4 bits) from rt0
> mtkswitch0: <MTK Switch Driver> mem 0x10110000-0x10117fff irq 4 on ofwbus0
> miibus0: <MII bus> on mtkswitch0
> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
> ukphy0: OUI 0x0017a5, model 0x0001, rev. 0
> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> random: harvesting attach, 8 bytes (4 bits) from ukphy0
> random: harvesting attach, 8 bytes (4 bits) from miibus0
> miibus1: <MII bus> on mtkswitch0
> ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
> ukphy1: OUI 0x0017a5, model 0x0001, rev. 0
> ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> random: harvesting attach, 8 bytes (4 bits) from ukphy1
> random: harvesting attach, 8 bytes (4 bits) from miibus1
> miibus2: <MII bus> on mtkswitch0
> ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
> ukphy2: OUI 0x0017a5, model 0x0001, rev. 0
> ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> random: harvesting attach, 8 bytes (4 bits) from ukphy2
> random: harvesting attach, 8 bytes (4 bits) from miibus2
> miibus3: <MII bus> on mtkswitch0
> ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
> ukphy3: OUI 0x0017a5, model 0x0001, rev. 0
> ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> random: harvesting attach, 8 bytes (4 bits) from ukphy3
> random: harvesting attach, 8 bytes (4 bits) from miibus3
> miibus4: <MII bus> on mtkswitch0
> ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
> ukphy4: OUI 0x0017a5, model 0x0001, rev. 0
> ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> random: harvesting attach, 8 bytes (4 bits) from ukphy4
> random: harvesting attach, 8 bytes (4 bits) from miibus4
> etherswitch0: <Switch controller> on mtkswitch0
> random: harvesting attach, 8 bytes (4 bits) from etherswitch0
> mdio0: <MDIO> on mtkswitch0
> random: harvesting attach, 8 bytes (4 bits) from mdio0
> random: harvesting attach, 8 bytes (4 bits) from mtkswitch0
> ofwbus0: <pcie at 10140000> mem 0x10140000-0x1014ffff irq 5 disabled type
> pci compat mediatek,mt7628-pci (no driver attached)
> ofwbus0: <wmac at 10300000> mem 0x10300000-0x103fffff irq 6 compat
> mediatek,mt7628-wmac (no driver attached)
> gpioled0: <GPIO LEDs> on ofwbus0
> random: harvesting attach, 8 bytes (4 bits) from gpioled0
> ofwbus0: <gpio-keys-polled> compat gpio-keys-polled (no driver attached)
> clock0: <Generic MIPS32 ticker> on nexus0
> Timecounter "MIPS32" frequency 290000000 Hz quality 800
> Event timer "MIPS32" frequency 290000000 Hz quality 800
> random: harvesting attach, 8 bytes (4 bits) from clock0
> Device configuration finished.
> Timecounters tick every 10.000 msec
> lo0: bpf attached
> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 2048
> mtkswitch0port0: link state changed to DOWN
> mtkswitch0port1: link state changed to DOWN
> mtkswitch0port2: link state changed to DOWN
> mtkswitch0port3: link state changed to DOWN
> mtkswitch0port4: link state changed to DOWN
> GEOM: new disk flash/spi0
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 12Mbps Full Speed USB v1.0
> flash/spi0: slice 00000000-0002ffff: u-boot (191KB)
> flash/spi0: slice 00030000-0003ffff: u-boot-env (63KB)
> flash/spi0: slice 00040000-0004ffff: factory (63KB)
> flash/spi0: slice 00050000-01ffffff: firmware (32447KB)
> ugen1.1: <MediaTek OHCI root HUB> at usbus1
> uhub0: <MediaTek OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen0.1: <MediaTek EHCI root HUB> at usbus0
> uhub1: <MediaTek EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> Trying to mount root from ufs:md0.uzip []...
> Root mount waiting for: usbus1 usbus0
> uhub0: 1 port with 1 removable, self powered
> random: harvesting attach, 8 bytes (4 bits) from uhub0
> uhub1: 1 port with 1 removable, self powered
> random: harvesting attach, 8 bytes (4 bits) from uhub1
> ugen1.2: <vendor 0x1005 USB Flash Drive> at usbus1
> umass0 on uhub0
> umass0: <vendor 0x1005 USB Flash Drive, class 0/0, rev 2.00/1.00, addr 2>
> on usbus1
> umass0:0:0: Attached to scbus0
> random: harvesting attach, 8 bytes (4 bits) from umass0
> mountroot: waiting for device md0.uzip...
> (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
> pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
> pass0: <USB Flash Drive 2.04> Removable Direct Access SCSI device
> pass0: Serial Number 070B00012340350
> pass0: 1.000MB/s transfers
> GEOM: new disk da0
> da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
> da0: <USB Flash Drive 2.04> Removable Direct Access SCSI device
> da0: Serial Number 070B00012340350
> da0: 1.000MB/s transfers
> da0: 495MB (1015805 512 byte sectors)
> da0: quirks=0x2<NO_6_BYTE>
> da0: Delete methods: <NONE(*),ZERO>
> (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL not supported.
> Mounting from ufs:md0.uzip failed with error 19.
>
> Loader variables:
>
> Manual root filesystem specification:
> <fstype>:<device> [options]
> Mount <device> using filesystem <fstype>
> and with the specified (optional) option list.
>
> eg. ufs:/dev/da0s1a
> zfs:tank
> cd9660:/dev/cd0 ro
> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
>
> ? List valid disk boot devices
> . Yield 1 second (for background tasks)
> <empty line> Abort manual input
>
> mountroot>
>
>
--
WBW
-------
Rybalko Aleksandr <ray at ddteam.net>
More information about the freebsd-mips
mailing list