onion omega2+
Mike Wolman
mike at wolman.co.uk
Tue May 9 13:01:31 UTC 2017
No joy
Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
*
*
Reading file "kernel.MT7628_FDT.uImage"
*
**
**
**
**
**
**
**
**
**
**
******
******
******************************************************************************************************************************************************************************************************************
****
*
FAT: 5654824 Bytes read
Omega2 # bootm
## Booting image at 80100000 ...
Bad Magic Number,CE6AE7C4
I am going to get a different usb memory stick and rebuild the kernel
later on as i got an error when last writing to the usb memory key and
its quite old now so just want to eliminate it from testing.
On 09/05/2017 13:52, Mori Hiroki wrote:
> Hi.
>
> This is my sample operation get image from network and boot.
>
> RT3052 # tftpboot 0x80800000 Planex_MZK-WNH_kernel.kbin.oldlzma.uboot
> RT3052 # bootm
>
>
> I don't use USB support U-Boot. But I think fatload command argument is
> temporary memory address not kernel address.
>
> How about this.
>
> Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
> Omega2 # bootm
>
> ----- Original Message -----
>> From: Mike Wolman <mike at wolman.co.uk>
>> To: Aleksandr Rybalko <ray at ddteam.net>; Mori Hiroki <yamori813 at yahoo.co.jp>
>> Cc: "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
>> Date: 2017/5/9, Tue 20:48
>> Subject: Re: onion omega2+
>>
>>
>>
>>
>> Is it possible to exclude the compression of the kernel/image for
> now eg:
>> mkimage -A mips -C none -O linux -T kernel -a 0x80001000 -e
> 0x80001100 -n "FreeBSD" -d kernel.MT7628_FDT
> kernel.MT7628_FDT.uImage
>>
>> I have just tried the above but when booting I get a Bad Magic
> Number.
>>
>> Omega2 # fatload usb 0:1 0x80001000 kernel.MT7628_FDT.uImage
>> *
>> *
>> Reading file "kernel.MT7628_FDT.uImage"
>> *
>> **
>> **
>> **
>> **
>> **
>> **
>> **
>> **
>> **
>> **
>> ******
>> ******
>> ******************************************************************************************************************************************************************************************************************
>> ****
>> *
>> FAT: 5654824 Bytes read
>> Omega2 # bootm 0x80001100
>> ## Booting image at 80001100 ...
>> Bad Magic Number,1C994480
>> Omega2 #
>>
>>
>> I have seen other examples starting a program directly with going to
> the address but this didnt work either:
>> Omega2 # go 0x80001100
>> ## Starting application at 0x80001100 ...
>>
>> omega freezes here.
>>
>>
>>
>>
>> On 09/05/2017 10:12, Aleksandr Rybalko wrote:
>>
>> Fix things in order :)
> Currently you have problem with LZMA, serial port later.
>>>
> So, find version of lzma used to build linux firmware, MIPS routers world use about 5 incompatible versions. One of them, you can find here:
>>> http://project.zrouter.org/hg/zrouter/file/9ac53695a44d/tools/oldlzma
>>>
>>>
>>>
>>>
>>> 2017-05-09 7:03 GMT+03:00 Mori Hiroki <yamori813 at yahoo.co.jp>:
>>>
>>> Hi Mike
>>>> Could you show u-boot printenv command result.
>>>>
>>>> Thanks
>>>>
>>>>
>>>> ----- Original Message -----
>>>>> From: Mike Wolman <mike at wolman.co.uk>
>>>>> To: Mori Hiroki <yamori813 at yahoo.co.jp>; "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
>>>>> Cc:
>>>>> Date: 2017/5/9, Tue 10:30
>>>>> Subject: Re: onion omega2+
>>>>>
>>>>> Hi Mori,
>>>>>
>>>>> When I compiled the world/kernel etc I used:
>>>>>
>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT
>>>>> ../freebsd-wifi-build/build/ bin/build ralink
> buildkernel
>>>>> I checked the serial stuff was the same as the
> other configs in:
>>>>> https://github.com/freebsd/ freebsd-wifi-build/
>>>>> and they looked the same.
>>>>>
>>>>> The OMEGA2.dtsi file has:
>>>>>
>>>>> chosen {
>>>>> bootargs = "console=ttyS0,115200";
>>>>> };
>>>>>
>>>>>
>>>>> And mt7628an.dtsi has: serial0 = &uartlite;
>>>>>
>>>>> I dont think im getting as far as worrying about
> the serial console at
>>>>> the moment and need to get the kernel to uncompress
> first.
>>>>> Mike.
>>>>>
>>>>>
>>>>> On 09/05/2017 02:20, Mori Hiroki wrote:
>>>>>> Hi Mike
>>>>>>
>>>>>> In FreeBSD is use serial0 dts item to console.
>>>>>>
>>>>>> I think good to use this at start.
>>>>>>
>>>>>> freebsd/sys/gnu/dts/mips/ MT7628.dts
>>>>>>
>>>>>> ----- Original Message -----
>>>>>>> From: Mike Wolman <mike at wolman.co.uk>
>>>>>>> To: Mori Hiroki <yamori813 at yahoo.co.jp>;
>>>>> "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
>>>>>>> Cc:
>>>>>>> Date: 2017/5/9, Tue 09:25
>>>>>>> Subject: Re: onion omega2+
>>>>>>>
>>>>>>> Hi Mori,
>>>>>>>
>>>>>>> I grabbed the dts files from:
>>>>>>>
>>>>>>> https://github.com/WereCatf/ source/tree/image/target/ linux/ramips/dts
>>>>>>>
>>>>> https://github.com/WereCatf/ source/blob/image/target/ linux/ramips/dts/OMEGA2P.dts
>>>>> https://github.com/WereCatf/ source/blob/image/target/ linux/ramips/dts/OMEGA2.dtsi
>>>>>>> If this is of any use from the default
> linux install on the flash:
>>>>>>> root at Omega-12BF:/proc# cat /proc/mtd
>>>>>>> dev: size erasesize name
>>>>>>> mtd0: 00030000 00010000 "u-boot"
>>>>>>> mtd1: 00010000 00010000 "u-boot-env"
>>>>>>> mtd2: 00010000 00010000 "factory"
>>>>>>> mtd3: 01fb0000 00010000 "firmware"
>>>>>>> mtd4: 00148842 00010000 "kernel"
>>>>>>> mtd5: 01e677be 00010000 "rootfs"
>>>>>>> mtd6: 01950000 00010000 "rootfs_data"
>>>>>>>
>>>>>>>
>>>>>>> btw after posting i spotted and error in
> what i did with:
>>>>>>> mkimage -A mips -O linux -T kernel -C lzma
> \
>>>>>>> -a 0x80001000 -e 0x80001100 \
>>>>>>> -n "FreeBSD" -d
> kernel.MT7628_FDT.lzma
>>>>>>> kernel.MT7628_FDT.ulzma.uImage
>>>>>>>
>>>>>>> I have redone this using the correct
> compressed kernel ie:
>>>>>>> mkimage -A mips -O linux -T kernel -C lzma
> \
>>>>>>> -a 0x80001000 -e 0x80001100 \
>>>>>>> -n "FreeBSD" -d
> kernel.MT7628_FDT.ulzma
>>>>>>> kernel.MT7628_FDT.ulzma.uImage
>>>>>>>
>>>>>>>
>>>>>>> But this didnt work.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 09/05/2017 01:17, Mori Hiroki wrote:
>>>>>>>> Hi.
>>>>>>>>
>>>>>>>> I think if U-Boot work memory make
> broken then
>>>>>>>> Uncompressing Kernel Image is NG.
>>>>>>>>
>>>>>>>> Some ARM U-Boot is use top address
> in work memory.
>>>>>>>> If this case your kernel start
> address to move to
>>>>>>>> after work memory. But I never see
> in MIPS.
>>>>>>>> And What is set FDT_DTS_FILE in
> your kernel configuration ?
>>>>>>>> ----- Original Message -----
>>>>>>>>
>>>>>>>>> From: Mike Wolman <mike at wolman.co.uk>
>>>>>>>>> To: freebsd-mips at freebsd.org
>>>>>>>>> Cc:
>>>>>>>>> Date: 2017/5/9, Tue 07:48
>>>>>>>>> Subject: Re: onion omega2+
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> More info in case anyone can
> point me in the right direction.
>>>>>>>>> I have found:
>>>>>>>>>
>>>>>>>>> https://forum.openwrt.org/ viewtopic.php?id=53865
>>>>>>>>>
>>>>>>>>> I have tried changing how lzma
> compresses the kernel by
>>>>> adding -d20 to
>>>>>>>>> the build scripts eg:
>>>>>>>>>
>>>>>>>>> /usr/local/bin/lzma e
>>>>>>>>>
>>>>> /home/mike/omega2/src/../root/ mipsel_ap/boot/kernel.MT7628_ FDT/kernel
>>>>>>> \
>>>>>>>>> /home/mike/omega2/src/../ tftpboot/kernel.MT7628_FDT. lzma
> -d20
>>>>>>>>> This did not work.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Looking at the onion omega conf
> I see that it uses mkuzip and
>>>>> not lzma
>>>>>>>>> with the following settings:
>>>>>>>>>
>>>>>>>>> X_FSIMAGE_CMD="mkuzip"
>>>>>>>>> X_FSIMAGE_ARGS="-L -d -s 65536
> -v"
>>>>>>>>> X_FSIMAGE_SUFFIX=".ulzma"
>>>>>>>>>
>>>>>>>>> So tried the following:
>>>>>>>>>
>>>>>>>>> mkuzip -L -d -s 65536 -v -o
> kernel.MT7628_FDT.ulzma
>>>>> kernel.MT7628_FDT
>>>>>>>>> mkimage -A mips -O linux -T
> kernel -C lzma \
>>>>>>>>> -a 0x80001000 -e 0x80001100
> \
>>>>>>>>> -n "FreeBSD" -d
> kernel.MT7628_FDT.lzma
>>>>>>>>> kernel.MT7628_FDT.ulzma.uImage
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> But this did not work either.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 08/05/2017 19:41, Aleksandr
> Rybalko wrote:
>>>>>>>>>> Hi Mike!
>>>>>>>>>>
>>>>>>>>>> I see you have no "OK"
> after
>>>>> "Uncompressing Kernel
>>>>>>> Image
>>>>>>>>> ...", so
>>>>>>>>>> first point uboot
> decompressor fail.
>>>>>>>>>> Why fail? Because you have
> wrong base address in image:
>>>>>>>>>> Load Address: fffffff2
>>>>>>>>>> Entry Point: fffffff2
>>>>>>>>>> MIPS32 machines have RAM
> mapped to 0x80000000 address,
>>>>> so adding
>>>>>>> its
>>>>>>>>>> size, you will get max
> address (if 16MB, it will be
>>>>> 0x81000000),
>>>>>>> but
>>>>>>>>>> you uboot image was
> created with 0xfffffff2.
>>>>>>>>>> Even more, unpacked kernel
> expects it will be called at
>>>>>>> 0x80001100. so
>>>>>>>>>> if you have ELF kernel
> (file with ELF header, like
>>>>> every
>>>>>>> executable)
>>>>>>>>>> that file have to be
> loaded at (0x80001100 -
>>>>> ELF_HEADER_SIZE).
>>>>>>>>>> In most cases it will be
> 0x80001100 - 0x100 =
>>>>> 0x80001000. But
>>>>>>> sometime
>>>>>>>>>> (I did not found why) it
> can be 0x20, you can find it
>>>>> by looking
>>>>>>> at
>>>>>>>>>> .text section in readelf
> -S.
>>>>>>>>>> So if you have kernel with
> entry point 0x80001100 and
>>>>> .text
>>>>>>> segment
>>>>>>>>>> offset 0x100, you have to
> create uboot image with load
>>>>> address
>>>>>>>>>> 0x80001000 and entry point
> 0x80001100.
>>>>>>>>>> If that step successful
> you will get:
>>>>>>>>>> /Uncompressing Kernel
> Image/ ... OK
>>>>>>>>>> Starting kernel ...
>>>>>>>>>>
>>>>>>>>>> Last line mean, uboot did
> jump into kernel code.
>>>>>>>>>> Good luck.
>>>>>>>>>>
>>>>>>>>>> 2017-05-07 18:20 GMT+03:00
> Mike Wolman
>>>>> <mike at wolman.co.uk
>>>>>>>>>> <mailto:mike at wolman.co.uk>>:
>>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> I am trying to get
> FreeBSD working on this board -
>>>>> I think I
>>>>>>> am
>>>>>>>>>> almost there in
> getting it working but need some
>>>>> help please.
>>>>>>>>>> I have followed
> instructions from the
>>>>> freebsd-wifi-build and
>>>>>>>>>> *think* I have got
> everything correct - I am trying
>>>>> to do
>>>>>>> this on
>>>>>>>>>> a CURRENT setup:
>>>>>>>>>>
>>>>>>>>>> FreeBSD
> f64-current.mw.office 12.0-CURRENT FreeBSD
>>>>>>> 12.0-CURRENT #0
>>>>>>>>>> r317887: Sun May 7
> 03:20:34 UTC 2017
>>>>>>>>>>
>>>>>>> mike at f64-current.mw.office:/ usr/obj/usr/src/sys/GENERIC- NODEBUG amd64
>>>>>>>>>> $ cat
> ~/.freebsd-wifi-build- settings.cfg
>>>>>>>>>> X_SKIP_MORE_STUFF=YES
>>>>>>>>>>
> X_EXTRA_SRC_CONF=~/omega2/src. conf
>>>>>>>>>> $ cat
> ~/omega2/src.conf
>>>>>>>>>> WITHOUT_CLANG=YES
>>>>>>>>>> WITHOUT_CLANG_FULL=YES
>>>>>>>>>>
>>>>>>>>>> get dts files from
> thread
>>>>>>>>>>
>>>>> http://community.onion.io/ topic/1099/openwrt-on-the- omega-2/8
>>>>>>>>>>
>>>>>>> <http://community.onion.io/ topic/1099/openwrt-on-the- omega-2/8>
>>>>>>>>>> cd
> ~/omega2/src/sys/gnu/dts/mips
>>>>>>>>>> fetch
>>>>>>>>>>
>>>>> https://raw.githubusercontent. com/WereCatf/source/image/ target/linux/ramips/dts/ OMEGA2.dtsi
>>>>>>>>>>
>>>>> <https://raw. githubusercontent.com/ WereCatf/source/image/target/ linux/ramips/dts/OMEGA2.dtsi>
>>>>>>>>>> fetch
>>>>>>>>>>
>>>>> https://raw.githubusercontent. com/WereCatf/source/image/ target/linux/ramips/dts/ OMEGA2.dts
>>>>>>>>>>
>>>>> <https://raw. githubusercontent.com/ WereCatf/source/image/target/ linux/ramips/dts/OMEGA2.dts>
>>>>>>>>>> fetch
>>>>>>>>>>
>>>>> https://raw.githubusercontent. com/WereCatf/source/image/ target/linux/ramips/dts/ OMEGA2P.dts
>>>>>>>>>>
>>>>> <https://raw. githubusercontent.com/ WereCatf/source/image/target/ linux/ramips/dts/OMEGA2P.dts>
>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
> KERNCONF=MT7628_FDT
>>>>>>>>>>
> ../freebsd-wifi-build/build/ bin/build ralink
>>>>> buildworld
>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
> KERNCONF=MT7628_FDT
>>>>>>>>>>
> ../freebsd-wifi-build/build/ bin/build ralink
>>>>> buildkernel
>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
> KERNCONF=MT7628_FDT
>>>>>>>>>>
> ../freebsd-wifi-build/build/ bin/build ralink
>>>>> installworld
>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
> KERNCONF=MT7628_FDT
>>>>>>>>>>
> ../freebsd-wifi-build/build/ bin/build ralink
>>>>> installkernel
>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
> KERNCONF=MT7628_FDT
>>>>>>>>>>
> ../freebsd-wifi-build/build/ bin/build ralink
>>>>> distribution
>>>>>>>>>>
>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
> KERNCONF=MT7628_FDT
>>>>>>>>>>
> ../freebsd-wifi-build/build/ bin/build ralink
>>>>> mfsroot
>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
> KERNCONF=MT7628_FDT
>>>>>>>>>>
> ../freebsd-wifi-build/build/ bin/build ralink
>>>>> fsimage
>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
> KERNCONF=MT7628_FDT
>>>>>>>>>>
> ../freebsd-wifi-build/build/ bin/build ralink uboot
>>>>>>>>>>
>>>>>>>>>> Create flash:
>>>>>>>>>>
>>>>>>>>>>
> X_FLASH=kernel.MT7628_FDT. lzma.flash
>>>>>>>>>> dd if=/dev/zero bs=$((
> 0x200000 )) count=1
>>>>> of=${X_FLASH}
>>>>>>>>>> dd
> if=kernel.MT7628_FDT.lzma. uImage of=${X_FLASH}
>>>>>>> conv=notrunc
>>>>>>>>>> dd if=
> mfsroot-ralink.img.lzma >> ${X_FLASH}
>>>>>>>>>>
>>>>>>>>>> $ readelf -h
> kernel.MT7628_FDT | grep Entry
>>>>>>>>>> Entry point
> address: 0x80001100
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Now on the omega over
> serial - I didnt get the
>>>>> network
>>>>>>> expansion
>>>>>>>>>> doc thing so am doing
> stuff with usb rather than
>>>>> tftp
>>>>>>>>>> I am not 100% sure
> about the 0x80001100 and the
>>>>> fatload and
>>>>>>> have
>>>>>>>>>> tried this
>>>>>>>>>>
>>>>>>>>>> Omega2 # fatload usb
> 0:1 0x80001100
>>>>>>> /kernel.MT7628_FDT.lzma.flash
>>>>>>>>>> *
>>>>>>>>>> *
>>>>>>>>>> Reading file
>>>>> "/kernel.MT7628_FDT.lzma. flash"
>>>>>>>>>> *
>>>>>>>>>> **
>>>>>>>>>> **
>>>>>>>>>> **
>>>>>>>>>> ******
>>>>>>>>>>
>>>>> ****************************** ****************************** ****************************** ****************************** *********************
>>>>>>>>>> ******
>>>>>>>>>> *
>>>>>>>>>> FAT: 2108463 Bytes
> read
>>>>>>>>>> Omega2 # bootm
> 0x80001100
>>>>>>>>>> ## Booting image at
> 80001100 ...
>>>>>>>>>> Image Name:
> FreeBSD
>>>>>>>>>> Image Type: MIPS
> Linux Kernel Image (lzma
>>>>> compressed)
>>>>>>>>>> Data Size:
> 1365122 Bytes = 1.3 MB
>>>>>>>>>> Load Address:
> fffffff2
>>>>>>>>>> Entry Point:
> fffffff2
>>>>>>>>>> Verifying Checksum
> ... OK
>>>>>>>>>> Uncompressing
> Kernel Image ...
>>>>>>>>>>
>>>>>>>>>> At this point nothing
> happens and console hangs -
>>>>> note in
>>>>>>>>>> OMEGA2.dtsithe console
> is set to ttyS0:
>>>>>>>>>> bootargs =
> "console=ttyS0,115200";
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I have also tried with
> just kernel.MT7628_FDT and
>>>>>>>>>> kernel.MT7628_FDT.lzma
> but both fail:
>>>>>>>>>> Omega2 # fatload usb
> 0:1 0x80001100
>>>>>>> /kernel.MT7628_FDT.lzma.uImage
>>>>>>>>>> *
>>>>>>>>>> *
>>>>>>>>>> Reading file
>>>>> "/kernel.MT7628_FDT.lzma. uImage"
>>>>>>>>>> *
>>>>>>>>>> **
>>>>>>>>>> **
>>>>>>>>>> ******
>>>>>>>>>>
>>>>> ****************************** ****************************** ****************************** ****************************** ******
>>>>>>>>>> **********
>>>>>>>>>> *
>>>>>>>>>> FAT: 1365186 Bytes
> read
>>>>>>>>>> Omega2 # bootm
> 0x80001100
>>>>>>>>>> ## Booting image at
> 80001100 ...
>>>>>>>>>> Image Name:
> FreeBSD
>>>>>>>>>> Image Type: MIPS
> Linux Kernel Image (lzma
>>>>> compressed)
>>>>>>>>>> Data Size:
> 1365122 Bytes = 1.3 MB
>>>>>>>>>> Load Address:
> fffffff2
>>>>>>>>>> Entry Point:
> fffffff2
>>>>>>>>>> Verifying Checksum
> ... OK
>>>>>>>>>> Uncompressing
> Kernel Image ...
>>>>>>>>>>
>>>>>>>>>> A few comments on the
> hardware for anyone who wants
>>>>> to get
>>>>>>> one:
>>>>>>>>>> Get the expansion dock
> with serial port access -
>>>>> the power
>>>>>>> dock
>>>>>>>>>> does not provide
> serial access - i think it is
>>>>> possible to
>>>>>>> use an
>>>>>>>>>> ftdi ttl serial
> chip/cable but have not tried.
>>>>>>>>>> Stupidly I forgot this
> only has wifi access so you
>>>>> are not
>>>>>>> able to
>>>>>>>>>> tftp boot this without
> getting the ethernet network
>>>>> expansion
>>>>>>> but
>>>>>>>>>> loading stuff up from
> a usb memory stick is seem
>>>>> fine from
>>>>>>> u-boot.
>>>>>>>>>> I do not think that it
> is possible to boot from the
>>>>> SD card
>>>>>>> on the
>>>>>>>>>> Omega2+ - which is a
> shame.
>>>>>>>>>> Thanks for reading,
>>>>>>>>>>
>>>>>>>>>> Mike.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
> ______________________________ _________________
>>>>>>>>>> freebsd-mips at freebsd.org
>>>>>>> <mailto:freebsd-mips at freebsd. org>mailing
>>>>>>>>> list
>>>>>>>>>>
>>>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips
>>>>>>>>>>
>>>>>>> <https://lists.freebsd.org/ mailman/listinfo/freebsd-mips>
>>>>>>>>>> To unsubscribe, send
> any mail to
>>>>>>>>>> "freebsd-mips-unsubscribe@ freebsd.org
>>>>>>>>>>
>>>>> <mailto:freebsd-mips- unsubscribe at freebsd.org>"
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> WBW
>>>>>>>>>> -------
>>>>>>>>>> Rybalko Aleksandr <ray at ddteam.net
>>>>>>> <mailto:ray at ddteam.net>>
>>>>>>>>> ______________________________ _________________
>>>>>>>>> freebsd-mips at freebsd.org mailing list
>>>>>>>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips
>>>>>>>>> To unsubscribe, send any mail to
>>>>>>>>> "freebsd-mips-unsubscribe@ freebsd.org"
>>>>>>>>>
>>>> ______________________________ _________________
>>>> freebsd-mips at freebsd.org mailing list
>>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips
>>>> To unsubscribe, send any mail to "freebsd-mips-unsubscribe@ freebsd.org"
>>>>
>>>
>>> --
>>>
>>> WBW
>>> -------
>>> Rybalko Aleksandr <ray at ddteam.net>
>>>
>>>
>>
>>
More information about the freebsd-mips
mailing list