sys/mips/mediatek kernel crash on RT3050
Mori Hiroki
yamori813 at yahoo.co.jp
Thu Sep 8 03:21:15 UTC 2016
Hi.
I look that patch apply to head. I build and check it. Work fine.
https://gist.github.com/yamori813/5ac99716500c4e7ee47c4db8d403c5b7
Thanks
Hiroki Mori
----- Original Message -----
> From: Stanislav Galabov <sgalabov at gmail.com>
> To: Mori Hiroki <yamori813 at yahoo.co.jp>
> Cc: Stanislav Galabov <sgalabov at gmail.com>; Adrian Chadd <adrian.chadd at gmail.com>; "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
> Date: 2016/8/29, Mon 18:09
> Subject: Re: sys/mips/mediatek kernel crash on RT3050
>
> Hi,
>
> Could you please test after applying the patch found at:
> https://reviews.freebsd.org/D7692
>
> Best wishes,
> Stanislav
>
>> On Aug 29, 2016, at 06:07, Mori Hiroki <yamori813 at yahoo.co.jp> wrote:
>>
>> Hi
>>
>> I build for BCM box at sys/mips/brodecom today.
>>
>> This build have same panic.
>>
>> CFE> boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:
>> Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
>> Loading: ........... 3446116 bytes read
>> Entry at 0x80001000
>> Closing network.
>> Starting program at 0x80001000
>> entry: mips_init()
>> Cache info:
>> picache_stride = 4096
>> picache_loopcount = 4
>> pdcache_stride = 4096
>> pdcache_loopcount = 4
>> cpu0: Broadcom processor v41.144
>> MMU: Standard TLB, 32 entries (1K 4K 16K 64K 256K 1M 16M 64M 256M pg
> sizes)
>> L1 i-cache: 4 ways of 256 sets, 16 bytes per line
>> L1 d-cache: 2 ways of 512 sets, 16 bytes per line
>> L2 cache: disabled
>> Config1=0x3e9b6c86<MIPS16,EJTAG>
>> KDB: debugger backends: ddb
>> KDB: current backend: ddb
>> Copyright (c) 1992-2016 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>> The Regents of the University of California. All rights reserved.
>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>> FreeBSD 12.0-CURRENT #3 7c2f7cf(zrouter)-dirty: Mon Aug 29 11:41:45 JST
> 2016
>>
> hiroki at microserver:/storage/home/hiroki/obj/storage/home/hiroki/zrouter/tmp/
>> mips.mipsel/storage/home/hiroki/freebsd/sys/Buffalo_WHR-HP-G54 mips
>> gcc version 4.2.1 20070831 patched [FreeBSD]
>> real memory = 16125952 (15748K bytes)
>> avail memory = 11137024 (10MB)
>> nexus0: <MIPS32 root nexus>
>> bhnd0: <BCM5354 SIBA bus> at mem 0x18000000-0x180fffff on nexus0
>> bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 20> mem
> 0x18000000-0x18000
>> dff,0x1fc00000-0x1fffffff,0x1c000000-0x1dffffff,0x1a000000-0x1bffffff at
> core 0
>> on bhnd0
>> bhnd_mips0: <Broadcom MIPS3302 Core, rev 8> mem 0x18002000-0x18002dff
> at core 2
>> on bhnd0
>> cpupic0: <MIPS32 Interrupt Controller> on nexus0
>> bhnd_pmu0: <Broadcom ChipCommon PMU, rev 0> on bhnd_chipc0
>> bhnd0: error reading BOARDVENDOR: 19
>> bhnd_pmu0: error fetching board info: 19
>> device_attach: bhnd_pmu0 attach returned 6
>> nvram2env0: Found NVRAM at 0x1fc00400
>> nvram2env0: <NVRAM to ENV pseudo-device> on nexus0
>> nvram2env0: sig = 0x48534c46
>> nvram2env0: size = 0x2f0
>> nvram2env1: Found NVRAM at 0x1c7f8000
>> nvram2env1: <NVRAM to ENV pseudo-device> on nexus0
>> nvram2env1: sig = 0x48534c46
>> nvram2env1: size = 0x344
>> clock0: <Generic MIPS32 ticker> on nexus0
>> panic: Unable to add hard IRQ 7 handler
>> KDB: enter: panic
>> [ thread pid 0 tid 100000 ]
>> Stopped at kdb_enter+0x4c: lui at,0x8036
>>
>>
>> ----- Original Message -----
>>> From: Stanislav Galabov <sgalabov at gmail.com>
>>> To: Adrian Chadd <adrian.chadd at gmail.com>
>>> Cc: Mori Hiroki <yamori813 at yahoo.co.jp>;
> "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
>>> Date: 2016/8/26, Fri 01:31
>>> Subject: Re: sys/mips/mediatek kernel crash on RT3050
>>>
>>> Hi all,
>>>
>>> I am currently on vacation and will be back next week. I guess I'll
> find
>>> some time to look at this then if needed.
>>>
>>> Best wishes,
>>> Stanislav
>>>
>>>> On Aug 25, 2016, at 18:25, Adrian Chadd
> <adrian.chadd at gmail.com>
>>> wrote:
>>>>
>>>> Hm, does it require INTRNG these days?
>>>>
>>>>
>>>> -a
>>>>
>>>>
>>>>> On 24 August 2016 at 18:11, Mori Hiroki
> <yamori813 at yahoo.co.jp>
>>> wrote:
>>>>> Hi
>>>>>
>>>>> I build sys/mips/mediatek for RT3050 box at few days before
> head.
>>>>>
>>>>> This kernel crash.
>>>>>
>>>>> This build based on rt3050.dtsi.
>>>>>
>>>>> Some one know this problem ?
>>>>>
>>>>> Thanks.
>>>>>
>>>>> Starting kernel ...
>>>>>
>>>>> FDT DTB at: 0x802ce6f0
>>>>> CPU clock: 320MHz
>>>>> Timer clock: 160MHz
>>>>> UART clock: 106MHz
>>>>>
>>>>> U-Boot args (from 0 args):
>>>>> None
>>>>> Environment:
>>>>> entry: mips_init()
>>>>> RAM size: 32MB (assumed)
>>>>> Cache info:
>>>>> picache_stride = 4096
>>>>> picache_loopcount = 8
>>>>> pdcache_stride = 4096
>>>>> pdcache_loopcount = 4
>>>>> cpu0: MIPS Technologies processor v76.150
>>>>> MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M
> 256M pg
>>> sizes)
>>>>> L1 i-cache: 4 ways of 256 sets, 32 bytes per line
>>>>> L1 d-cache: 4 ways of 128 sets, 32 bytes per line
>>>>> L2 cache: disabled
>>>>> Config1=0xbea3319e<PerfCount,WatchRegs,MIPS16,EJTAG>
>>>>> Config2=0x80000000
>>>>> Config3=0x420
>>>>> Physical memory chunk(s):
>>>>> 0x334000 - 0x1ffffff, 30195712 bytes (7372 pages)
>>>>> Maxmem is 0x2000000
>>>>> Copyright (c) 1992-2016 The FreeBSD Project.
>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
> 1993,
>>> 1994
>>>>> The Regents of the University of California. All rights
>>> reserved.
>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>>>> FreeBSD 12.0-CURRENT #1 ed1832a(zrouter): Sun Aug 21 12:19:54
> JST 2016
>>>>>
>>>
> hiroki at microserver:/storage/home/hiroki/obj/storage/home/hiroki/zrouter/tmp/
>>>>> mips.mipsel/storage/home/hiroki/freebsd/sys/Fon_FON2305E_FDT
> mips
>>>>> gcc version 4.2.1 20070831 patched [FreeBSD]
>>>>> Preloaded elf kernel "kernel" at 0x8032afb0.
>>>>> real memory = 33554432 (32768K bytes)
>>>>> Physical memory chunk(s):
>>>>> 0x003c0000 - 0x01f3efff, 28831744 bytes (7039 pages)
>>>>> avail memory = 28397568 (27MB)
>>>>> ULE: setup cpu 0
>>>>> random: entropy device external interface
>>>>> firmware: 'rt2860fw' version 0: 8192 bytes loaded at
> 0x802d86d0
>>>>> firmware: 'rt2561fw' version 0: 8192 bytes loaded at
> 0x802d2550
>>>>> firmware: 'rt2561sfw' version 0: 8192 bytes loaded at
>>> 0x802d45d0
>>>>> wlan: <802.11 Link Layer>
>>>>> firmware: 'rt2661fw' version 0: 8192 bytes loaded at
> 0x802d6650
>>>>> null: <full device, null device, zero device>
>>>>> openfirm: <Open Firmware control device>
>>>>> mem: <memory>
>>>>> nexus0: <MIPS32 root nexus>
>>>>> random: harvesting attach, 8 bytes (4 bits) from nexus0
>>>>> ofwbus0: <Open Firmware Device Tree> on nexus0
>>>>> palmbus0: <MTK Palmbus> mem 0x10000000-0x101fffff on
> ofwbus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from palmbus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from ofwbus0
>>>>> cpupic0: <MIPS32 Interrupt Controller> on ofwbus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from cpupic0
>>>>> sysc0: <MTK System Controller> mem 0-0xff on palmbus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from sysc0
>>>>> pinctrl0: <MTK Pin Controller> on ofwbus0
>>>>> pinctrl0: GPIO mode start: 0x0000029d
>>>>> Processing 1 pin-config node(s) in pinctrl-0 for spi at b00
>>>>> Processing 1 pin-config node(s) in pinctrl-0 for uartlite at c00
>>>>> Processing 1 pin-config node(s) in pinctrl-0 for pinctrl
>>>>> pinctrl0: GPIO mode end : 0x0000005d
>>>>> random: harvesting attach, 8 bytes (4 bits) from pinctrl0
>>>>> rstctrl0: <MTK Reset Controller> on ofwbus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from rstctrl0
>>>>> clkctrl0: <MTK Clock Controller> on ofwbus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from clkctrl0
>>>>> intc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff
> irq 6 on
>>> palmbus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from intc0
>>>>> gpio0: <MTK GPIO Controller (v1)> mem 0x600-0x633 irq 9
> on
>>> palmbus0
>>>>> gpiobus0: <OFW GPIO bus> on gpio0
>>>>> random: harvesting attach, 8 bytes (4 bits) from gpiobus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from gpio0
>>>>> palmbus0: <timer at 100> mem 0x100-0x11f irq 4 compat
>>> ralink,rt3050-timer (no drive
>>>>> r attached)
>>>>> palmbus0: <watchdog at 120> mem 0x120-0x12f irq 5 compat
>>> ralink,rt3050-wdt (no driv
>>>>> er attached)
>>>>> palmbus0: <memc at 300> mem 0x300-0x3ff irq 7 compat
>>> ralink,rt3050-memc (no driver
>>>>> attached)
>>>>> palmbus0: <uart at 500> mem 0x500-0x5ff irq 8 disabled
> compat
>>> ralink,rt3050-uart (n
>>>>> o driver attached)
>>>>> gpioled0: <GPIO led> at pin 14 on gpiobus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from gpioled0
>>>>> gpioled1: <GPIO led> at pin 11 on gpiobus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from gpioled1
>>>>> gpioled2: <GPIO led> at pin 9 on gpiobus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from gpioled2
>>>>> gpioled3: <GPIO led> at pin 12 on gpiobus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from gpioled3
>>>>> gpioc0: <GPIO controller> on gpio0
>>>>> random: harvesting attach, 8 bytes (4 bits) from gpioc0
>>>>> palmbus0: <gpio at 638> mem 0x638-0x65b disabled compat
>>> ralink,rt3050-gpio (no driv
>>>>> er attached)
>>>>> palmbus0: <gpio at 660> mem 0x660-0x683 disabled compat
>>> ralink,rt3050-gpio (no driv
>>>>> er attached)
>>>>> spi0: <MTK SPI Controller (v1)> mem 0xb00-0xbff on
> palmbus0
>>>>> spibus0: <OFW SPI bus> on spi0
>>>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
>>>>> mx25l0: mx25ll64, sector 65536 bytes, 128 sectors
>>>>> random: harvesting attach, 8 bytes (4 bits) from mx25l0
>>>>> random: harvesting attach, 8 bytes (4 bits) from spibus0
>>>>> random: harvesting attach, 8 bytes (4 bits) from spi0
>>>>> uart0: <MTK UART Controller> mem 0xc00-0xcff irq 10 on
> palmbus0
>>>>> uart0: console (57971,n,8,1)
>>>>> uart0: fast interrupt
>>>>> uart0: PPS capture mode: DCDinvalid
>>>>> random: harvesting attach, 8 bytes (4 bits) from uart0
>>>>> ofwbus0: <usbphy> compat ralink,rt3050-usbphy (no driver
>>> attached)
>>>>> rt0: <Ralink RT3050 onChip Ethernet driver> mem
>>> 0x10100000-0x1010ffff irq 0 on o
>>>>> fwbus0
>>>>> rt0: RT305XF Ethernet MAC (rev 0x00000000)
>>>>> rt0: use hardcoded 00:18:e7:d5:83:90 macaddr
>>>>> rt0: bpf attached
>>>>> rt0: Ethernet address: 00:18:e7:d5:83:90
>>>>> random: harvesting attach, 8 bytes (4 bits) from rt0
>>>>> mtkswitch0: <MTK Switch Driver> mem 0x10110000-0x10117fff
> irq 1
>>> on ofwbus0
>>>>> miibus0: <MII bus> on mtkswitch0
>>>>> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on
> miibus0
>>>>> ukphy0: OUI 0x000c43, model 0x0001, rev. 7
>>>>> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> auto
>>>>> random: harvesting attach, 8 bytes (4 bits) from ukphy0
>>>>> random: harvesting attach, 8 bytes (4 bits) from miibus0
>>>>> miibus1: <MII bus> on mtkswitch0
>>>>> ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on
> miibus1
>>>>> ukphy1: OUI 0x000c43, model 0x0001, rev. 7
>>>>> ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> auto
>>>>> random: harvesting attach, 8 bytes (4 bits) from ukphy1
>>>>> random: harvesting attach, 8 bytes (4 bits) from miibus1
>>>>> miibus2: <MII bus> on mtkswitch0
>>>>> ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on
> miibus2
>>>>> ukphy2: OUI 0x000c43, model 0x0001, rev. 7
>>>>> ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> auto
>>>>> random: harvesting attach, 8 bytes (4 bits) from ukphy2
>>>>> random: harvesting attach, 8 bytes (4 bits) from miibus2
>>>>> miibus3: <MII bus> on mtkswitch0
>>>>> ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on
> miibus3
>>>>> ukphy3: OUI 0x000c43, model 0x0001, rev. 7
>>>>> ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> auto
>>>>> random: harvesting attach, 8 bytes (4 bits) from ukphy3
>>>>> random: harvesting attach, 8 bytes (4 bits) from miibus3
>>>>> miibus4: <MII bus> on mtkswitch0
>>>>> ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on
> miibus4
>>>>> ukphy4: OUI 0x000c43, model 0x0001, rev. 7
>>>>> ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> auto
>>>>> random: harvesting attach, 8 bytes (4 bits) from ukphy4
>>>>> random: harvesting attach, 8 bytes (4 bits) from miibus4
>>>>> etherswitch0: <Switch controller> on mtkswitch0
>>>>> random: harvesting attach, 8 bytes (4 bits) from etherswitch0
>>>>> mdio0: <MDIO> on mtkswitch0
>>>>> random: harvesting attach, 8 bytes (4 bits) from mdio0
>>>>> random: harvesting attach, 8 bytes (4 bits) from mtkswitch0
>>>>> ofwbus0: <wmac at 10180000> mem 0x10180000-0x101bffff irq 2
> compat
>>> ralink,rt3050-wm
>>>>> ac (no driver attached)
>>>>> ofwbus0: <otg at 101c0000> mem 0x101c0000-0x101fffff irq 3
> disabled
>>> compat ralink,r
>>>>> t3050-otg (no driver attached)
>>>>> ofwbus0: <gpio-leds> compat gpio-leds (no driver
> attached)
>>>>> ofwbus0: <gpio-keys-polled> compat gpio-keys-polled (no
> driver
>>> attached)
>>>>> clock0: <Generic MIPS32 ticker> on nexus0
>>>>> panic: Unable to add hard IRQ 7 handler
>>>>> Uptime: 1s
>>>>> Automatic reboot in 15 seconds - press a key on the console to
> abort
>>>>> Rebooting...
>>>>> _______________________________________________
>>>>> freebsd-mips at freebsd.org mailing list
>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
>>>>> To unsubscribe, send any mail to
>>> "freebsd-mips-unsubscribe at freebsd.org"
>>>> _______________________________________________
>>>> freebsd-mips at freebsd.org mailing list
>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
>>>> To unsubscribe, send any mail to
>>> "freebsd-mips-unsubscribe at freebsd.org"
>>>
>
More information about the freebsd-mips
mailing list