sys/mips/mediatek kernel crash on RT3050
Mori Hiroki
yamori813 at yahoo.co.jp
Mon Aug 29 03:10:17 UTC 2016
Hi
I build for BCM box at sys/mips/brodecom today.
This build have same panic.
CFE> boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ........... 3446116 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
entry: mips_init()
Cache info:
picache_stride = 4096
picache_loopcount = 4
pdcache_stride = 4096
pdcache_loopcount = 4
cpu0: Broadcom processor v41.144
MMU: Standard TLB, 32 entries (1K 4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
L1 i-cache: 4 ways of 256 sets, 16 bytes per line
L1 d-cache: 2 ways of 512 sets, 16 bytes per line
L2 cache: disabled
Config1=0x3e9b6c86<MIPS16,EJTAG>
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #3 7c2f7cf(zrouter)-dirty: Mon Aug 29 11:41:45 JST 2016
hiroki at microserver:/storage/home/hiroki/obj/storage/home/hiroki/zrouter/tmp/
mips.mipsel/storage/home/hiroki/freebsd/sys/Buffalo_WHR-HP-G54 mips
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory = 16125952 (15748K bytes)
avail memory = 11137024 (10MB)
nexus0: <MIPS32 root nexus>
bhnd0: <BCM5354 SIBA bus> at mem 0x18000000-0x180fffff on nexus0
bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 20> mem 0x18000000-0x18000
dff,0x1fc00000-0x1fffffff,0x1c000000-0x1dffffff,0x1a000000-0x1bffffff at core 0
on bhnd0
bhnd_mips0: <Broadcom MIPS3302 Core, rev 8> mem 0x18002000-0x18002dff at core 2
on bhnd0
cpupic0: <MIPS32 Interrupt Controller> on nexus0
bhnd_pmu0: <Broadcom ChipCommon PMU, rev 0> on bhnd_chipc0
bhnd0: error reading BOARDVENDOR: 19
bhnd_pmu0: error fetching board info: 19
device_attach: bhnd_pmu0 attach returned 6
nvram2env0: Found NVRAM at 0x1fc00400
nvram2env0: <NVRAM to ENV pseudo-device> on nexus0
nvram2env0: sig = 0x48534c46
nvram2env0: size = 0x2f0
nvram2env1: Found NVRAM at 0x1c7f8000
nvram2env1: <NVRAM to ENV pseudo-device> on nexus0
nvram2env1: sig = 0x48534c46
nvram2env1: size = 0x344
clock0: <Generic MIPS32 ticker> on nexus0
panic: Unable to add hard IRQ 7 handler
KDB: enter: panic
[ thread pid 0 tid 100000 ]
Stopped at kdb_enter+0x4c: lui at,0x8036
----- Original Message -----
> From: Stanislav Galabov <sgalabov at gmail.com>
> To: Adrian Chadd <adrian.chadd at gmail.com>
> Cc: Mori Hiroki <yamori813 at yahoo.co.jp>; "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
> Date: 2016/8/26, Fri 01:31
> Subject: Re: sys/mips/mediatek kernel crash on RT3050
>
> Hi all,
>
> I am currently on vacation and will be back next week. I guess I'll find
> some time to look at this then if needed.
>
> Best wishes,
> Stanislav
>
>> On Aug 25, 2016, at 18:25, Adrian Chadd <adrian.chadd at gmail.com>
> wrote:
>>
>> Hm, does it require INTRNG these days?
>>
>>
>> -a
>>
>>
>>> On 24 August 2016 at 18:11, Mori Hiroki <yamori813 at yahoo.co.jp>
> wrote:
>>> Hi
>>>
>>> I build sys/mips/mediatek for RT3050 box at few days before head.
>>>
>>> This kernel crash.
>>>
>>> This build based on rt3050.dtsi.
>>>
>>> Some one know this problem ?
>>>
>>> Thanks.
>>>
>>> Starting kernel ...
>>>
>>> FDT DTB at: 0x802ce6f0
>>> CPU clock: 320MHz
>>> Timer clock: 160MHz
>>> UART clock: 106MHz
>>>
>>> U-Boot args (from 0 args):
>>> None
>>> Environment:
>>> entry: mips_init()
>>> RAM size: 32MB (assumed)
>>> Cache info:
>>> picache_stride = 4096
>>> picache_loopcount = 8
>>> pdcache_stride = 4096
>>> pdcache_loopcount = 4
>>> cpu0: MIPS Technologies processor v76.150
>>> MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg
> sizes)
>>> L1 i-cache: 4 ways of 256 sets, 32 bytes per line
>>> L1 d-cache: 4 ways of 128 sets, 32 bytes per line
>>> L2 cache: disabled
>>> Config1=0xbea3319e<PerfCount,WatchRegs,MIPS16,EJTAG>
>>> Config2=0x80000000
>>> Config3=0x420
>>> Physical memory chunk(s):
>>> 0x334000 - 0x1ffffff, 30195712 bytes (7372 pages)
>>> Maxmem is 0x2000000
>>> Copyright (c) 1992-2016 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
>>> The Regents of the University of California. All rights
> reserved.
>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>> FreeBSD 12.0-CURRENT #1 ed1832a(zrouter): Sun Aug 21 12:19:54 JST 2016
>>>
> hiroki at microserver:/storage/home/hiroki/obj/storage/home/hiroki/zrouter/tmp/
>>> mips.mipsel/storage/home/hiroki/freebsd/sys/Fon_FON2305E_FDT mips
>>> gcc version 4.2.1 20070831 patched [FreeBSD]
>>> Preloaded elf kernel "kernel" at 0x8032afb0.
>>> real memory = 33554432 (32768K bytes)
>>> Physical memory chunk(s):
>>> 0x003c0000 - 0x01f3efff, 28831744 bytes (7039 pages)
>>> avail memory = 28397568 (27MB)
>>> ULE: setup cpu 0
>>> random: entropy device external interface
>>> firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0x802d86d0
>>> firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0x802d2550
>>> firmware: 'rt2561sfw' version 0: 8192 bytes loaded at
> 0x802d45d0
>>> wlan: <802.11 Link Layer>
>>> firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0x802d6650
>>> null: <full device, null device, zero device>
>>> openfirm: <Open Firmware control device>
>>> mem: <memory>
>>> nexus0: <MIPS32 root nexus>
>>> random: harvesting attach, 8 bytes (4 bits) from nexus0
>>> ofwbus0: <Open Firmware Device Tree> on nexus0
>>> palmbus0: <MTK Palmbus> mem 0x10000000-0x101fffff on ofwbus0
>>> random: harvesting attach, 8 bytes (4 bits) from palmbus0
>>> random: harvesting attach, 8 bytes (4 bits) from ofwbus0
>>> cpupic0: <MIPS32 Interrupt Controller> on ofwbus0
>>> random: harvesting attach, 8 bytes (4 bits) from cpupic0
>>> sysc0: <MTK System Controller> mem 0-0xff on palmbus0
>>> random: harvesting attach, 8 bytes (4 bits) from sysc0
>>> pinctrl0: <MTK Pin Controller> on ofwbus0
>>> pinctrl0: GPIO mode start: 0x0000029d
>>> Processing 1 pin-config node(s) in pinctrl-0 for spi at b00
>>> Processing 1 pin-config node(s) in pinctrl-0 for uartlite at c00
>>> Processing 1 pin-config node(s) in pinctrl-0 for pinctrl
>>> pinctrl0: GPIO mode end : 0x0000005d
>>> random: harvesting attach, 8 bytes (4 bits) from pinctrl0
>>> rstctrl0: <MTK Reset Controller> on ofwbus0
>>> random: harvesting attach, 8 bytes (4 bits) from rstctrl0
>>> clkctrl0: <MTK Clock Controller> on ofwbus0
>>> random: harvesting attach, 8 bytes (4 bits) from clkctrl0
>>> intc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff irq 6 on
> palmbus0
>>> random: harvesting attach, 8 bytes (4 bits) from intc0
>>> gpio0: <MTK GPIO Controller (v1)> mem 0x600-0x633 irq 9 on
> palmbus0
>>> gpiobus0: <OFW GPIO bus> on gpio0
>>> random: harvesting attach, 8 bytes (4 bits) from gpiobus0
>>> random: harvesting attach, 8 bytes (4 bits) from gpio0
>>> palmbus0: <timer at 100> mem 0x100-0x11f irq 4 compat
> ralink,rt3050-timer (no drive
>>> r attached)
>>> palmbus0: <watchdog at 120> mem 0x120-0x12f irq 5 compat
> ralink,rt3050-wdt (no driv
>>> er attached)
>>> palmbus0: <memc at 300> mem 0x300-0x3ff irq 7 compat
> ralink,rt3050-memc (no driver
>>> attached)
>>> palmbus0: <uart at 500> mem 0x500-0x5ff irq 8 disabled compat
> ralink,rt3050-uart (n
>>> o driver attached)
>>> gpioled0: <GPIO led> at pin 14 on gpiobus0
>>> random: harvesting attach, 8 bytes (4 bits) from gpioled0
>>> gpioled1: <GPIO led> at pin 11 on gpiobus0
>>> random: harvesting attach, 8 bytes (4 bits) from gpioled1
>>> gpioled2: <GPIO led> at pin 9 on gpiobus0
>>> random: harvesting attach, 8 bytes (4 bits) from gpioled2
>>> gpioled3: <GPIO led> at pin 12 on gpiobus0
>>> random: harvesting attach, 8 bytes (4 bits) from gpioled3
>>> gpioc0: <GPIO controller> on gpio0
>>> random: harvesting attach, 8 bytes (4 bits) from gpioc0
>>> palmbus0: <gpio at 638> mem 0x638-0x65b disabled compat
> ralink,rt3050-gpio (no driv
>>> er attached)
>>> palmbus0: <gpio at 660> mem 0x660-0x683 disabled compat
> ralink,rt3050-gpio (no driv
>>> er attached)
>>> spi0: <MTK SPI Controller (v1)> mem 0xb00-0xbff on palmbus0
>>> spibus0: <OFW SPI bus> on spi0
>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
>>> mx25l0: mx25ll64, sector 65536 bytes, 128 sectors
>>> random: harvesting attach, 8 bytes (4 bits) from mx25l0
>>> random: harvesting attach, 8 bytes (4 bits) from spibus0
>>> random: harvesting attach, 8 bytes (4 bits) from spi0
>>> uart0: <MTK UART Controller> mem 0xc00-0xcff irq 10 on palmbus0
>>> uart0: console (57971,n,8,1)
>>> uart0: fast interrupt
>>> uart0: PPS capture mode: DCDinvalid
>>> random: harvesting attach, 8 bytes (4 bits) from uart0
>>> ofwbus0: <usbphy> compat ralink,rt3050-usbphy (no driver
> attached)
>>> rt0: <Ralink RT3050 onChip Ethernet driver> mem
> 0x10100000-0x1010ffff irq 0 on o
>>> fwbus0
>>> rt0: RT305XF Ethernet MAC (rev 0x00000000)
>>> rt0: use hardcoded 00:18:e7:d5:83:90 macaddr
>>> rt0: bpf attached
>>> rt0: Ethernet address: 00:18:e7:d5:83:90
>>> random: harvesting attach, 8 bytes (4 bits) from rt0
>>> mtkswitch0: <MTK Switch Driver> mem 0x10110000-0x10117fff irq 1
> on ofwbus0
>>> miibus0: <MII bus> on mtkswitch0
>>> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
>>> ukphy0: OUI 0x000c43, model 0x0001, rev. 7
>>> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>>> random: harvesting attach, 8 bytes (4 bits) from ukphy0
>>> random: harvesting attach, 8 bytes (4 bits) from miibus0
>>> miibus1: <MII bus> on mtkswitch0
>>> ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
>>> ukphy1: OUI 0x000c43, model 0x0001, rev. 7
>>> ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>>> random: harvesting attach, 8 bytes (4 bits) from ukphy1
>>> random: harvesting attach, 8 bytes (4 bits) from miibus1
>>> miibus2: <MII bus> on mtkswitch0
>>> ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
>>> ukphy2: OUI 0x000c43, model 0x0001, rev. 7
>>> ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>>> random: harvesting attach, 8 bytes (4 bits) from ukphy2
>>> random: harvesting attach, 8 bytes (4 bits) from miibus2
>>> miibus3: <MII bus> on mtkswitch0
>>> ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
>>> ukphy3: OUI 0x000c43, model 0x0001, rev. 7
>>> ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>>> random: harvesting attach, 8 bytes (4 bits) from ukphy3
>>> random: harvesting attach, 8 bytes (4 bits) from miibus3
>>> miibus4: <MII bus> on mtkswitch0
>>> ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
>>> ukphy4: OUI 0x000c43, model 0x0001, rev. 7
>>> ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>>> random: harvesting attach, 8 bytes (4 bits) from ukphy4
>>> random: harvesting attach, 8 bytes (4 bits) from miibus4
>>> etherswitch0: <Switch controller> on mtkswitch0
>>> random: harvesting attach, 8 bytes (4 bits) from etherswitch0
>>> mdio0: <MDIO> on mtkswitch0
>>> random: harvesting attach, 8 bytes (4 bits) from mdio0
>>> random: harvesting attach, 8 bytes (4 bits) from mtkswitch0
>>> ofwbus0: <wmac at 10180000> mem 0x10180000-0x101bffff irq 2 compat
> ralink,rt3050-wm
>>> ac (no driver attached)
>>> ofwbus0: <otg at 101c0000> mem 0x101c0000-0x101fffff irq 3 disabled
> compat ralink,r
>>> t3050-otg (no driver attached)
>>> ofwbus0: <gpio-leds> compat gpio-leds (no driver attached)
>>> ofwbus0: <gpio-keys-polled> compat gpio-keys-polled (no driver
> attached)
>>> clock0: <Generic MIPS32 ticker> on nexus0
>>> panic: Unable to add hard IRQ 7 handler
>>> Uptime: 1s
>>> Automatic reboot in 15 seconds - press a key on the console to abort
>>> Rebooting...
>>> _______________________________________________
>>> freebsd-mips at freebsd.org mailing list
>>> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
>>> To unsubscribe, send any mail to
> "freebsd-mips-unsubscribe at freebsd.org"
>> _______________________________________________
>> freebsd-mips at freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
>> To unsubscribe, send any mail to
> "freebsd-mips-unsubscribe at freebsd.org"
>
More information about the freebsd-mips
mailing list