Kernel config for TPLink TL WDR3600

Piotr Kubaj pkubaj at riseup.net
Thu Oct 8 19:04:10 UTC 2015


On 10/08/2015 17:47, Adrian Chadd wrote:
> I'll go try reflashing my tl-wr1043nd v1 today.
> 
> Which instrucitons are you following?
> 
> 
> a
> 
> 
> On 7 October 2015 at 21:52, Piotr Kubaj <pkubaj at riseup.net> wrote:
>> On 10/08/2015 06:47, Piotr Kubaj wrote:
>>> On 10/07/2015 20:08, Adrian Chadd wrote:
>>>> Hi,
>>>>
>>>> Just run -HEAD, or be prepared to MFC everything in the mips code and
>>>> wifi stack/drivers to stable/10.
>>>>
>>>> -HEAD works fine. You should just try it. :)
>>>>
>>>>
>>>>
>>>> -adrian
>>>>
>>>>
>>>> On 7 October 2015 at 02:18, Eugene Grosbein <eugen at grosbein.net> wrote:
>>>>> On 07.10.2015 14:57, Piotr Kubaj wrote:
>>>>>> @eugen
>>>>>> You could just copy//WDR3600's kernel config to sys/misc/conf in stable/10. It's quite possible that it will work.
>>>>>
>>>>> I made diff between stable/10 and head for MIPS-related source files
>>>>> and there are lots of non-trivial (for me) changes in head.
>>>>>
>>>>> I will create virtual machine with VBox and build head there
>>>>> as I do not run head on my desktop but 10.2
>>>>>
>>>>>
>>> I've tried to upgrade my 1043nd to HEAD but it caused me just problems :P
>>>
>>>
>>> Is this error known?
>>>
>>>
>>> start_init: trying /sbin/init
>>> rtl8366rb0port0: link state changed to UP
>>> init died (signal 0, exit 1)
>>> panic: Going nowhere without my init!
>>> KDB: enter: panic
>>> [ thread pid 1 tid 100001 ]
>>> Stopped at      kdb_enter+0x4c: lui     at,0x804b
>>> db> bt
>>> Tracing pid 1 tid 100001 td 0x8064b000
>>> db_trace_thread+30 (?,?,?,?) ra c736b8a000000018 sp 0 sz 0
>>> 80088bf4+114 (0,?,ffffffff,?) ra c736b8b800000020 sp 100000000 sz 1
>>> 80088000+388 (?,?,?,?) ra c736b8d8000000a8 sp 0 sz 0
>>> db_command_loop+70 (?,?,?,?) ra c736b98000000018 sp 0 sz 0
>>> 8008ab08+f4 (?,?,?,?) ra c736b998000001a8 sp 0 sz 0
>>> kdb_trap+110 (?,?,?,?) ra c736bb4000000030 sp 0 sz 0
>>> trap+c7c (?,?,?,?) ra c736bb70000000c0 sp 0 sz 0
>>> MipsKernGenException+134 (0,0,0,0) ra c736bc30000000c8 sp 100000001 sz 1
>>> kdb_enter+4c (?,?,?,?) ra c736bcf800000018 sp 0 sz 0
>>> vpanic+ec (?,?,?,?) ra c736bd1000000020 sp 0 sz 0
>>> panic+20 (?,0,0,0) ra c736bd3000000020 sp 1 sz 1
>>> exit1+6c (?,?,?,?) ra c736bd5000000058 sp 0 sz 0
>>> sys_sys_exit+14 (?,?,?,?) ra c736bda800000018 sp 0 sz 0
>>> trap+7a8 (?,?,?,?) ra c736bdc0000000c0 sp 0 sz 0
>>> MipsUserGenException+10c (?,?,?,4093bea0) ra c736be8000000000 sp 0 sz 0
>>> pid 1
>>>
>>>
>>>
>>>
>>>
>>> I'm not sure if that matters but I have 64 MB RAM, so I have changed
>>> AR71XX_REALMEM to 64*1024*1024.
>>>
>> I've noticed that higher in the logs there is:
>> MAP: No valid partition found at map/rootfs.uncompress
>>
https://github.com/freebsd/freebsd-wifi-build/wiki/Tp-LinkTLWR1043ND
I've built it on 10.2-RELEASE.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: OpenPGP digital signature
URL: <http://lists.freebsd.org/pipermail/freebsd-mips/attachments/20151008/c1d56887/attachment.bin>


More information about the freebsd-mips mailing list