Trying to get MALTA64 running under qemu
Adrian Chadd
adrian at freebsd.org
Sun Oct 19 02:18:46 UTC 2014
Hi,
can you try qemu-devel?
-a
On 18 October 2014 15:59, Ben Morrow <ben at morrow.me.uk> wrote:
> I'm considering buying an ERL to use as a local router, but before I did
> I thought I'd make sure the ports I want to run work properly with MIPS,
> so I'm trying to bring up a qemu-system-mips64 instance. I've built
> world and kernel (using MALTA64) for mips.mips64, and built a disk image
> following the instructions on the MipsEmulation page on the wiki. The
> source I am using is a slightly patched 10-STABLE from 2014-09-09; the
> patches have nothing to do with MIPS.
>
> However, when I try to bring qemu up, the system appears to hang after
> probing the ata devices. Over the course of about 30 seconds the qemu
> process goes up to 100% of one CPU, and no more output appears on the
> console. This appears to happen regardless of the disk images I pass to
> qemu; I've tried passing a UFS image, a file full of zeros, no disks at
> all, and (just in case) both -hda and -hdc. I've included the boot log
> below; I'd appreciate any advice.
>
> Ben
>
> % uname -m
> amd64
> % pkg info -E qemu
> qemu-0.11.1_16
> % qemu-system-mips64 -M malta -kernel yarrow.kernel -hda yarrow.ufs -nographic
> entry: platform_start()
> cmd line: yarrow.kernel
> envp:
> memsize = 134217728
> modetty0 = 38400n8r
> memsize = 08000000
> Cache info:
> picache_stride = 4096
> picache_loopcount = 8
> pdcache_stride = 4096
> pdcache_loopcount = 8
> cpu0: MIPS Technologies processor v160.130
> MMU: Standard TLB, 48 entries
> L1 i-cache: 4 ways of 256 sets, 32 bytes per line
> L1 d-cache: 4 ways of 256 sets, 32 bytes per line
> Config1=0xdea3519b<PerfCount,WatchRegs,EJTAG,FPU>
> Physical memory chunk(s):
> 0x622000 - 0x7ffffff, 127787008 bytes (31198 pages)
> Maxmem is 0x8000000
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2014 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 10.1-PRERELEASE #0 3c1e5d7(mauzo/10-S): Sat Oct 18 02:43:24 BST 2014
> root at anubis:/usr/obj/mips.mips64/usr/src/sys/MALTA64 mips
> gcc version 4.2.1 20070831 patched [FreeBSD]
> Preloaded elf kernel "kernel" at 0xffffffff8061b2c0.
> real memory = 134217728 (131072K bytes)
> Physical memory chunk(s):
> 0x0073f000 - 0x07cadfff, 123138048 bytes (30063 pages)
> avail memory = 121868288 (116MB)
> random device not loaded; using insecure entropy
> mem: <memory>
> null: <null device, zero device>
> nfslock: pseudo-device
> nexus0: <MIPS32 root nexus>
> gt0: <GT64120 chip> on nexus0
> pcib0: <GT64120 PCI bridge> on gt0
> pci0: <PCI bus> on pcib0
> pci0: domain=0, physical bus=0
> found-> vendor=0x11ab, dev=0x4620, revid=0x10
> domain=0, bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=0
> map[14]: type Prefetchable Memory, range 32, base 0x1000000, size 24, memory disabled
> map[18]: type Memory, range 32, base 0x1c000000, size 26, memory disabled
> map[1c]: type Memory, range 32, base 0x1f000000, size 24, memory disabled
> map[20]: type Memory, range 32, base 0x14000000, size 26, memory disabled
> map[24]: type I/O Port, range 32, base 0x14000000, size 26, port disabled
> pcib0: no IRQ mapping for 0/0/0/1
> found-> vendor=0x8086, dev=0x7110, revid=0x00
> domain=0, bus=0, slot=10, func=0
> class=06-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x7111, revid=0x00
> domain=0, bus=0, slot=10, func=1
> class=01-01-80, hdrtype=0x00, mfdev=0
> cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> map[20]: type I/O Port, range 32, base 0, size 4, port disabled
> found-> vendor=0x8086, dev=0x7112, revid=0x01
> domain=0, bus=0, slot=10, func=2
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=d, irq=0
> map[20]: type I/O Port, range 32, base 0, size 5, port disabled
> pcib0: no IRQ mapping for 0/10/2/4
> found-> vendor=0x8086, dev=0x7113, revid=0x03
> domain=0, bus=0, slot=10, func=3
> class=06-80-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=0
> pcib0: no IRQ mapping for 0/10/3/1
> found-> vendor=0x1022, dev=0x2000, revid=0x10
> domain=0, bus=0, slot=11, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns)
> intpin=a, irq=0
> map[10]: type I/O Port, range 32, base 0, size 5, enabled
> map[14]: type Memory, range 32, base 0, size 5, enabled
> found-> vendor=0x1013, dev=0x00b8, revid=0x00
> domain=0, bus=0, slot=18, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0003, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> map[10]: type Prefetchable Memory, range 32, base 0, size 25, enabled
> map[14]: type Memory, range 32, base 0, size 12, enabled
> uart0: <Non-standard ns8250 class UART with FIFOs> on obio0
> uart0: console (9600,n,8,1)
> uart0: fast interrupt
> pci0: <bridge, PCI-ISA> at device 10.0 (no driver attached)
> atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376 at device 10.1 on pci0
> atapci0: Lazy allocation of 0x10 bytes rid 0x20 type 4 at 0x100
> ata0: <ATA channel> at channel 0 on atapci0
> ata1: <ATA channel> at channel 1 on atapci0
> pci0: <serial bus, USB> at device 10.2 (no driver attached)
> pci0: <bridge> at device 10.3 (no driver attached)
> le0: <AMD PCnet-PCI> irq 10 at device 11.0 on pci0
> le0: Lazy allocation of 0x20 bytes rid 0x10 type 4 at 0x120
> le0: 16 receive buffers, 4 transmit buffers
> le0: bpf attached
> le0: Ethernet address: 52:54:00:12:34:56
> vgapci0: <VGA-compatible display> at device 18.0 on pci0
> vgapci0: Boot video device
> clock0: <Generic MIPS32 ticker> on nexus0
> Timecounter "MIPS32" frequency 100000000 Hz quality 800
> Event timer "MIPS32" frequency 100000000 Hz quality 800
> Device configuration finished.
> Timecounters tick every 10.000 msec
> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 2048
> lo0: bpf attached
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x00 err=0x00 lsb=0xff msb=0xff
> ata0: reset tp2 stat0=50 stat1=00 devices=0x1
> ata1: reset tp1 mask=03 ostat0=50 ostat1=00
> ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: stat1=0x00 err=0x00 lsb=0xff msb=0xff
> ata1: reset tp2 stat0=00 stat1=00 devices=0x10000
>
> (The emulator hangs at this point. I've left it for over an hour and it
> just sits there at 100% CPU, making no further progress.)
>
> _______________________________________________
> freebsd-mips at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mips
> To unsubscribe, send any mail to "freebsd-mips-unsubscribe at freebsd.org"
More information about the freebsd-mips
mailing list