Ubiquiti EdgeRouter Lite works multi-user with -CURRENT.

[Milan Obuch]

On Mon, 20 May 2013 08:27:40 -0700, Juli Mallett <jmallett at FreeBSD.org>
wrote:

> On Mon, May 20, 2013 at 8:25 AM, Milan Obuch <freebsd-mips at dino.sk>
> wrote:
> > Yes, output is from 'gpioctl -f /dev/gpioc0 -lv' command execution.
> > Actually, I wrote all 16 pins (0 to 15) in
> > sys/mips/cavium/octeon_gpio.c so I can see quickly which GPIO pin
> > is connected to reset switch. Pin 11 changed when pressing the
> > switch.
> 
> Could you try commenting out everything but pin 11 in octeon_gpio.c
> and rebuilding?  I'm wondering if one of those pins may have been
> in-use to talk to some Ethernet hardware or something like that, and
> that its operation was disrupted by the GPIO driver.

Hi,

it took me some time to build new kernel, howerver, even with only pin
11 defined in octeon_gpio.c it behaves the same way. If connected to
gigabit card it works, connecting to 100 megabit switch meens no
network activity. Later today I will test it against other device if
something changes.

Regards,
Milan