RSPRO tftpd freebsd boot freeze

[Monthadar Al Jaberi]

Hi,

Sorry if this is an old board. I am having trouble boot RSPRO using tftpd.

I am using Adrian's mkfwimage.c modified image too create image.

The same kernel image that is padded if I load it from Redboot prompt
boots fine. Grateful for any tips :)

this is a log from RSPRO when it hang (after receiving and writing the image):
TFTPD: Incoming connection from 172.16.0.100:48745
Received:  9503128 bytes
Firmware Version: RSPRO.ar7100pro.FreeBSD.test
Initializing default partitions for 16M flash size.
Created 'kernel' - base: 0xBF030000, mem base; 0x80050100, entry:
0x80050100, size: 0x005F0000
Created 'rootfs' - base: 0xBF620000, mem base; 0xBF170000, entry:
0x00000000, size: 0x00510000

Updating FIS directory!
... Erase from 0xbfff0000-0xc0000000: .
... Program from 0x87ff0000-0x88000000 at 0xbfff0000: .

Flashing partition 'kernel' (size: 0x005F0000, actual data: 0x005F0000)
... Erase from 0xbf030000-0xbf620000:
...............................................................................................
... Program from 0x8006e144-0x8065e144 at 0xbf030000:
...............................................................................................

Flashing partition 'rootfs' (size: 0x00510000, actual data: 0x00320000)
... Erase from 0xbf620000-0xbfb30000:
.................................................................................
... Program from 0x8065e184-0x8097e184 at 0xbf620000:
..................................................
... Resetting.+
AR8316 PHY found on MAC0
AR8316 PHY found on MAC1
Ethernet eth0: MAC address 00:15:6d:c8:c9:32
IP: 172.16.3.25/255.255.0.0, Gateway: 172.16.0.1
Default server: 172.16.0.101

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Ubiquiti Networks certified release, version 0.9.00318M.0905121200 -
built 12:01:38, May 12 2009

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: Ubiquiti RouterStation PRO
 Arch: ar7100pro
  RAM: 0x80000000-0x88000000, [0x8003bf00-0x87fe1000] available
Flash: 0xbf000000-0xc0000000, in 256 blocks of 0x00010000 bytes each
== Executing boot script in 1.000 seconds - enter ^C to abort
RedBoot> fis load kernel
RedBoot> exec
Now booting linux kernel:
 Base address 0x80050000 Entry 0x80050100
 memsize=0x08000000
 modetty0=0,n,8,1,hw
 board=RouterStation PRO
 ethaddr=00.15.6d.c8.c9.32

-- 
Monthadar Al Jaberi