Cisco 2511 Access Server + FreeBSD 5.4-STABLE

[James Ryan]

Hello all,

I apologize if this is trivial, but I am having some issues getting a 
Cisco 2511 Access Server to talk to a FreeBSD 5.4-STABLE machine 
connected from com1 to the async line #1 on the Cisco box via RJ-45 to 
DB9 serial adapter.

I have enabled getty on ttyd0; here is the line from ttys:
% cat /etc/ttys | grep ttyd0
ttyd0   "/usr/libexec/getty std.9600"   vt100   on secure


I also know that getty is listening on ttyd0:
% ps -ax | grep ttyd0
30951  d0  Is+    0:00.00 /usr/libexec/getty std.9600 ttyd0


When I telnet to the IP address of the Ethernet interface on the Cisco 
box, it simply hangs upon connect.  I am guessing this means there is no 
communication between the 2511 and my FreeBSD machine.  This happens 
when I telnet from both the Cisco machine and any other box on the network.

% telnet 192.168.2.10 2001
Trying 192.168.2.10...
Connected to 192.168.2.10.
Escape character is '^]'.


Here is a copy of my cisco config:

sterm1#show running-config
Building configuration...

Current configuration : 734 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname sterm1
!
enable secret 5 $1$aDXI$a60Yn9vChs6U10vGhQn0Q/
enable password xxxx
!
!
!
!
!
ip subnet-zero
no ip finger
ip host port1 2001 192.168.2.10
!
!
!
!
interface Ethernet0
  ip address 192.168.2.10 255.255.255.0
!
interface Serial0
  no ip address
  shutdown
!
interface Serial1
  no ip address
  shutdown
!
router igrp 1
  redistribute connected
  network 192.168.2.0
!
ip classless
ip http server
!
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
!
line con 0
  transport input none
line 1 16
  no exec
  transport input telnet
  stopbits 1
line aux 0
line vty 0 4
  password xxxx
  login
!
end


I know this is a mess of information, but any advice anyone has with 
this would be GREATLY appreciated; I am about to pull my hair out.

Cheers,

James