Console/Access Server

[Bob Martin]

You need a portmaster 2E with an ISDN blade.

Have a look at www.portmaster.com

Bob Martin

Evan Sayer wrote:
> Hello-
> I am looking for a rackmount server that will take care of both incoming 
> ISDN data calls and can connect my serial consoles to my LAN via telnet 
> or ssh.  Basically I need a access/console server with 2 or more ISDN 
> BRI ports with modems, 6 or more async serial ports for serial consoles, 
> and ethernet.  I want to be able to accept two calls on each ISDN line 
> at 64k/56k a piece with PPP and allocate dynamic IPs per call, and I 
> want to connect each of my server's serial consoles to a serial port and 
> be able to telnet to it with its specific TCP/IP port or a using a 
> rotary.  I've been looking at several servers so far- Livingston 
> Portmaster 3 and Cisco 2503, but I am really not sure if they will do 
> what I want (sort of new to this stuff).  I am probably looking at 
> buying used hardware, and I don't want to spend more than $250 (ebay 
> perhaps).  Any help is greatly appreciated.
> 
> _______________________________________________
> freebsd-isp at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-isp
> To unsubscribe, send any mail to "freebsd-isp-unsubscribe at freebsd.org"