Installing FreeBSD 6.2-RELEASE IA64 on IBM X455

Dominique SA domze.sa at gmail.com
Wed May 9 17:12:09 UTC 2007 

So as per marcel recommandation i used 7.0-CURRENT-200704-ia64-disc1.iso

and this is the log of the boot
IBM x455 SAL/EFI Firmware
SAL Version: 3.00 [ 2.29]
EFI Version: 1.10 [14.62]
Build Image: OYKT29A
TimeStamp:   2005/08/23 18:28:41


GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200704 #0: Sat Apr 14 03:19:00 UTC 2007
    root at pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC
CPU: Madison (1500.00-Mhz Itanium 2)
  Origin = "GenuineIntel"  Revision = 5
  Features = 0x1<LB>
real memory  = 2088148992 (1991 MB)
avail memory = 1973878784 (1882 MB)
FPSWA Revision = 0x10012, Entry = 0xe00000001be60050
SMP: WARNING: cpu1 did not wake up
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: SAPIC Id=0, SAPIC Eid=0 (BSP)
cpu1: SAPIC Id=6, SAPIC Eid=0
acpi0: <IBM SERMOW> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xf08-0xf0b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x900-0x9ff mem
0x81000000-0x81ffffff,0x8
2200000-0x82200fff irq 39 at device 3.0 on pci0
pci0: <bridge> at device 4.0 (no driver attached)
pci0: <bridge, PCI-ISA> at device 5.0 (no driver attached)
atapci0: <VIA 82C686B UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x3
76,0x700-0x70f at device 5.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0x800-0x81f irq 18 at device 5.2 on
pci0

uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x820-0x83f irq 18 at device 5.3 on
pci0

uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
pci0: <old, non-VGA display device> at device 5.4 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1000-0x10ff mem
0x82500000-0x8250fff
f,0x82510000-0x8251ffff irq 40 at device 3.0 on pci1
mpt0: [GIANT-LOCKED]
mpt0: [ITHREAD]
mpt0: MPI Version=1.2.15.0
mpt0: Capabilities: ( RAID-1 SAFTE )
mpt0: 1 Active Volume (1 Max)
mpt0: 2 Hidden Drive Members (6 Max)
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x1100-0x11ff mem
0x82520000-0x8252fff
f,0x82530000-0x8253ffff irq 41 at device 3.1 on pci1
mpt1: [GIANT-LOCKED]
mpt1: [ITHREAD]
mpt1: MPI Version=1.2.15.0
mpt1: Capabilities: ( RAID-1 SAFTE )
mpt1: 0 Active Volumes (0 Max)
mpt1: 0 Hidden Drive Members (0 Max)
pci1:4:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x2002> mem
0x8
2540000-0x8254ffff,0x82550000-0x8255ffff irq 42 at device 4.0 on pci1
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX
-FDX, auto
bge0: Ethernet address: 00:02:55:1f:83:fc
bge0: [ITHREAD]
pci1:4:1: bad VPD cksum, remain 14
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x2002> mem
0x8
2560000-0x8256ffff,0x82570000-0x8257ffff irq 11 at device 4.1 on pci1
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX
-FDX, auto
bge1: Ethernet address: 00:02:55:9f:83:fc
bge1: [ITHREAD]
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI Host-PCI bridge> on acpi0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci7: <ACPI PCI bus> on pcib4
pcib5: <ACPI Host-PCI bridge> on acpi0
pci9: <ACPI PCI bus> on pcib5
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
uart0: [FILTER]
uart0: console (115200,n,8,1)
ums0: <vendor 0x04b3 product 0x3100, class 0/0, rev 1.00/4.41, addr 2> on
uhub0
ums0: 3 buttons and Z dir.
ukbd0: <Silitek IBM USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on uhub0
uhid0: <Silitek IBM USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on uhub0
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 8388608 bytes at 0xe000000004bcc938
mpt0:vol0(mpt0:0:0): Settings ( Hot-Plug-Spares )
mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
mpt0:vol0(mpt0:0:0): 2 Members:
      (mpt0:1:0:0): Primary Online
      (mpt0:1:1:0): Secondary Out of Sync Online
mpt0:vol0(mpt0:0:0): RAID-1 - Degraded
mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing )
mpt0:vol0(mpt0:0:0): Low Priority Re-Sync
mpt0:vol0(mpt0:0:0): 71053387 of 71087626 blocks remaining
(mpt0:vol0:0): Physical (mpt0:0:0:0), Pass-thru (mpt0:1:0:0)
(mpt0:vol0:0): Online
(mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:1:0)
(mpt0:vol0:1): Online
(mpt0:vol0:1): Status ( Out-Of-Sync )
acd0: DVDROM <HL-DT-STDVD-ROM GDR8081N/0012> at ata0-master UDMA33
Waiting 5 seconds for SCSI devices to settle
mpt0:vol0(mpt0:0:0): Volume Status Changed
mpt0:vol0(mpt0:0:0): RAID-1 - Degraded
mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing )
mpt0:vol0(mpt0:0:0): Low Priority Re-Sync
mpt0:vol0(mpt0:0:0): 71049163 of 71087626 blocks remaining
mpt0:vol0(mpt0:0:0): RAID-1 - Degraded
mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing )
mpt0:vol0(mpt0:0:0): Low Priority Re-Sync
mpt0:vol0(mpt0:0:0): 71049163 of 71087626 blocks remaining
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <IBM 25P3495a S320  1 1> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
pass2 at mpt0 bus 1 target 0 lun 0
pass2: <IBM-ESXS MAP3367NC     FN B109> Fixed unknown SCSI-3 device
pass2: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
pass2: Command Queueing Enabled
pass3 at mpt0 bus 1 target 1 lun 0
pass3: <IBM-ESXS ST336607LC    FN B25J> Fixed unknown SCSI-3 device
pass3: 320.000MB/s transfers (160.000MHz, offset 63, 16bit)
pass3: Command Queueing Enabled
da0 at mpt0 bus 0 target 0 lun 0
da0: <IBM VIRTUAL DISK  IM 1998> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing Enabled
da0: 34710MB (71087626 512 byte sectors: 255H 63S/T 4425C)
SMP: WARNING: sending of a test IPI failed
SMP: 2 CPUs found; 2 CPUs usable; 1 CPUs woken

fatal kernel trap (cpu 0):

    trap vector = 0x14 (Page Not Present)
    cr.iip      = 0xe0000000045c15c0
    cr.ipsr     = 0x1210080a2010 (mfl,ic,dt,dfh,rt,cpl=0,it,ri=1,bn)
    cr.isr      = 0x20400000000 (code=0,vector=0,r,ei=1)
    cr.ifa      = 0xa8
    curthread   = 0xe00000007da4b080
        pid = 13, comm = swi4: clock

On 5/9/07, Marcel Moolenaar <xcllnt at mac.com> wrote:
>
>
> On May 9, 2007, at 8:36 AM, Dominique SA wrote:
>
> > So i got it working on the serial console.
> >
> > When loading the kernel i got this:
> >
> > Trying to mount root from usf:/dev/md0
> > Fatal Kernel Trap (cpu 0)
> >
> > trap vector = 0x14 (page not present)
> > cr.iip = 0xe0000000045e350
> > cr.ipsr = 0x1010080a2010 (mfl, ic, dt, dfh, rt, cpl=0, it, ri=0, bn)
> > cr.isr = 0x40000000
> > cr.ifa = 0x8c
> > curthread = 0xe00000007db9ad20
>
> Interesting. Could you send the boot log of a
> verbose boot. Alternatively, you could try
> a FreeBSD -CURRENT snapshot. When the panic
> happens, you'll be dropped in the debugger.
> That allows us to capture a bit more state.
>
> --
> Marcel Moolenaar
> xcllnt at mac.com
>
>
>

More information about the freebsd-ia64 mailing list