i386/103624: Problem installing on Dell Powervault 745N

Thu Sep 28 01:20:23 PDT 2006

The following reply was made to PR i386/103624; it has been noted by GNATS.

From: "Jui-Nan Lin" <jnlin at csie.nctu.edu.tw>
To: bug-followup at FreeBSD.org, jmc at xisl.com
Cc:  
Subject: Re: i386/103624: Problem installing on Dell Powervault 745N
Date: Thu, 28 Sep 2006 16:18:51 +0800

 It seems the OS has recognized the SATA Controller, but could not get
 the hard disk.

 dmesg file below:
 Copyright (c) 1992-2006 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD 6.1-RELEASE #0: Sun May  7 04:32:43 UTC 2006
     root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
 ACPI APIC Table: <DELL   PE745N  >
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.12-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
   Logical CPUs per core: 2
 real memory  = 1073479680 (1023 MB)
 avail memory = 1037357056 (989 MB)
 ioapic0: Changing APIC ID to 2
 ioapic1: Changing APIC ID to 3
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 ioapic1 <Version 2.0> irqs 24-47 on motherboard
 kbd1 at kbdmux0
 acpi0: <DELL PE745N> on motherboard
 acpi0: Power Button (fixed)
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 cpu0: <ACPI CPU> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
 0xece0-0xecff mem 0xfe3e0000-0xfe3fffff irq 18 at device 1.0 on pci1
 em0: Ethernet address: 00:11:43:cd:ab:98
 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
 pci2: <ACPI PCI bus> on pcib2
 atapci0: <Intel 31244 SATA150 controller> mem 0xfe1ff000-0xfe1fffff
 irq 25 at device 2.0 on pci2
 ata2: <ATA channel 0> on atapci0
 ata3: <ATA channel 1> on atapci0
 ata4: <ATA channel 2> on atapci0
 ata5: <ATA channel 3> on atapci0
 uhci0: <UHCI (generic) USB controller> port 0xbce0-0xbcff irq 16 at
 device 29.0 on pci0
 uhci0: [GIANT-LOCKED]
 usb0: <UHCI (generic) USB controller> on uhci0
 usb0: USB revision 1.0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1: <UHCI (generic) USB controller> port 0xbcc0-0xbcdf irq 19 at
 device 29.1 on pci0
 uhci1: [GIANT-LOCKED]
 usb1: <UHCI (generic) USB controller> on uhci1
 usb1: USB revision 1.0
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 pci0: <base peripheral> at device 29.4 (no driver attached)
 pci0: <base peripheral, interrupt controller> at device 29.5 (no
 driver attached)
 ehci0: <Intel 6300ESB USB 2.0 controller> mem 0xfe500000-0xfe5003ff
 irq 23 at device 29.7 on pci0
 ehci0: [GIANT-LOCKED]
 usb2: EHCI version 1.0
 usb2: companion controllers, 2 ports each: usb0 usb1
 usb2: <Intel 6300ESB USB 2.0 controller> on ehci0
 usb2: USB revision 2.0
 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2: 4 ports with 4 removable, self powered
 umass0: Myson Century, Inc. USB Mass Storage Device, rev 2.00/b0.08, addr 2
 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pci3: <ACPI PCI bus> on pcib3
 em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
 0xccc0-0xccff mem 0xfdee0000-0xfdefffff irq 21 at device 2.0 on pci3
 em1: Ethernet address: 00:11:43:cd:ab:99
 pci3: <display, VGA> at device 14.0 (no driver attached)
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
 fdc0: does not respond
 device_attach: fdc0 attach returned 6
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
 fdc0: does not respond
 device_attach: fdc0 attach returned 6
 pmtimer0 on isa0
 orm0: <ISA Option ROMs> at iomem
 0xc0000-0xc7fff,0xc8000-0xc8fff,0xec000-0xeffff on isa0
 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
 ata1 at port 0x170-0x177,0x376 irq 15 on isa0
 ppc0: parallel port not found.
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sio1: configured irq 3 not in bitmap of probed irqs 0
 sio1: port may not be enabled
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 Timecounter "TSC" frequency 3000118762 Hz quality 800
 Timecounters tick every 1.000 msec
 md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0a91928
 cd0 at umass-sim0 bus 0 target 0 lun 0
 cd0: <ASUS DVD-E616P2 1.03> Removable CD-ROM SCSI-0 device
 cd0: 40.000MB/s transfers
 cd0: cd present [258684 x 2048 byte records]
 (cd0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
 (cd0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
 (cd0:umass-sim0:0:0:0): SCSI Status: Check Condition
 (cd0:umass-sim0:0:0:0): MEDIUM ERROR asc:11,5
 (cd0:umass-sim0:0:0:0): L-EC uncorrectable error
 (cd0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
 (cd0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
 (cd0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
 (cd0:umass-sim0:0:0:0): SCSI Status: Check Condition
 (cd0:umass-sim0:0:0:0): MEDIUM ERROR asc:11,5
 (cd0:umass-sim0:0:0:0): L-EC uncorrectable error
 (cd0:umass-sim0:0:0:0): Retrying Command (per Sense Data)

 pciconf -lv:
 hostb0 at pci0:0:0:	class=0x060000 card=0x00000000 chip=0x25788086
 rev=0x02 hdr=0x00
     class    = bridge
     subclass = HOST-PCI
 pcib1 at pci0:3:0:	class=0x060400 card=0x00000000 chip=0x257b8086 rev=0x02 hdr=0x01
     class    = bridge
     subclass = PCI-PCI
 pcib2 at pci0:28:0:	class=0x060400 card=0x00000050 chip=0x25ae8086
 rev=0x02 hdr=0x01
     class    = bridge
     subclass = PCI-PCI
 uhci0 at pci0:29:0:	class=0x0c0300 card=0x01661028 chip=0x25a98086
 rev=0x02 hdr=0x00
     class    = serial bus
     subclass = USB
 uhci1 at pci0:29:1:	class=0x0c0300 card=0x01661028 chip=0x25aa8086
 rev=0x02 hdr=0x00
     class    = serial bus
     subclass = USB
 none0 at pci0:29:4:	class=0x088000 card=0x01661028 chip=0x25ab8086
 rev=0x02 hdr=0x00
     class    = base peripheral
 none1 at pci0:29:5:	class=0x080020 card=0x01661028 chip=0x25ac8086
 rev=0x02 hdr=0x00
     class    = base peripheral
     subclass = interrupt controller
 ehci0 at pci0:29:7:	class=0x0c0320 card=0x01661028 chip=0x25ad8086
 rev=0x02 hdr=0x00
     class    = serial bus
     subclass = USB
 pcib3 at pci0:30:0:	class=0x060400 card=0x00000000 chip=0x244e8086
 rev=0x0a hdr=0x01
     class    = bridge
     subclass = PCI-PCI
 isab0 at pci0:31:0:	class=0x060100 card=0x00000000 chip=0x25a18086
 rev=0x02 hdr=0x00
     class    = bridge
     subclass = PCI-ISA
 none2 at pci0:31:3:	class=0x0c0500 card=0x01661028 chip=0x25a48086
 rev=0x02 hdr=0x00
     class    = serial bus
     subclass = SMBus
 em0 at pci1:1:0:	class=0x020000 card=0x01651028 chip=0x10758086 rev=0x00 hdr=0x00
     class    = network
     subclass = ethernet
 atapci0 at pci2:2:0:	class=0x010600 card=0x01661028 chip=0x32008086
 rev=0x00 hdr=0x00
     class    = mass storage
 em1 at pci3:2:0:	class=0x020000 card=0x01651028 chip=0x10768086 rev=0x00 hdr=0x00
     class    = network
     subclass = ethernet
 none3 at pci3:14:0:	class=0x030000 card=0x01661028 chip=0x47521002
 rev=0x27 hdr=0x00
     class    = display
     subclass = VGA

 Trying to mount root from ufs:/dev/md0