i386/91745: Second processor not detected on Proliant ML530 G2 with latest ROM firmware

Fri Jan 20 02:10:06 PST 2006

The following reply was made to PR i386/91745; it has been noted by GNATS.

From: Alessandro Dellavedova <alessandro.dellavedova at ifom-ieo-campus.it>
To: bug-followup at FreeBSD.org
Cc:  
Subject: Re: i386/91745: Second processor not detected on Proliant ML530 G2 with latest ROM firmware
Date: Fri, 20 Jan 2006 11:03:29 +0100

 I've done a tests using FreeBSD 5.2.1, GENERIC kernel compiled with  
 SMP support, the second processor is correctly identified and launched:

 FreeBSD  5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Thu Jan 19 17:18:58  
 GMT 2006     root@:/usr/obj/usr/src/sys/GENERIC  i386

 # dmesg
 Copyright (c) 1992-2004 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
          The Regents of the University of California. All rights  
 reserved.
 FreeBSD 5.2.1-RELEASE #0: Thu Jan 19 17:18:58 GMT 2006
      root@:/usr/obj/usr/src/sys/GENERIC
 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
 Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a35244.
 ACPI APIC Table: <COMPAQ 00000083>
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) XEON(TM) CPU 2.40GHz (2399.93-MHz 686-class CPU)
    Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4

 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE 
 ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
    Hyperthreading: 2 logical CPUs
 real memory  = 2147459072 (2047 MB)
 avail memory = 2080706560 (1984 MB)
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  6
 ioapic0 <Version 1.1> irqs 0-15 on motherboard
 ioapic1 <Version 1.1> irqs 16-31 on motherboard
 ioapic2 <Version 1.1> irqs 32-47 on motherboard
 ioapic3 <Version 1.1> irqs 48-63 on motherboard
 Pentium Pro MTRR support enabled
 npx0: [FAST]
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 acpi0: <COMPAQ P22     > on motherboard
      ACPI-1016: *** Info: There are no GPE blocks defined in the FADT
 acpi0: Power Button (fixed)
 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
 pcibios: BIOS version 2.10
 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
 acpi_cpu0: <CPU> on acpi0
 acpi_cpu1: <CPU> on acpi0
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 acpi_tz0: <Thermal Zone> on acpi0
 pcib0: <ACPI Host-PCI bridge> on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pcib0: slot 15 INTA is routed to irq 10
 pci0: <base peripheral> at device 2.0 (no driver attached)
 pci0: <display, VGA> at device 3.0 (no driver attached)
 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2800-0x283f mem  
 0xf5e00000-0xf5efffff,0xf5fe0000-0xf5fe0fff irq 29 at device 4.0 on pci0
 fxp0: Ethernet address 00:08:02:b0:8c:47
 miibus0: <MII bus> on fxp0
 inphy0: <i82555 10/100 media interface> on miibus0
 inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 ahc0: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port  
 0x2c00-0x2cff mem 0xf5df0000-0xf5df0fff irq 30 at device 5.0 on pci0
 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
 ahc1: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port  
 0x3000-0x30ff mem 0xf5de0000-0xf5de0fff irq 31 at device 5.1 on pci0
 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
 isab0: <PCI-ISA bridge> at device 15.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x2000-0x200f, 
 0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
 ata0: at 0x1f0 irq 14 on atapci0
 ata0: [MPSAFE]
 ata1: simplex device, DMA on primary only
 ata1: at 0x170 irq 15 on atapci0
 ata1: [MPSAFE]
 ohci0: <OHCI (generic) USB controller> mem 0xf5dd0000-0xf5dd0fff irq  
 10 at device 15.2 on pci0
 usb0: OHCI version 1.0, legacy support
 usb0: SMM does not respond, resetting
 usb0: <OHCI (generic) USB controller> on ohci0
 usb0: USB revision 1.0
 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 4 ports with 4 removable, self powered
 pcib1: <ACPI Host-PCI bridge> on acpi0
 pci1: <ACPI PCI bus> on pcib1
 pcib2: <PCI-PCI bridge> at device 2.0 on pci1
 pci2: <PCI bus> on pcib2
 pcib2: slot 4 INTA is routed to irq 18
 pcib2: slot 5 INTA is routed to irq 19
 pcib2: slot 6 INTA is routed to irq 18
 fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem  
 0xf7d00000-0xf7dfffff,0xf7ef0000-0xf7ef0fff irq 18 at device 4.0 on pci2
 fxp1: Ethernet address 00:08:02:b0:18:78
 miibus1: <MII bus> on fxp1
 inphy1: <i82555 10/100 media interface> on miibus1
 inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 fxp2: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem  
 0xf7b00000-0xf7bfffff,0xf7cf0000-0xf7cf0fff irq 19 at device 5.0 on pci2
 fxp2: Ethernet address 00:08:02:b0:18:79
 miibus2: <MII bus> on fxp2
 inphy2: <i82555 10/100 media interface> on miibus2
 inphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> mem  
 0xf7ad0000-0xf7adffff,0xf7ae0000-0xf7afffff irq 18 at device 6.0 on pci2
 em0:  Speed:N/A  Duplex:N/A
 pci1: <base peripheral> at device 30.0 (no driver attached)
 pcib3: <ACPI Host-PCI bridge> on acpi0
 pci5: <ACPI PCI bus> on pcib3
 pci5: <base peripheral> at device 30.0 (no driver attached)
 pcib4: <ACPI Host-PCI bridge> on acpi0
 pci9: <ACPI PCI bus> on pcib4
 pcib5: <ACPI Host-PCI bridge> on acpi0
 pci13: <ACPI PCI bus> on pcib5
 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
 kbd0 at atkbd0
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: model Generic PS/2 mouse, device ID 0
 ppc0 port 0x778-0x77d,0x378-0x37f irq 7 drq 0 on acpi0
 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
 ppbus0: <Parallel port bus> on ppc0
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 sio0 port 0x3f8-0x3ff irq 4 on acpi0
 sio0: type 16550A
 sio1 port 0x2f8-0x2ff irq 3 on acpi0
 sio1: type 16550A
 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port  
 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
 fdc0: FIFO enabled, 8 bytes threshold
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 acpi_cpu2: <CPU> on acpi0
 device_probe_and_attach: acpi_cpu2 attach returned 6
 orm0: <Option ROMs> at iomem 0xee000-0xeffff,0xc0000-0xc7fff on isa0
 pmtimer0 on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
 isa0
 Timecounters tick every 10.000 msec
 acd0: CDROM <COMPAQ SC-140C> at ata0-master PIO4
 Waiting 15 seconds for SCSI devices to settle
 GEOM: create disk da0 dp=0xc86b9850
 pass1 at ahc0 bus 0 target 15 lun 0
 pass1: <COMPAQ PROLIANT 4L2I 1.70> Fixed Processor SCSI-2 device
 pass1: 3.300MB/s transfers
 da0 at ahc0 bus 0 target 0 lun 0
 da0: <COMPAQ BD0186459A B016> Fixed Direct Access SCSI-3 device
 da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged  
 Queueing Enabled
 da0: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
 SMP: AP CPU #1 Launched!
 Mounting root from ufs:/dev/da0s1a
 em0: Link is up 100 Mbps Full Duplex

 # sysctl -a | grep smp
 kern.timecounter.smp_tsc: 0
 kern.smp.active: 1
 kern.smp.disabled: 0
 kern.smp.cpus: 2
 kern.smp.forward_signal_enabled: 1
 kern.smp.forward_roundrobin_enabled: 1

 # sysctl -a | grep ncpu
 hw.ncpu: 2

 Maybe something changed in the APIC management since 5.2.1 and thus  
 resulting in the processor not being detected on 5.4 ?

 I will try also with FreeBSD 6.0, and if somebody of the src  
 mantainers are willing to help I can give unrestricted SSH access to  
 the machine.

 Thank you for your time, best regards