i386/91038: [panic] 6.0-RELEASE on Fujitsu Siemens Amilo Pro v2040
can't resume from sleep
Vaida Bogdan
vaida.bogdan at gmail.com
Wed Dec 28 18:30:05 PST 2005
>Number: 91038
>Category: i386
>Synopsis: [panic] 6.0-RELEASE on Fujitsu Siemens Amilo Pro v2040 can't resume from sleep
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Dec 29 02:30:03 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator: Vaida Bogdan
>Release: 6.0-RELEASE-p1
>Organization:
>Environment:
FreeBSD amber.etc.upt.ro 6.0-RELEASE-p1 FreeBSD 6.0-RELEASE-p1 #5: Mon Dec 26 01:08:59 EET 2005 root at amber.etc.upt.ro:/usr/obj/usr/src/sys/AMBER i386
>Description:
ACPI resume doesn't work:
If I power on after a sleep (acpiconf -s 3):
ioapic_suspend: not_implemented!
ioapic_suspend: not_implemented!
[...]
fwohci0: Phy 1394a available S400, 2 ports
fwohci0: Link S400, max_rec 2048 bytes
fwohci0: Initiate bus reset
[ Freezes ]
tried to disable apic in kernel config with a partial success: it boots but hdd doesn't resume
fwohci0: fwohci_pci_suspend
fwohci0: device physically ejected?
fw0hci0: suspend request ignored (not ready yet)
fwohci0: Phy 1394a available S400, 2 ports
fwohci0: Link S400, max_rec 2048 bytes
fwohci0: Initiate bus reset
fwohci0: Bus reset
fwohci0: node_id=0xc800ffc0 gen=0 CYCLEMASTER MODE
firewire0: 1 nodes maxhop <=0, cable IRM=0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
ad4 detached
g_vfs_done() ad4s1a [READ(offset=53...,length=2048)] error=6
g_vfs_done()...
vnode_pager_getpages: I/O read error
g_vfs_done...
[ seems I can run bash builtin commands => memory was restored ok ]
[ still ad4 remains detached ]
cd /bin
./ls
g_vfs_done() ...
vnode_pager_getpages: I/O read error
./ls: Input/Output error
APM (similar problem here)
1) Kernel config has: "device apm"
2) Load kernel module at boot:
apm_load="YES" to /boot/loader.conf
3) Hint.apm.0.disabled="0" in /boot/device.hints
4) Start apm automatically at boot:
apm_enable="YES" in /etc/rc.conf
5) Enable APM daemon:
apmd_enable="YES" to /etc/rc.conf
and I get the following error when starting apm:
apm: can't open /dev/apm: no such file or directory
/etc/rc: WARNING: /dev/apmctl not found; kernel is missing apm (4)
(kldstat shows no acpi loaded, I also tried using apm and pmtimer in
my kernel config file)
>How-To-Repeat:
acpiconf -s 3 on a Fujitsu Siemens Amilo Pro v2040
try to resume it
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-i386
mailing list