i386/84475: FreeBSD 5.4 problems pxe booting

[Patrick Michalski]

>Number:         84475
>Category:       i386
>Synopsis:       FreeBSD 5.4 problems pxe booting
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Aug 02 12:30:21 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Patrick Michalski
>Release:        FreeBSD 5.4-RELEASE
>Organization:
>Environment:
>Description:
      I am having some troubles net booting FreeBSD 5.4-RELEASE on a diskless box. It currently goes thru the tftp connection and pxeboot loader just fine and proceeds to load the kernel however it fails after that. This is what I am getting:

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Wed Jul 27 17:43:44 UTC 2005
    patricktech at alpha.implex.net:/usr/src/sys/i386/compile/alpha
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by National Semi (266.67-MHz 586-class CPU)
  Origin = "Geode by NSC"  Id = 0x540  Stepping = 0
  Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX>
real memory  = 134217728 (128 MB)
avail memory = 121802752 (116 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0000000-0xa0000fff irq 10 at device 6.0 on pci0
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:00:24:c4:86:d0
isab0: <PCI-ISA bridge> port 0x6200-0x623f,0x6100-0x613f at device 18.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge> at device 18.1 (no driver attached)
atapci0: <National Geode SC1100 ATA33 controller> port 0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 18.2 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge> at device 18.5 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xa0001000-0xa0001fff irq 11 at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
orm0: <ISA Option ROM> at iomem 0xc8000-0xd0fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: unable to get the current command byte value.
ppc0: parallel port not found.
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to accept, logging unlimited
ad0: FAILURE - SETFEATURES ENABLE RCACHE status=51<READY,DSC,ERROR> error=4<ABORTED>
ad0: FAILURE - SETFEATURES ENABLE WCACHE status=51<READY,DSC,ERROR> error=4<ABORTED>
ad0: 61MB <064MB ATA Flash Disk/AD-A015B> [977/4/32] at ata0-master PIO4
Mounting root from nfs:192.168.1.1:/fs/tftpboot
setrootbyname failed
NFS ROOT: 192.168.1.1:/tftpboot
exec /sbin/init: error 70
exec /sbin/oinit: error 70
exec /sbin/init.bak: error 70
exec /rescue/init: error 70
exec /stand/sysinstall: error 70
init: not found in path /sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init:/stand/sysinstall
panic: no init
Uptime: 2s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
>How-To-Repeat:
      
>Fix:
      
>Release-Note:
>Audit-Trail:
>Unformatted: