i386/59895: [hang] system hangs from disk IO errors [SATA]
&& Re: i386/63430: [ata] TIMEOUT - ATA READ
webjedi at speakeasy.net
webjedi at speakeasy.net
Mon Oct 4 07:50:26 PDT 2004
The following reply was made to PR i386/59895; it has been noted by GNATS.
From: webjedi at speakeasy.net
To: freebsd-gnats-submit at FreeBSD.org, derek at computinginnovations.com,
spam at spamspam.com
Cc: dak at solo.net, webjedi at speakeasy.net
Subject: Re: i386/59895: [hang] system hangs from disk IO errors [SATA]
&& Re: i386/63430: [ata] TIMEOUT - ATA READ
Date: Mon, 04 Oct 2004 14:49:07 +0000
Is there any status on this PR, I have found that my server is exhibiting=
the same issue that this PR is questioning, and this is using the same S=
ATA controller, but on the Intel board (dmesg below)... can somebody PLEA=
SE look at this. I have seen this issue brought up at no least of 4 times=
ont he mailing list and trice as a PR. I know we're all running 4.10, bu=
t it's supposed to be STABLE, and it's truly not. I'd be willing to run w=
hatever debugging commands are nessesary to help with diagnosing this for=
any willing developer who will make an honest attempt at fixing it. This=
problem with SATA has been around for close to a year... what's the deal=
?
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.=
FreeBSD 4.10-STABLE #9: Mon Sep 20 14:13:52 EDT 2004
root at mail.solo.net:/usr/obj/usr/src/sys/SOLONET
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.12-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf33 Stepping =3D 3
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory =3D 1071841280 (1046720K bytes)
avail memory =3D 1039335424 (1014976K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03dd000.
Warning: Pentium 4 CPU: PSE disabled
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc0363ce2 (1000022)
VESA: ATI RADEON VE
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00f3d10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 19 -> irq 16
IOAPIC #0 intpin 18 -> irq 17
IOAPIC #0 intpin 23 -> irq 18
IOAPIC #0 intpin 17 -> irq 19
pci0: <PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xf8000000-0xfbffffff at devi=
ce 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=3D8086 device=3D2579)> at device 1.0 on=
pci0
pci1: <PCI bus> on pcib1
drm0: <ATI Radeon QY RV100 VE> port 0xb800-0xb8ff mem 0xff8f0000-0xff8fff=
ff,0xe8000000-0xefffffff irq 2 at device 0.0 on pci1
info: [drm] AGP at 0xf8000000 64MB
info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
pcib2: <PCI to PCI bridge (vendor=3D8086 device=3D257b)> at device 3.0 on=
pci0
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xcc00=
-0xcc1f mem 0xff9e0000-0xff9fffff irq 17 at device 1.0 on pci2
em0: Speed:N/A Duplex:N/A
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe000-0xe01f irq=
2 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe400-0xe41f irq=
16 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe800-0xe81f irq=
17 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xec00-0xec1f irq=
2 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 18
pcib3: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci=
0
pci3: <PCI bus> on pcib3
isab0: <PCI to ISA bridge (vendor=3D8086 device=3D24d0)> at device 31.0 o=
n pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 SATA150 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0=
-0x3,0-0x7 irq 17 at device 31.2 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=3D0x8086, dev=3D0x24d3) at 31.3 irq 19
orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding en=
abled, default to accept, logging limited to 100 packets/entry by default=
IP Filter: v3.4.35 initialized. Default =3D pass all, Logging =3D enable=
d
SMP: AP CPU #1 Launched!
ad2: DMA limited to UDMA33, non-ATA66 cable or device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
ar0: 152627MB <ATA RAID1 array> [19457/255/63] status: READY subdisks:
0 READY ad2: 152627MB <WDC WD1600JD-00HBB0> [310101/16/63] at ata1-maste=
r UDMA33
1 READY ad3: 152627MB <WDC WD1600JD-00HBB0> [310101/16/63] at a=
ta1-slave UDMA33
acd0: CDROM <CREATIVE CD3231E> at ata0-master PIO4
Mounting root from ufs:/dev/ar0s1a
WARNING: / was not properly dismounted
em0: Link is up 10 Mbps Full Duplex
ad3: READ command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
ad3: READ command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
ad3: WRITE command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
ad3: READ command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
ad3: WRITE command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
ad3: READ command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
ad3: READ command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
ad3: READ command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
ad3: WRITE command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
ad3: READ command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
ad3: READ command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
ad3: READ command timeout tag=3D0 serv=3D0 - resetting
ata1: resetting devices .. ad2: DMA limited to UDMA33, non-ATA66 cable or=
device
ad3: DMA limited to UDMA33, non-ATA66 cable or device
done
%
More information about the freebsd-i386
mailing list