i386/68090: EHCI is not working with Intel 82801DB (ICH4)

[Alex K]

The following reply was made to PR i386/68090; it has been noted by GNATS.

From: Alex K <lesha at intercaf.ru>
To: freebsd-gnats-submit at FreeBSD.org
Cc:  
Subject: Re: i386/68090: EHCI is not working with Intel 82801DB (ICH4)
Date: Tue, 20 Jul 2004 01:13:57 +0400

 Lukas,
 
 now USB2.0 (Agrosy) disk connects ok, but stops responding
 after transfering about 50M of data with:
   da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
   umass0: Invalid CSW: tag 442 should be 449
 
 disk is detected as:
  umass0: vendor 0x0840 USB 2.0 Storage Device, rev 2.00/0.01, addr 2
  umass0: SCSI over Bulk-Only; quirks = 0x0000
  umass0:3:0:-1: Attached to scbus3
  da0 at umass-sim0 bus 0 target 0 lun 0
  da0: <USB 2.0 Storage Device 0100> Fixed Direct Access SCSI-0 device
  da0: 1.000MB/s transfers
  da0: 78533MB (160836480 512 byte sectors: 255H 63S/T 10011C)
 which is correct, only not sure about 1Mb/s, it gives me about 6-7Mb/s rate
 
 Sony Memory stick won't work, as I assume USB2.0 hubs are not yet supported.
 
 -- 
 perl -e 'print unpack("u","1;&5S:&%`:6YT97)C868N<G4`");'