i386/62807: 4.9 SMP does not work with Compaq Smart Array 3200
pimp
kama at pvp.se
Wed Feb 25 01:50:24 PST 2004
The following reply was made to PR i386/62807; it has been noted by GNATS.
From: pimp <kama at pvp.se>
To: freebsd-gnats-submit at FreeBSD.org, enemy5000 at hotmail.com
Cc:
Subject: Re: i386/62807: 4.9 SMP does not work with Compaq Smart Array 3200
Date: Wed, 25 Feb 2004 10:47:09 +0100 (CET)
FreeBSD 4.9-STABLE works with SMP on a Compaq DL380 with the SA3200.
What I had to do after erase with the compaq smart start, was to choose
Linux as the operating system to be installed.
Been running it since oct 2003 without any problem.
FreeBSD 4.9-STABLE FreeBSD 4.9-STABLE #2: Thu Dec 4 12:47:08 CET 2003
10:46AM up 81 days, 22:31, 1 user, load averages: 0.00, 0.00, 0.00
dmesg.boot:
...
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 8, version: 0x00220011, at 0xfec00000
...
ida0: <Compaq Smart Array 3200 controller> port 0x4000-0x40ff mem
0xc6ffff00-0xc6ffffff irq 15 at device 0.0 on pci1
ida0: drives=1 firm_rev=4.32
idad0: <Compaq Logical Drive> on ida0
idad0: 17363MB (35561280 sectors), blocksize=512
...
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0
intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
ata0-slave: ATAPI identify retries exceeded
SMP: AP CPU #1 Launched!
...
Cheers,
Bjorn
More information about the freebsd-i386
mailing list