i386/75090: READ_BIG errors with Sony CRX1611
Robert Backhaus
robbak at dodo.com.au
Tue Dec 14 20:30:26 PST 2004
>Number: 75090
>Category: i386
>Synopsis: READ_BIG errors with Sony CRX1611
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Dec 15 04:30:25 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Robert Backhaus
>Release: FreeBSD 5.3-STABLE i386
>Organization:
>Environment:
System: FreeBSD swegg.robbak.com 5.3-STABLE FreeBSD 5.3-STABLE #4: Wed Dec 15 13:28:02 EST 2004 root at swegg.robbak.com:/usr/obj/usr/src/sys/SWEGG i386
Athlon XP2400, SIS 748FX, Sony CRX1611 CD-RW
dmesg:
acd0: CDRW <SONY CD-RW CRX1611/TYS3> at ata1-master PIO4
config:
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
device atapicam
device cd # CD
Description:
Attempts to access the CD drive fail with the following error messages. These occour at boot time if there is a disk in the drive, and either when mounting the disk or shortly thereafter (I can often do two or three `ls'es and `cd's)
This problem first appeared when attempting to burn, but I hadn't checked it beforehand. It first showed on the 5.3 prereleases, but that co-incided with a motherboard swap.
Console log:
acd0: WARNING - READ_BIG DONEDRQ non conformant device
acd0: WARNING - READ_BIG read data overrun 24>0
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: timeout state=0 unexpected
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: timeout state=0 unexpected
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: timeout state=0 unexpected
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
ad0: WARNING - READ_DMA interrupt was seen but timeout fired LBA=22629209
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: timeout state=0 unexpected
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
(this log is from a mount attempt)
>Description:
>How-To-Repeat:
Attempt to use CRX1611 on FreeBSD 5.3.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-i386
mailing list