i386/75057: [QUIRK] Add support for ZICPlay USB MP3 Player

[Aurelien Nephtali]

>Number:         75057
>Category:       i386
>Synopsis:       [QUIRK] Add support for ZICPlay USB MP3 Player
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          change-request
>Submitter-Id:   current-users
>Arrival-Date:   Tue Dec 14 15:30:24 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator:     Aurelien Nephtali
>Release:        6.0-CURRENT
>Organization:
Legitravail
>Environment:
FreeBSD cri 6.0-CURRENT FreeBSD 6.0-CURRENT #23: Tue Dec 14 16:11:50 CET 2004     dak at cri:/usr/src/sys/i386/compile/CRI  i386
>Description:
cri# camcontrol inquiry da0
pass2: <ACTIONS USB DISK DEVICE 1.00> Removable Direct Access SCSI-2 device 
pass2: Serial Number 
pass2: 1.000MB/s transfers

Product : It's a ZICPlay USB MP3 Player with FM (seems to have a 'ACTIONS' firmware)

Before the quirk, when the key is plugged (no /dev/da* at this time) :

umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
(da0:umass-sim0:0:0:0): Synchronize cache failed, st
atus == 0x4, scsi status == 0x0
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT

dmesg output :

umass0: vendor 0x10d6 Actions USB Disk Device, rev 1.10/1.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ACTIONS USB DISK DEVICE 1.00> Removable Direct Access SCSI-2 device 
da0: 1.000MB/s transfers
da0: 249MB (510494 512 byte sectors: 64H 32S/T 249C)

usbdevs -v output (with my patch, since without, it hangs) :

Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
 port 1 powered
 port 2 addr 2: full speed, power 100 mA, config 1, Actions USB Disk Device(0x1000), vendor(0x10d6), rev 1.00
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), VIA(0x0000), rev 1.00

With my patch, /dev/da0 and /dev/da0s1 are created and I can mount /dev/da0s1 correctly.
>How-To-Repeat:
Just buy the same player and plug it.
>Fix:
--- /sys/cam/scsi/scsi_da.c     Sun Aug 29 13:10:09 2004
+++ scsi_da.c   Tue Dec 14 15:45:46 2004
@@ -314,6 +314,11 @@
                {T_DIRECT, SIP_MEDIA_REMOVABLE, "FL" , "NexIA+*", "*"},
                /*quirks*/ DA_Q_NO_SYNC_CACHE
        },
+       /* XXX */
+       {
+               {T_DIRECT, SIP_MEDIA_REMOVABLE, "ACTIONS*" , "USB DISK*", "*"},
+               /*quirks*/ DA_Q_NO_SYNC_CACHE
+       },
 };
>Release-Note:
>Audit-Trail:
>Unformatted: