i386/70926: 5.3Beta-1 bootstrap error: "atapci0: failed: rid 0x20
is memory, requested 4"
Jiafu He
jiafu_he at yahoo.com
Tue Aug 24 20:00:38 PDT 2004
>Number: 70926
>Category: i386
>Synopsis: 5.3Beta-1 bootstrap error: "atapci0: failed: rid 0x20 is memory, requested 4"
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Aug 25 03:00:38 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Jiafu He
>Release: 5.3Beta1
>Organization:
>Environment:
>Description:
Actually, Happy to see the progress. Release 5.2.1 ever screwed up the RAID array and destroyed the array info (refer to PR #i386/63828 on 2004/03/06). Now, looks like all is running well. Smooth installation, robust disk access. At least for the moment I didn't see any problem occured. However, the boot message "atapci0: failed: rid 0x20 is memory, requested 4" worries me. Not sure how serious this error is.
DMESG is:
=====================================================================
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA1 #0: Sat Aug 21 08:19:34 UTC 2004
root at mack.dcsl.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073152000 (1023 MB)
avail memory = 1040596992 (992 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
cpu1: <ACPI CPU (2 Cx states)> on acpi0
cpu2: <ACPI CPU (2 Cx states)> on acpi0
cpu3: <ACPI CPU (2 Cx states)> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> mem 0xe8000000-0xefffffff at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pci3: <ACPI PCI bus> on pcib3
atapci0: <Promise PDC20619 UDMA133 controller> port 0x2000-0x207f,0x2400-0x240f,0x2080-0x20ff mem 0xda100000-0xda11ffff,0xda120000-0xda120fff irq 24 at device 3.0 on pci3
atapci0: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
ata5: channel #3 on atapci0
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1840-0x185f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1860-0x187f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1880-0x189f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <multimedia, audio> at device 1.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xda200000-0xda203fff,0xda204000-0xda2047ff irq 17 at device 2.0 on pci5
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:81:00:00:20:15:bf
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:81:20:15:bf
fwe0: Ethernet address: 02:e0:81:20:15:bf
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x3040-0x307f mem 0xda220000-0xda23ffff irq 16 at device 3.0 on pci5
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:e0:81:51:1f:10
em0: Speed:N/A Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH4 UDMA100 controller> port 0x18a0-0x18af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
orm0: <ISA Option ROM> at iomem 0xe0000-0xe3fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
em0: Link is up 100 Mbps Full Duplex
ATAPI_RESET time = 3000us
acd0: DVDR <GENERIC DVD DUAL 4XMax/2.17> at ata0-master UDMA33
ad4: 117246MB <Maxtor 6Y120P0/YAR41BW0> [238216/16/63] at ata2-master UDMA133
ad6: 117246MB <Maxtor 6Y120L0/YAR41VW0> [238216/16/63] at ata3-master UDMA133
ad8: 117246MB <Maxtor 6Y120L0/YAR41VW0> [238216/16/63] at ata4-master UDMA133
ad10: 117246MB <Maxtor 6Y120L0/YAR41VW0> [238216/16/63] at ata5-master UDMA133
ar0: 232696MB <ATA RAID0+1 array> [29664/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad6 at ata3-master
disk2 READY on ad8 at ata4-master
disk3 READY on ad10 at ata5-master
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/ar0s2a
em0: Link is up 100 Mbps Full Duplex
=====================================================================
>How-To-Repeat:
Insert release 5.3Beta-1 disk 1 and error will show up.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-i386
mailing list