SSD errors
heasley
heas at shrubbery.net
Sun Oct 1 21:15:15 UTC 2017
Thu, Apr 13, 2017 at 08:59:32PM +0000, heasley:
> I have 4 SSDs in zfs raidz2 on 11.0-RELEASE-p2. There on QD sleds rated
> for sata6 to convert them from 2.5" to 3.5 slots in a Supermicro SC733TQ
> chassis (2012) with a Supermicro X10SRi-F mb and using the on-board
> controller (either one). I swapped the SATA cables for some with "extra
> shielding". And the 4 HDs used previously (mix of WD and seagate 750g
> and 2T) worked flawlessly.
I came upon this product last week, StarTech SATSABP425 4x2.5" SATA/SAS
disk chassis/backplane. Fits in a 5.25" chassis disk/CDrom slot and has
4 QD 2.5 SATA6 slots.
Moved the SSDs to this and the problem has disappeared. Normally, bonnie++
or zpool scrub would generate a ton of errors; zero errors now.
This problem may be related to these QD sleds[1]. AFAIK, the board on
that part is not active, it is just a pair of connectors. I have looked
for a sled without this board, but have not found one. This one[2] looked
promising, but it is not the correct fit.
The problem could still be the power supply or the disk backplane. I have
used these sleds with 4 other EVO SSDs (Pro and non-Pro versions), but they
are in an old Chenbro chassis.
[1] https://www.amazon.com/gp/product/B00F3QFKNS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
[2] https://www.amazon.com/gp/product/B0090UG55A/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Thanks for the other feedback about this.
More information about the freebsd-hardware
mailing list