Areca 1200 controller panics 7.1

[Rick Romero]

According to:  
ftp://ftp.areca.com.tw/RaidCards/AP_Drivers/FreeBSD/DRIVER/SourceCode/

There is a driver released 12/10/08.

According to SVN for FreeBSD 8.0, the current driver was committed 3
years ago.

Unless someone would like to step up and 'pop in' the new version to the
current kernel and save me some effort, I will be attempting my first
FreeBSD kernel compile after a good 8 years of use. :/

Procedure: 
1. Install FreeBSD 7.1 to a system without the Areca 1200 installed. 
2. Verify it's still not working after reboot and hardware install.
3. Compile the new kernel with new driver
4. Reboot using new kernel to verify build
5. Reinstall ARC1200
6. Watch what happens.  Report back here.

Rick

> (probe16:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step
> arcmsr0: isr get an illegal srb command doneacb=´0xffffffff8124e000´  
> srb=0xffff
> ffffaeb6c420´ srbacb=´0xffffffff8124e000´  
> startdone=0x3c3csrboutstandingcount=-1
> 
> 
> Fatal trap 12: page fault while in kernel mode
> cpuid = 0; apic id = 00
> fault virtual address = 0x34be2988
> fault code = supervisor read data, page not present
> instruction pointer = 0x8:0xffffffff807914c3
> stack pointer = 0x10:0xffffffffaecaab60
> frame pointer = 0x10:0xffffffff8124e000
> code segment = base 0x0, limit 0xfffff, type 0x1b
>                = DPL 0, pres 1, long 1, def32 0, gran 1
> processor eflags = interrupt enabled, resume, IOPL = 0
> current process = 36 (irq17: arcmsr0)
> trap number = 12
> panic: page fault
> 
> 
> _______________________________________________
> freebsd-hardware at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe at freebsd.org"