[if_re.c] INTEL mini/itx DE945GSEJT

[Frank Reppin]

Hi all and
hi Jonas!

Jonas Lund wrote:
> If you've just purchased a new board i think you could try it out as
> you install it. Apart from the mentioned things boards usually
> contains the same chipsets as other boards so chances are it'll work.
> And if not directly then under some compat mode (Altho could be with
> reduced speed)
> 
> And if realtek does provide source for their drivers i'd prolly not be
> too worried. The shitties drivers i've used was some crap produced by
> some random chineese chip-shop that had delay(10000) or something
> alike it inside kernel-code (That's right.. it waited 10 seconds in
> kernel for no apperant reason!) but the code was functional with this
> removed.
> 
> 2009/8/5 Frank Reppin <frank at undermydesk.org>:
>> Hi all,
>>
>> just purchased the above mentioned board:
>>
>> http://www.intel.com/products/desktop/motherboards/D945GSEJT/D945GSEJT-overview.htm

Thankyou so far... and thankyou to if_re.c maintainer(s)... the 
mainboard in question is indeed supported by FreeBSD' if_re.c in
at least -CURRENT (I've performed an initial install using the latest 
[2009-06] current snapshot ISO and I've later [2009-08-10... late 
evening] upgraded to 8.2 beta.

coretemp (4) seems to also work as intended as well as powerd without
any flaws... at a first glance.

Cheers,

frank

-- 

http://www.undermydesk.org