Cronyx OMEGA-PCI on FreeBSD 7.0

[m0ps]

is the next big challenge:
i'm have old server with freebsd 4. xx that has an multiport pci card Cronyx
OMEGA-PCI which are connected to dialup modems.
i'm need move this server to another hardware, and update to FreeBSD 7.0.
as it became known from the site of producer of card, in order that the card
would be brought to freebsd above 6.x Boards need to make emulation mode
MOXA and compile kernel with device puc, which was successfully done. after
reboot with the new kernel machine saw 8 com ports in this form:

     uart0: <Non-standart ns8250 class UART with FIFOs> on puc0
     uart0: [FILTER]
     uart1: <Non-standart ns8250 class UART with FIFOs> on puc0
     uart1: [FILTER]
     uart2: <Non-standart ns8250 class UART with FIFOs> on puc0
     uart3: [FILTER]
     uart3: <Non-standart ns8250 class UART with FIFOs> on puc0
     uart3: [FILTER]
     uart4: <Non-standart ns8250 class UART with FIFOs> on puc0
     uart4: [FILTER]
     uart5: <Non-standart ns8250 class UART with FIFOs> on puc0
     uart5: [FILTER]
     uart6: <Non-standart ns8250 class UART with FIFOs> on puc0
     uart6: [FILTER]
     uart7: <Non-standart ns8250 class UART with FIFOs> on puc0
     uart7: [FILTER]



in / dev created devices from cuau0 to cuau7

the first port to join dialup modem (us robotics) try to check his work:
cu-l / dev/cuau0-s 57600

in response getting Connected, enter AT but did not get a response, instead,
begins to run the cursor across the screen. (in the sense I can move his
keys in the direction of any part)

I understand that the problem in the cards (more accurately tell the
driver), because modem and pci-card verified on the old server

I may do something wrong?
advance grateful for the assistance.

P.S. sorry for my english


-- 
best regards, m0ps