MPT SAS1064

[Mike Tancsa]

Hi,

One of our suppliers sent us an MPT adaptor (SAS1064? screen capture 
below) to evaluate.  Seems like a fairly decent adaptor speed / 
feature wise, but I cant seem to figure out a way to monitor the 
status of the array ?  Is there a way to do so from RELENG_6 ?

         ---Mike


| LSI Logic MPT Setup Utility  v6.04.00.00 
(2005.08.29)                        |
| Adapter List  Global 
Properties                                              |
| Adapter    PCI  PCI  PCI  PCI   FW 
Revision          Status    Boot          |
|            Bus  Dev  Fnc  Slot 
Order         |
| 
SAS1064    03   01   00   02    1.06.00.00-IR        Enabled   0            |

[tyan-1u]% dmesg | grep mpt
mpt0: <LSILogic SAS/SATA Adapter> port 0xd800-0xd8ff mem 
0xdfefc000-0xdfefffff,0xdfee0000-0xdfeeffff irq 48 at device 1.0 on pci3
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.5.10.0
mpt0: mpt_cam_event: 0xb
mpt0: Unhandled Event Notify Frame. Event 0xb (ACK not required).
da0 at mpt0 bus 0 target 8 lun 0
[tyan-1u]% dmesg | grep da0
da0 at mpt0 bus 0 target 8 lun 0
da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device
da0: 300.000MB/s transfers, Tagged Queueing Enabled
da0: 75340MB (154296320 512 byte sectors: 255H 63S/T 9604C)
[tyan-1u]%

mpt0 at pci3:1:0:  class=0x010000 card=0x30201000 chip=0x00501000 
rev=0x02 hdr=0x00
     vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
     class      = mass storage
     subclass   = SCSI
     cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
     cap 05[98] = MSI supports 1 message, 64 bit
     cap 07[68] = PCI-X 64-bit supports 133MHz, 2048 burst read, 16 
split transactions
     cap 11[b0] = MSI-X supports 1 message in map 0x14


--------------------------------------------------------------------
Mike Tancsa,                                      tel +1 519 651 3400
Sentex Communications,                            mike at sentex.net
Providing Internet since 1994                    www.sentex.net
Cambridge, Ontario Canada                         www.sentex.net/mike