Network controller: RaLink RT2561/RT61 rev B 802.11g - Any support for it?

[Steve Franks]

Might have to "kldload if_ral".  If that works (device shows up after
an ifconfig), you'll have to modify /boot/loader.conf to always load
if_ral on startup.  I have one of these exact cards, but since it's
not HP certified, my bios freezes the system if you put it in, hence,
haven't tested it.  "man wlan" seems to state that it is supported,
however.

Steve

On 2/5/07, Dan A. <infernal211283.freebsd at gmail.com> wrote:
> Hi,
>
> I'm running FreeBSD 6.2 on MSI M670, it has a wireless card which I didn't
> find support for.
>
> My lspci -v show this:
>
> "04:09.0 Network controller: RaLink RT2561/RT61 rev B 802.11g
> Subsystem: Micro-Star International Co., Ltd. Unknown device b833
> Flags: bus master, slow devsel, latency 64, IRQ 18
> Memory at febf0000 (32-bit, non-prefetchable)
> Capabilities: [40] Power Management version 2"
>
> and from M$ window$ it it looks like this:
>
> "802.11g MiniPCI Wireless Adapter"
>
> and it works fine on window$ so I know it's not broken.
>
> Thanks.
> _______________________________________________
> freebsd-hardware at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe at freebsd.org"
>


-- 
Steve Franks, KE7BTE
Staff Engineer
La Palma Devices, LLC
http://www.lapalmadevices.com
(520) 312-0089