Problem configuring sound device on hp compaq

[Sam Pfeormon]

Hi, my apologies if this is not the correct list to ask this.

I'm having a problem getting sound to work on my PC at work.

The hardware is an hp compaq (that's all I know), relatively
new.  I've added the "device pcm" into the config file and
rebuilt world but when I reboot sound doesn't work and
xemacs crashes when it tries to use it.

Appended is the output from /dev/sndstat and dmesg
Any advice or help would be appreciated.

d

p.s. please reply to this list since I don't read email
at this account.  thx in advance

----------------------------------------

FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <Intel ICH5 (82801EB)> at io 0xfc800400, 0xfc800600 irq 5 bufsz
16384 (1p/1r/4v channels duplex)

----------------------------------------

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #5: Thu Apr  1 14:04:45 EST 2004
    root at sedna.somewhere.com:/usr/obj/usr/src/sys/SEDNA
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.71-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1073741824 (1048576K bytes)
config> di bt0
No such device: bt0
Invalid command or syntax.  Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax.  Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax.  Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax.  Type `?' for help.
config> q
avail memory = 1041227776 (1016824K bytes)
Preloaded elf kernel "kernel" at 0xc03d7000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03d709c.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00ec970
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf4000000-0xf7ffffff at
device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2571)> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 017a graphics accelerator> at 0.0 irq 10
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1440-0x145f irq
11 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1460-0x147f irq
5 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1480-0x149f irq
10 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 10
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on
pci0
pci5: <PCI bus> on pcib2
bge0: <Broadcom BCM5782 Gigabit Ethernet, ASIC rev. 0x3003> mem
0xfc300000-0xfc30ffff irq 5 at device 2.0 on pci5
bge0: Ethernet address: 00:0d:9d:9f:61:f7
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 ATA100 controller> port
0x14c0-0x14cf,0x1804-0x1807,0x14e8-0x14ef,0x1800-0x1803,0x14e0-0x14e7 irq
10 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <Intel ICH5 SATA150 controller> port
0x14d0-0x14df,0x180c-0x180f,0x14f8-0x14ff,0x1808-0x180b,0x14f0-0x14f7 irq
10 at device 31.2 on pci0
ata2: at 0x14f0 on atapci1
ata3: at 0x14f8 on atapci1
pcm0: <Intel ICH5 (82801EB)> port 0x1400-0x143f,0x1000-0x10ff mem
0xfc800600-0xfc8006ff,0xfc800400-0xfc8005ff irq 5 at device 31.5 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
orm0: <Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xd17ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 76319MB <Maxtor 6Y080L0> [155061/16/63] at ata0-master UDMA100
ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
acd0: CD-RW <LITE-ON COMBO LTC-48161H> at ata1-master UDMA33
acd1: CDROM <HL-DT-ST CD-ROM GCR-8482B> at ata1-slave WDMA2
Mounting root from ufs:/dev/ad0s1a


=====


______________________________________________________________________ 
Post your free ad now! http://personals.yahoo.ca