asr monitoring

[Mike Tancsa]

I am running with
FE7X 1.05.00.023
BE7X 1.08.00.036

on a number of 7xxxx cards with good results.   The only heavily used 
RAID10 I have is on a 6xxx series card. Most are Intel boards, but I do 
have one dual MP 2000 board that runs RAID1 on a 7000 board.

         ---Mike

At 04:33 PM 16/11/2003, Douglas K. Rand wrote:
>Mike> This is really odd. We have quite a few cards deployed on
>Mike> FreeBSD and have none of these problems.  Which 3ware cards are
>Mike> you using? What is the firmware rev?
>
>What really worries me about this is that the mirror set gets
>corrupted WITHOUT the 3ware controller knowing about it.
>
>The system we have the recurring problems with is:
>
>    o FreeBSD 4.8
>    o 3ware 7506-4LP
>    o 4 x IBM 120GB IC35L120AVVA07 disks
>    o Tyan 2460 Tiger MP
>    o 1 GB of Micron ECC RAM
>    o 2 x AMD Athlon(tm) MP 2000+
>    o (I don't have the BIOS rev, the card is out of the system right
>      now)
>
>Other systems we've had the problem in:
>
>    o FreeBSD 4.7
>    o 3ware 7500-4LP
>    o 4 x IBM 80GB IC35L080AVVA07 disks
>    o Tyan 2460 Tiger MP
>    o 1 GB of Micron ECC RAM
>    o 2 x AMD Athlon(tm) MP 2000+
>    o twe0: 4 ports, Firmware FE7X 1.04.00.024, BIOS BE7X 1.07.02.008
>
>
>    o FreeBSD 4.8
>    o 3ware 7450
>    o 4 x IBM 75GB DTLA-307075 disks
>    o SuperMicro P6DBS
>    o 768 MB of Micron ECC RAM
>    o 2 x Pentium II 400MHz
>    o twe0: 4 ports, Firmware FE7X 1.03.09.027, BIOS BE7X 1.07.02.002