Fw: Asus P4PE

[Sid Lambert]

That is what I thought also after reading if_bge.c, but the device is not
detected. Here is some information I gathered.

<root at rack:/home/azoos> dmesg | grep "irq 10"
pci2: <unknown card> (vendor=0x14e4, dev=0x4401) at 5.0 irq 10

<root at rack:/home/azoos> pciconf -l | grep none
none0 at pci2:5:0: class=0x020000 card=0x80a81043 chip=0x440114e4 rev=0x01
hdr=0x00

I get the same from GENERIC 4.8 as well as custom 4.8 kernels. Any other
suggestions?

Sid

----- Original Message -----
From: "Marc Fonvieille" <blackend at freebsd.org>
To: "Sid Lambert" <sidlambert at adelphia.net>
Cc: <freebsd-hardware at freebsd.org>
Sent: Saturday, April 26, 2003 4:34 AM
Subject: Re: Fw: Asus P4PE


> On Fri, Apr 25, 2003 at 08:10:07AM -0400, Sid Lambert wrote:
> >  Is the Promise ATA RAID onboard PDC20376 chipset supported in 4.x?  And
> > what
> > about the Broadcom BCM5702 onboard NIC? I glanced around the source and
> > website but do not see the appropriate driver for either device.
> >
>
> Hi Sid,
>
> For the BCM5702 you should look at bge(4) manual page.
>
> Marc
>